{"title":"On-board installation","description":"\u003ch2\u003ephilippi onboard installation – cables, main switches, fuses \u0026amp; connection technology for boats, yachts \u0026amp; vehicles\u003c\/h2\u003e\n\u003cp\u003eEverything for a professional and safe onboard electrical system: circuit breakers, distribution busbars, fuses, terminal blocks, installation systems, busbars and battery main switches as well as suitable cables, installation aids and cable lugs. The philippi onboard installation collection includes all components required for a standard-compliant, reliable and durable 12, 24 and 48 V DC onboard electrical system on boats, yachts, motorhomes and expedition vehicles – clearly summarized in one collection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrief explanation:\u003c\/strong\u003e A safe onboard installation doesn't start at the switch panel – it starts directly at the battery. Every cable must be fused appropriately for its cross-section, every connection must have permanent contact reliability, and every main switch must be correctly dimensioned. This collection provides all the building blocks for this.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat constitutes a professional onboard installation?\u003c\/h3\u003e\n\u003cp\u003eA standard-compliant onboard installation according to DIN EN ISO 13297 consists of much more than just cables and switches. From the battery terminal to the last consumer, every component must be coordinated – in terms of cross-section, fusing, and connection quality. Poor connections, incorrectly sized cables, or missing fuses are the most common causes of onboard fires, system failures, and battery damage.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eOverview of the product areas in the collection\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBattery main switches\u003c\/strong\u003e Battery main switches are used to disconnect the 12, 24 or 48 V DC battery system when not in use or during service work. Accidental deep discharge during long periods of inactivity can also be reliably prevented by models with integrated deep discharge protection. philippi offers manual main switches up to 500 A as well as remotely controllable variants (FBR, THR, FHC) for electrical main current disconnection without direct access to the switch – ideal for use in hard-to-reach areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemotely controllable main switches \u0026amp; deep discharge protection\u003c\/strong\u003e Remotely controllable main switches allow battery disconnection from the helm or cockpit. Deep discharge protection relays automatically disconnect the consumer battery as soon as the voltage drops below a critical value – reliably protecting the battery from irreversible deep discharge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuses – from low current to high current\u003c\/strong\u003e Every wire needs a fuse matched to its cross-section. The collection covers the complete spectrum: automotive blade fuses and fuse holders for small consumers, strip fuses (ANL, MIDI, MEGA) for medium currents, and bolt-down fuses (SHB\/MRBF) and Class-T fuses for high current circuits up to 600 A. All types are available in suitable holders and distribution blocks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuse distributors \u0026amp; circuit breakers\u003c\/strong\u003e Thermal circuit breakers (panel-mount and switch-panel circuit breakers) from 25–200 A allow resetting after tripping without changing fuses. SafetyHub fuse distributors combine MIDI high-current fuses and automotive blade fuses in an ignition-protected, IP-66-rated housing – suitable for both gasoline and diesel-powered boats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBusbars \u0026amp; power distributors\u003c\/strong\u003e Busbars made of solid, tin-plated or nickel-plated electrical copper bundle multiple cable outputs to a common positive or negative potential – with minimized contact resistance and for continuous currents from 100 A to 1000 A. Available as compact SMS rails, powerful PowerBar rails, MSS negative pole busbars, and as two-pole DualBus units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTerminal blocks\u003c\/strong\u003e Terminal blocks enable structured, detachable cable connections in control cabinets and on distribution plates – the clean and clear solution for all permanent installations with multiple outputs and clearly separable circuits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCables\u003c\/strong\u003e Onboard cables for fixed DC installation: flexible copper strands in marine-grade design, for 12, 24 or 48 V onboard electrical systems. Available in all common cross-sections from 1.5 mm² to 120 mm² – by the meter, on a reel or pre-assembled. For main power cabling between battery, main switch and distributor, and for all consumer lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnection technology – cable lugs, wire end ferrules \u0026amp; crimping tools\u003c\/strong\u003e Tubular cable lugs for fine-stranded conductors, E-Cu material, tinned surface according to DIN 40500. The connection technology collection includes ring and tubular cable lugs in all common cross-sections, insulated and uninsulated variants, spade terminals and spade receptacles, crimp connectors, and professional crimping tools – for permanently secure, corrosion-resistant connections on board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWaterproof junction boxes\u003c\/strong\u003e For cable connections and branches in damp or splash-exposed areas: waterproof junction boxes in various sizes – for use in the bilge, engine compartment, or cockpit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitches \u0026amp; indicator lights\u003c\/strong\u003e Individual switches, momentary switches, and indicator lights as single components – for individual additions to existing systems, special installations, and spare parts.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat really matters in onboard installation\u003c\/h3\u003e\n\u003cp\u003eA professional onboard installation depends on three factors: correct dimensioning, quality of connections, and comprehensive fusing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCable cross-section and fusing:\u003c\/strong\u003e The fuse size always follows the cable cross-section – not the consumer power. Undersized cross-sections and oversized fuses are the most common source of errors in onboard electrical systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnection quality:\u003c\/strong\u003e Oxidized or poorly crimped connections create contact resistance, which at high currents leads to heat generation, voltage drop, and in the worst case, cable fires. Tinned cable lugs and professional crimping tools are not a luxury – they are a safety standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMain switch close to the battery:\u003c\/strong\u003e The main fuse and battery main switch should be as close as possible to the battery – the unfused cable section between the battery and the first fuse carries the greatest risk in the entire onboard electrical system.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFrequently Asked Questions about Onboard Installation\u003c\/h3\u003e\n\u003ch4\u003eWhich cable cross-section do I need for my cables?\u003c\/h4\u003e\n\u003cp\u003eIt depends on the current, the cable length and the permitted voltage drop; the calculation uses the outgoing and return conductor together. Example: a 10 A load at 12 V, three metres from the distribution panel, needs 4 mm² for a voltage drop of no more than 3 %. At 10 A, 1.5 mm² is only enough for about 1.5 m. The \u003ca href=\"\/en\/pages\/kabel-konfektion-konfigurator\"\u003ecable configurator\u003c\/a\u003e calculates cross-section and fuse automatically.\u003c\/p\u003e\n\u003ch4\u003eDoes every cable need to be individually fused?\u003c\/h4\u003e\n\u003cp\u003eYes. Every cable leaving the battery or a distributor needs its own fuse matched to its cross-section – this is what ISO 13297 requires. The fuse sits as close as possible to the start of the cable, because it protects the cable, not the device. An unfused section between the battery and the first fuse is the biggest fire risk in the system.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between a bolt-down fuse and a strip fuse?\u003c\/h4\u003e\n\u003cp\u003eBoth protect main cables carrying high currents. Bolt-down fuses (SHB, MRBF) are very compact and sit directly on the battery terminal or right next to it, for currents up to 300 A. Strip fuses (ANL, MIDI, MEGA) need their own holder and a little more space, but work well in distribution panels. Large lithium battery banks often require a Class T fuse because of its breaking capacity.\u003c\/p\u003e\n\u003ch4\u003eWhat does tinned surface mean for cable lugs?\u003c\/h4\u003e\n\u003cp\u003eTinned copper cable lugs are coated with a thin layer of tin. It protects the copper from oxidation, which sets in quickly in the salty, humid air on board. Bare copper gradually forms an oxide layer that increases contact resistance, heats the connection and costs voltage. Tinned cable lugs keep the contact low-resistance for years and are standard on board.\u003c\/p\u003e\n\u003ch4\u003eWhy do I need deep discharge protection?\u003c\/h4\u003e\n\u003cp\u003eDeep discharge protection automatically disconnects the service battery from the system as soon as its voltage falls below an adjustable limit. Standby loads and self-discharge therefore cannot drain the battery so far that it permanently loses capacity. This matters most in winter storage and during longer absences; with lithium batteries, the built-in BMS usually takes over this task.\u003c\/p\u003e","products":[{"product_id":"dc-distribution-500","title":"DC Distribution 500","description":"\u003cp\u003e\u003cb\u003eThe Mastervolt DC Distribution 500 is the most compact DC fuse distributor in the MasterBus system family and distributes power from a 12V, 24V or 48V onboard battery to up to four DC devices such as a battery charger, inverter, alternator or solar panel.\u003c\/b\u003e It is designed for 300 A continuous current or 500 A for 5 minutes and automatically reports fuse states to the MasterBus displays. philippi supplies the Mastervolt DC Distribution 500 as a Mastervolt system partner.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages at a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCombines up to four DC devices at one distribution point – significantly less wiring effort than with individual fuse holders.\u003c\/li\u003e\n\u003cli\u003eAutomatic fuse monitoring with alarm message, instead of manual visual inspection of each ANL fuse.\u003c\/li\u003e\n\u003cli\u003eEasyView plain-text display names connected devices instead of just fuse numbers.\u003c\/li\u003e\n\u003cli\u003eVery compact design (150 x 216 x 65 mm, 1.2 kg) for installation even in confined spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe DC Distribution 500 is designed for onboard electrical systems in which several high-current loads – such as a battery charger, inverter, alternator and solar charge controller – are to be protected centrally and clearly. Instead of individual fuse holders with confusing wiring, the DC Distribution 500 provides up to four ANL fuse positions (2x 80 A, 160 A and 125 A) at one distribution point and automatically reports the status of each fuse via the MasterBus network.\u003c\/p\u003e\n\n\u003cp\u003eAs a Mastervolt system partner, philippi supplies the DC Distribution 500 including matching MasterBus accessories (terminator, connection cable) and supports the integration into your Mastervolt onboard electrical system.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003ctable summary=\"\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eM77020200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBattery voltage\u003c\/th\u003e\n\u003ctd\u003e12, 24 or 48 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCurrent\u003c\/th\u003e\n\u003ctd\u003e300 A continuous \/ 500 A for 5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFuse positions\u003c\/th\u003e\n\u003ctd\u003e4x ANL fuses (2x 80 A, 1x 160 A, 1x 125 A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection class\u003c\/th\u003e\n\u003ctd\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCommunication\u003c\/th\u003e\n\u003ctd\u003eMasterBus (Plug \u0026amp; Play), incl. terminator and connection cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (H x W x D)\u003c\/th\u003e\n\u003ctd\u003e150 x 216 x 65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart of the Mastervolt MasterBus network, EasyView display with plain-text names of connected devices.\u003c\/li\u003e\n\u003cli\u003eCan be used equally in 12V, 24V and 48V onboard electrical systems.\u003c\/li\u003e\n\u003cli\u003eIntegration into the philippi P-Bus system is currently not documented for the DC Distribution 500; the distributor operates independently in the Mastervolt MasterBus network.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently asked questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eHow many devices can I connect to the DC Distribution 500?\u003c\/b\u003e\u003cbr\u003eUp to four DC devices, for example a battery charger, inverter, alternator and solar panel, via four ANL fuse positions.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhich onboard system voltage is the DC Distribution 500 suitable for?\u003c\/b\u003e\u003cbr\u003eIt is designed for 12V, 24V and 48V onboard electrical systems.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWill I recognise a blown fuse automatically?\u003c\/b\u003e\u003cbr\u003eYes, the fuse status is monitored and, if a fuse blows, reported as an alarm via the MasterBus network.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAre accessories for the MasterBus connection included in the scope of delivery?\u003c\/b\u003e\u003cbr\u003eYes, the MasterBus terminator and connection cable are included in the scope of delivery.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eRequest advice on the DC Distribution 500 from philippi now.\u003c\/b\u003e\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":52832127025489,"sku":"M77020200","price":404.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/M77020200.png?v=1768491116"},{"product_id":"bs-11003","title":"BS 11003","description":"\u003cp\u003eThe BS 11003 from Blue Sea Systems is a three-position heavy-duty battery master switch (Selector 3 Position) for ignition-protected installation on gasoline boats. It selectively connects isolated battery banks to consumers and features integrated Alternator Field Disconnect.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eIgnition protected for safe installation on gasoline boats\u003c\/li\u003e\n\n\u003cli\u003eIntegrated Alternator Field Disconnect (AFD) protects the alternator diodes\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stainless steel flange nuts for secure, durable connections\u003c\/li\u003e\n\n\u003cli\u003eTactile detent indicator shows switch position even without visual contact\u003c\/li\u003e\n\n\u003cli\u003eFits common Perko and Guest hole patterns (low amperage), surface or rear panel mounting possible\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch Type: Selector, 3 Positions\u003c\/li\u003e\n\n\u003cli\u003eCranking Current (30 sec.): 1600 A\u003c\/li\u003e\n\n\u003cli\u003eShort-Time Current (5 min.): 700 A\u003c\/li\u003e\n\n\u003cli\u003eContinuous Current: 500 A\u003c\/li\u003e\n\n\u003cli\u003eMaximum Operating Voltage: 32V DC\u003c\/li\u003e\n\n\u003cli\u003eConnection studs for 1\/2\" ring terminals (M12), suitable for up to 4\/0 AWG (approx. 120 mm²) battery cables\u003c\/li\u003e\n\n\u003cli\u003eApproval: CE, ISO 8846, UL 1107, complies with ABYC requirements, UL 1500 and SAE J1171 (Ignition Protection)\u003c\/li\u003e\n\n\u003cli\u003eProtection Class: IP66 – protected against powerful water jets\u003c\/li\u003e\n\n\u003cli\u003eOptional Accessories: Icon label set 7902 (sold separately)\u003c\/li\u003e\n\n\u003cli\u003eSKU 700111003\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the BS 11003 battery master switch suitable for?\u003c\/h3\u003e\u003cp\u003eThe BS 11003 is used on gasoline boats with multiple battery banks when engine and house batteries need to be selectively connected to onboard consumers, either individually or together, and an ignition-protected installation near the engine compartment is required.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832128532817,"sku":"700111003","price":153.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700111003.png?v=1792761745"},{"product_id":"12-p10","title":"Plug-in base for automotive fuse 12-P10","description":"\u003cp\u003eThe 12-P10 plug-in base for automotive fuses from e-t-a is a base for circuit breakers of series 1170 and 1610, which can be strung together on a 35 mm DIN rail or alternatively is suitable for floor mounting.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eFlexible to use thanks to DIN rail or floor mounting\u003c\/li\u003e\n\n\u003cli\u003eCompatible with circuit breakers of series 1170 and 1610\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eSeries 1170 and 1610\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eFlat plug 6.3 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eW 12.7 x H 47 x D 58 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e35 mm DIN rail or floor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"E-T-A","offers":[{"title":"Default Title","offer_id":52832128762193,"sku":"111709000","price":7.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/111709000.png?v=1768491121"},{"product_id":"skl-122223201-skl-b","title":"SKL fuse terminal","description":"\u003cp\u003eThe SKL fuse terminal by e-t-a is an input-side bridgeable fuse terminal for circuit breakers of the 1610 series for DIN rail mounting in fuse distribution panels.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eInput-side bridgeable for supplying multiple circuits from a single source\u003c\/li\u003e\n\n\u003cli\u003eConnection via screw terminals for cable cross-sections up to 6 mm² – without crimping tools\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eScrew terminals, max. 6 mm²\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eBridging version SKL-B\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e10-pole, separable, max. 34 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eL 65 x H 47 x W 8 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eDIN rail\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"E-T-A","offers":[{"title":"SKL","offer_id":53424219455825,"sku":"122223301","price":13.6,"currency_code":"EUR","in_stock":true},{"title":"SKL-B","offer_id":53424219488593,"sku":"122223201","price":8.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/122223301.png?v=1768491121"},{"product_id":"powerbar1000-8-x-3-8-bolzen-mit-abdeckung","title":"Busbar PowerBar1000 1990","description":"\u003cp\u003eThe PowerBar1000 1990 busbar (Blue Sea Systems BS 1990) is a high-load busbar made of tin-plated, high-purity electrolytic copper for 1000 A, serving as a central connection point for large and small conductors in complex on-board networks. The stepped busbar design with two connection levels ensures significantly higher connection density than conventional busbars.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTin-plated high-purity electrolytic copper for maximum conductivity\u003c\/li\u003e\n\n\u003cli\u003eStepped busbar design with two levels doubles the possible conductor density compared to classic busbars\u003c\/li\u003e\n\n\u003cli\u003eConnection heights suitable for common fuse holder blocks – multiple fuse blocks can be directly attached without additional connecting cables\u003c\/li\u003e\n\n\u003cli\u003eOne-piece serrated flange nuts for secure main connections\u003c\/li\u003e\n\n\u003cli\u003eAdditional #8-32 stainless steel screws with fixed lock washers for smaller conductor cross-sections\u003c\/li\u003e\n\n\u003cli\u003eBusbar can be shortened if space is limited\u003c\/li\u003e\n\n\u003cli\u003eBidirectional end caps allow multiple PowerBar1000 busbars to be ganged together\u003c\/li\u003e\n\n\u003cli\u003ePlug-in insulating cover meets ABYC\/USCG requirements, with recess for labeling\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 1000 A\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 150 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e8 threaded studs 3\/8\"-16\u003c\/li\u003e\n\n\u003cli\u003e5 screw terminals #10-32 and 11 screw terminals #8-32\u003c\/li\u003e\n\n\u003cli\u003eWith cover (Cover 2730B)\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tin-plated electrolytic copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eSKU 700101990\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar1000 1990 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar1000 1990 is suitable for large, complex on-board networks where both main lines with 3\/8\" ring terminals and numerous smaller control and auxiliary lines are to be brought together at a single, clear collection point – for example, as a central positive or ground busbar with directly attached fuse blocks. If even higher demand arises, multiple PowerBar1000 busbars can be ganged together via the end caps.\u003c\/p\u003e\u003cp\u003eFor professional 1000 A power distribution with high connection density, the PowerBar1000 1990 is the ideal solution.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832129450321,"sku":"700101990","price":220.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700101990_f7d66d97-cc34-4822-b96b-cf8a82e507d9.png?v=1786391310"},{"product_id":"powerbar1000-12-x-3-8-bolzen-mit-abdeckung","title":"Busbar PowerBar1000 1991","description":"\u003cp\u003eThe PowerBar1000 busbar 1991 (Blue Sea Systems BS 1991) is the 1000-A PowerBar1000 series version with twelve 3\/8\"-16 threaded studs, offering the highest number of connections in the series for large and small conductors in complex onboard electrical systems.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTin-plated high-purity electrolytic copper for maximum conductivity\u003c\/li\u003e\n\n\u003cli\u003eStepped busbar design with two levels doubles the possible conductor density compared to classic busbars\u003c\/li\u003e\n\n\u003cli\u003eConnection heights match common fuse holder blocks – multiple fuse blocks can be directly connected without additional connecting cables\u003c\/li\u003e\n\n\u003cli\u003eTwelve main studs for maximum number of connections on a single busbar\u003c\/li\u003e\n\n\u003cli\u003eAdditional #8-32 stainless steel screws with captive lock washers for smaller conductor cross-sections\u003c\/li\u003e\n\n\u003cli\u003eBidirectional end caps allow the interconnection of multiple PowerBar1000 busbars\u003c\/li\u003e\n\n\u003cli\u003ePluggable insulating cover meets ABYC\/USCG requirements, with recess for labeling\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 1000 A\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 150 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e12 threaded studs 3\/8\"-16\u003c\/li\u003e\n\n\u003cli\u003e5 screw terminals #10-32 and 11 screw terminals #8-32\u003c\/li\u003e\n\n\u003cli\u003eWith cover (Cover 2731B)\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tin-plated electrolytic copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eSKU 700101991\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar1000 1991 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar1000 1991 is suitable for very large onboard electrical systems with numerous main lines that need to be brought together at a single 1000 A collection point. With twelve stud connections, it offers additional capacity compared to the 1990 version for further main consumers or charging sources.\u003c\/p\u003e\u003cp\u003eFor the maximum number of connections at 1000 A, the PowerBar1000 1991 is the consistent choice.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832129778001,"sku":"700101991","price":274.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700101991_PowerBar1000_0ae50f3c-6375-488a-99c1-84b467bb3775.png?v=1786391311"},{"product_id":"powerbar1000-8-x-5-16-bolzen-mit-abdeckung","title":"Busbar PowerBar1000 1992","description":"\u003cp\u003eThe PowerBar1000 1992 busbar (Blue Sea Systems BS 1992) is a high-load busbar from the PowerBar1000 series with eight 5\/16\"-18 threaded studs and serves as a central connection point for large and small conductors in complex onboard electrical systems.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTin-plated high-purity electrolytic copper for maximum conductivity\u003c\/li\u003e\n\n\u003cli\u003eStepped rail design with two levels doubles the possible conductor density compared to classic busbars\u003c\/li\u003e\n\n\u003cli\u003eConnection heights suitable for common fuse holder blocks – multiple fuse blocks can be directly attached without additional connecting cables\u003c\/li\u003e\n\n\u003cli\u003e5\/16\" stud size for cable lugs with a smaller hole diameter than the 3\/8\" versions 1990\/1991\u003c\/li\u003e\n\n\u003cli\u003eAdditional #8-32 stainless steel screws with captive lock washers for smaller conductor cross-sections\u003c\/li\u003e\n\n\u003cli\u003eBidirectional end caps allow multiple PowerBar1000 busbars to be interconnected\u003c\/li\u003e\n\n\u003cli\u003ePluggable insulating cover meets ABYC\/USCG requirements, with recess for labeling\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 1000 A\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 150 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e8 threaded studs 5\/16\"-18\u003c\/li\u003e\n\n\u003cli\u003e5 screw terminals #10-32 and 11 screw terminals #8-32\u003c\/li\u003e\n\n\u003cli\u003eWith cover (Cover 2730B)\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tin-plated electrolytic copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eSKU 700101992\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar1000 1992 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar1000 1992 is suitable for onboard electrical systems where cable lugs with a 5\/16\" hole diameter are used, for example, with certain battery or inverter connections. It offers the same 1000 A continuous current rating and connection density as the 3\/8\" version 1990, but with suitable studs for smaller ring terminals.\u003c\/p\u003e\u003cp\u003eThose who use cable lugs with a 5\/16\" bore will find the right 1000 A busbar in the PowerBar1000 1992.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832130040145,"sku":"700101992","price":220.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700101992_PowerBar1000_38430bb9-3f0e-4090-b1d7-4af863a541b5.png?v=1786391314"},{"product_id":"powerbar1000-12-x-5-16-bolzen-mit-abdeckung","title":"Busbar PowerBar1000 1993","description":"\u003cp\u003eThe PowerBar1000 1993 (Blue Sea Systems BS 1993) busbar is the version of the PowerBar1000 series with twelve 5\/16\"-18 threaded studs, offering the highest number of connections combined with a smaller stud diameter for large and small conductors in complex electrical systems.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTin-plated high-purity electrolytic copper for maximum conductivity\u003c\/li\u003e\n\n\u003cli\u003eStepped two-level busbar design doubles the possible conductor density compared to classic busbars\u003c\/li\u003e\n\n\u003cli\u003eConnection heights match common fuse holder blocks – multiple fuse blocks can be directly attached without additional connecting cables\u003c\/li\u003e\n\n\u003cli\u003eTwelve 5\/16\" main studs for maximum connection count with a smaller hole diameter\u003c\/li\u003e\n\n\u003cli\u003eAdditional #8-32 stainless steel screws with captive lock washers for smaller conductor cross-sections\u003c\/li\u003e\n\n\u003cli\u003eBidirectional end caps allow multiple PowerBar1000 busbars to be interconnected\u003c\/li\u003e\n\n\u003cli\u003eSnap-on insulating cover meets ABYC\/USCG requirements, with recess for labeling\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 1000 A\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 150 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e12 threaded studs 5\/16\"-18\u003c\/li\u003e\n\n\u003cli\u003e5 screw terminals #10-32 and 11 screw terminals #8-32\u003c\/li\u003e\n\n\u003cli\u003eWith cover (Cover 2731B)\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tin-plated electrolytic copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eSKU 700101993\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar1000 1993 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar1000 1993 is suitable for very large electrical systems with many main lines where the cable lugs have a 5\/16\" bore. With twelve stud connections, it offers additional capacity for further main consumers or charging sources compared to the 1992 version, while maintaining the same 1000 A continuous current rating.\u003c\/p\u003e\u003cp\u003eFor the maximum number of connections with 5\/16\" cable lugs, the PowerBar1000 1993 is the logical choice.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832130236753,"sku":"700101993","price":274.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700101993_PowerBar1000_7616d3a8-c9a6-464f-bfcd-1ebca415c634.png?v=1786391315"},{"product_id":"dfb","title":"DFB implementation bolt","description":"\u003cp\u003eThe Blue Sea Systems (BSS 2203\/2204) feed-through bolt (DFB) is an insulated connection bolt that routes high-current cables through the hull, deck, or bulkhead without chafing and with strain relief. A threaded bolt on both sides ensures a secure connection between the cable sections, while the mounting surface can be sealed or encapsulated, allowing for a watertight installation.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003ePrevents chafing and provides strain relief when routing high-current cables through holes in the hull, deck, and bulkhead\u003c\/li\u003e\n\n\u003cli\u003eLarge mounting surface can be sealed or encapsulated – watertight installation possible (IP66, protected against strong water jets)\u003c\/li\u003e\n\n\u003cli\u003eOne-Piece Serrated Flange Nut ensures a correct and permanently secure connection\u003c\/li\u003e\n\n\u003cli\u003eAvailable in black and red for clear positive\/negative identification in the on-board electrical system\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eThreaded bolt: 3\/8\"-16, on both sides for cable routing\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 250 A DC\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eBolt material: tinned copper alloy\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eProtection class: IP66 (protected against strong water jets)\u003c\/li\u003e\n\n\u003cli\u003eBlack variant: SKU 700122203, 31.65 EUR\u003c\/li\u003e\n\n\u003cli\u003eRed variant: SKU 700122204, 31.65 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhere is the DFB feed-through bolt used?\u003c\/h3\u003e\u003cp\u003eThe DFB is used wherever high-current cables need to pass through a hole in the hull, deck, or bulkhead – for example, between the engine room and the battery bank, or for wiring bow thrusters and anchor winches. The sealed mounting surface keeps the feed-through watertight even under splash water, while the strain relief protects the cable from vibrations and mechanical stress.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"black","offer_id":52832130433361,"sku":"700122203","price":31.65,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":53258890871121,"sku":"700122204","price":31.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102202_3283d2da-9e52-491c-8d66-d8b4f0fbf7e4.png?v=1786391317"},{"product_id":"powerpost-1-4in","title":"PowerPost Collection Point 2001","description":"\u003cp\u003eThe PowerPost 2001 busbar support from Blue Sea Systems is a central connection point for busbar systems, where multiple cables are securely brought together on a common threaded stud.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eThreaded stud: 1\/4\"-20, Ø 6.3 mm, length 19 mm, made of stainless steel\u003c\/li\u003e\n\n\u003cli\u003eSoft PVC protective cap (PowerPost-Insulator) included\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC; current carrying capacity depends on cable and lug\u003c\/li\u003e\n\n\u003cli\u003eMounting: 1\/4\" screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700102001, 23.82 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThis makes the PowerPost 2001 a compact busbar support for the central consolidation of multiple cable lugs in the onboard electrical system, for example on the positive or negative side of a battery bank.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832130498897,"sku":"700102001","price":23.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102001_PowerPost_9ed02be0-d790-42e6-ac18-051d2393a2d8.png?v=1786391318"},{"product_id":"klemmenblock-einzelpotential-20a","title":"Terminal block, single potential 20A","description":"\u003cp\u003eThe Blue Sea Systems (BSS 2402–2410) 20A Single-Pole Terminal Block is a fully isolated series terminal block for separate circuits in the 12\/24V electrical system. Each screw pair forms its own electrically isolated circuit, allowing multiple consumers to be connected cleanly and clearly separated on the same terminal block.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEach screw pair forms an independent, isolated circuit\u003c\/li\u003e\n\n\u003cli\u003eOptional Terminal Block Jumpers (BSS 9218) connect adjacent circuits to a common potential\u003c\/li\u003e\n\n\u003cli\u003eClosed back isolates the busbars from the mounting surface\u003c\/li\u003e\n\n\u003cli\u003eNickel-plated brass busbar for reliable contact, housing made of flame-retardant UL94-V0 thermoplastic\u003c\/li\u003e\n\n\u003cli\u003eRoHS compliant, UL Recognized, CE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 20 A AC\/DC, max. voltage 300 V AC\/DC\u003c\/li\u003e\n\n\u003cli\u003eConnection screw: M3.5 (#6)\u003c\/li\u003e\n\n\u003cli\u003e2 circuits – SKU 700102402, length 36.2 mm, 5.96 EUR\u003c\/li\u003e\n\n\u003cli\u003e4 circuits – SKU 700102404, length 55.0 mm, 6.68 EUR\u003c\/li\u003e\n\n\u003cli\u003e6 circuits – SKU 700102406, length 74.0 mm, 8.43 EUR\u003c\/li\u003e\n\n\u003cli\u003e8 circuits – SKU 700102408, length 93.0 mm, 8.51 EUR\u003c\/li\u003e\n\n\u003cli\u003e10 circuits – SKU 700102410, length 112.0 mm, 11.66 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the 20A terminal block suitable for in the onboard electrical system?\u003c\/h3\u003e\u003cp\u003eThe BS 2402–2410 terminal block is suitable for the separate distribution of smaller consumers such as lighting, instruments, or signal generators, where each output requires its own, cleanly isolated potential. Thanks to the selection of 2- to 10-way variants, the number of terminals can be precisely adapted to the number of consumers in the respective circuit.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"2","offer_id":52832130662737,"sku":"700102402","price":5.96,"currency_code":"EUR","in_stock":true},{"title":"4","offer_id":53259347722577,"sku":"700102404","price":6.68,"currency_code":"EUR","in_stock":true},{"title":"6","offer_id":53259347755345,"sku":"700102406","price":8.43,"currency_code":"EUR","in_stock":true},{"title":"8","offer_id":53259347788113,"sku":"700102408","price":8.51,"currency_code":"EUR","in_stock":true},{"title":"10","offer_id":53259347820881,"sku":"700102410","price":11.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102402_ca9f01bc-61ff-4ef5-bfd8-d85ce1f16cee.png?v=1786391320"},{"product_id":"powerpost-5-16in","title":"PowerPost Collection Point SSP 2002","description":"\u003cp\u003eThe PowerPost SSP 2002 busbar from Blue Sea Systems consolidates multiple cable connections onto a single threaded stud and serves as a compact distribution point in the onboard electrical system.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eThreaded stud: 5\/16\"-18, Ø 7.9 mm, length 7\/8\" (22.2 mm), made of stainless steel\u003c\/li\u003e\n\n\u003cli\u003eSoft PVC protective cap (PowerPost Insulator) included\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC; current carrying capacity depends on cable and lug\u003c\/li\u003e\n\n\u003cli\u003eMounting: 1\/4\" screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122002, 17.97 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe SSP 2002 is suitable for applications with somewhat larger cable lugs where multiple conductors need to be brought together on a common stud.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832130859345,"sku":"700122002","price":17.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102001_PowerPost_a8d94b5f-8af0-4512-9712-ef6181836902.png?v=1786391321"},{"product_id":"klemmenblock-einzelpotential-30a","title":"Terminal block, single potential 30A","description":"\u003cp\u003eThe Blue Sea Systems (BSS 2502–2512) 30A Single Potential Terminal Block is a fully insulated rail terminal block for separate circuits up to 30A in the onboard electrical system. Each pair of screws forms its own insulated circuit – ideal for the clear distribution of multiple consumers to a central terminal strip.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEach pair of screws forms an independent, insulated circuit\u003c\/li\u003e\n\n\u003cli\u003eTerminal Block Jumpers (BSS 9217) connect multiple circuits to a common potential if required\u003c\/li\u003e\n\n\u003cli\u003eClosed back isolates current paths from the mounting surface\u003c\/li\u003e\n\n\u003cli\u003eBus bar made of nickel-plated brass, housing made of flame-retardant UL94-V0 thermoplastic\u003c\/li\u003e\n\n\u003cli\u003eRoHS-compliant, UL Recognized, CE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 30 A AC\/DC, max. voltage 600 V AC\/DC\u003c\/li\u003e\n\n\u003cli\u003eConnection screw: M4 (#8)\u003c\/li\u003e\n\n\u003cli\u003e2-way – SKU 700102502, Length 54.0 mm, 5.47 EUR\u003c\/li\u003e\n\n\u003cli\u003e4-way – SKU 700102504, Length 82.6 mm, 8.71 EUR\u003c\/li\u003e\n\n\u003cli\u003e6-way – SKU 700102506, Length 111.2 mm, 10.00 EUR\u003c\/li\u003e\n\n\u003cli\u003e8-way – SKU 700102508, Length 139.7 mm, 10.89 EUR\u003c\/li\u003e\n\n\u003cli\u003e10-way – SKU 700102510, Length 168.3 mm, 13.15 EUR\u003c\/li\u003e\n\n\u003cli\u003e12-way – SKU 700102512, Length 196.8 mm, 18.90 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the 30A terminal block suitable for in the onboard electrical system?\u003c\/h3\u003e\u003cp\u003eThe BS 2502–2512 terminal block is suitable for medium consumer loads such as pumps, cooling units, or additional consumers, each requiring its own, clearly separated circuit. With variants from 2-way to 12-way, the terminal strip can be precisely adapted to the number of circuits to be connected, without wasting space on the distribution plate.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"2","offer_id":52832131023185,"sku":"700102502","price":5.47,"currency_code":"EUR","in_stock":true},{"title":"4","offer_id":53259347132753,"sku":"700102504","price":8.71,"currency_code":"EUR","in_stock":true},{"title":"6","offer_id":53259347165521,"sku":"700102506","price":10.0,"currency_code":"EUR","in_stock":true},{"title":"8","offer_id":53259347198289,"sku":"700102508","price":10.89,"currency_code":"EUR","in_stock":true},{"title":"10","offer_id":53259347231057,"sku":"700102510","price":13.15,"currency_code":"EUR","in_stock":true},{"title":"12","offer_id":53259347263825,"sku":"700102512","price":18.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102502_93b9fbf4-2e54-4400-a70d-0e509884090a.png?v=1786391426"},{"product_id":"ssp-1","title":"PowerPost collection point 2003","description":"\u003cp\u003eThe Blue Sea Systems PowerPost 2003 collecting post is the most powerful terminal in the 2001 series, bringing multiple cables together on a robust threaded stud.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eThreaded stud: 3\/8\"-16, Ø 9.5 mm, length 7\/8\" (22.2 mm), made of stainless steel\u003c\/li\u003e\n\n\u003cli\u003eSoft PVC protective cap (PowerPost-Insulator) included\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC; current carrying capacity depends on cable and lug\u003c\/li\u003e\n\n\u003cli\u003eMounting: 1\/4\" screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122003, 17.97 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe PowerPost 2003 is particularly suitable for applications with large cable lugs and higher conductor cross-sections, for example as a central positive or negative point at the main distribution board.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832131219793,"sku":"700122003","price":17.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102001_PowerPost_9d60d14d-d0af-4f8a-8119-4ea4411a7829.png?v=1786391429"},{"product_id":"powerpost-mini-10-32","title":"Collection point PowerPost Mini 2010","description":"\u003cp\u003eThe PowerPost Mini 2010 busbar by Blue Sea Systems is the most compact version of the PowerPost series and is suitable for smaller cable cross-sections in the onboard electrical system.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eThreaded studs: #10-32, Ø 6.3 mm, length 5\/8\" (15.9 mm), made of stainless steel\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC; current carrying capacity depends on cable and lug\u003c\/li\u003e\n\n\u003cli\u003eMounting: #8 screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700102010, 11.96 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe PowerPost Mini 2010 is suitable for consumers with smaller cable cross-sections where a space-saving collection point is sufficient.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832131383633,"sku":"700102010","price":11.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102010_PowerPost_93f97dd2-8ed9-4ade-a55b-c477925ffd60.png?v=1786391431"},{"product_id":"klemmenblock-einzelpotential-65a","title":"Terminal block, single potential 65A","description":"\u003cp\u003eThe Blue Sea Systems (BSS 2602–2610) 65A Single Pole Terminal Block is the most powerful version of the BSS terminal block series, designed for higher currents up to 65A. Here, too, each pair of screws forms its own, fully isolated circuit.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEach pair of screws forms an independent, isolated circuit\u003c\/li\u003e\n\n\u003cli\u003eTerminal Block Jumpers (BSS 9216) connect multiple circuits to a common potential if required\u003c\/li\u003e\n\n\u003cli\u003eClosed back isolates current paths from the mounting surface\u003c\/li\u003e\n\n\u003cli\u003eNickel-plated brass busbar, housing made of flame-retardant UL94-V0 thermoplastic\u003c\/li\u003e\n\n\u003cli\u003eRoHS compliant, UL Recognized, CE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 65 A AC\/DC, max. voltage 600 V AC\/DC\u003c\/li\u003e\n\n\u003cli\u003eConnection screw: M5 (#10)\u003c\/li\u003e\n\n\u003cli\u003e2 circuits – SKU 700102602, length 63.8 mm, 9.76 EUR\u003c\/li\u003e\n\n\u003cli\u003e4 circuits – SKU 700102604, length 98.7 mm, 13.74 EUR\u003c\/li\u003e\n\n\u003cli\u003e6 circuits – SKU 700102606, length 133.6 mm, 22.25 EUR\u003c\/li\u003e\n\n\u003cli\u003e8 circuits – SKU 700102608, length 168.5 mm, 25.53 EUR\u003c\/li\u003e\n\n\u003cli\u003e10 circuits – SKU 700102610, length 203.4 mm, 29.57 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the 65A terminal block suitable for in the onboard electrical system?\u003c\/h3\u003e\u003cp\u003eThe BS 2602–2610 terminal block is used when higher-power consumers such as anchor winches, bow thrusters, or auxiliary batteries require their own, clearly separated circuits with higher current carrying capacity. The variants from 2 to 10 poles cover common requirements in 12\/24V onboard electrical systems, from single outlets to extensive distribution bars.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"2","offer_id":52832131416401,"sku":"700102602","price":9.76,"currency_code":"EUR","in_stock":true},{"title":"4","offer_id":53259346968913,"sku":"700102604","price":13.74,"currency_code":"EUR","in_stock":true},{"title":"6","offer_id":53259347001681,"sku":"700102606","price":22.25,"currency_code":"EUR","in_stock":true},{"title":"8","offer_id":53259347034449,"sku":"700102608","price":25.53,"currency_code":"EUR","in_stock":true},{"title":"10","offer_id":53259347067217,"sku":"700102610","price":29.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102402_f7200d26-cde3-40a9-9654-852f96a2d2b1.png?v=1786391434"},{"product_id":"powerpost-mini-1-4in","title":"Collection Point Mini Power Post SSP 2011","description":"\u003cp\u003eThe Blue Sea Systems Mini PowerPost SSP 2011 is a compact version with a slightly larger threaded stud than the 2010 and serves as a small, central distribution point in the on-board electrical system.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eThreaded stud: 1\/4\"-20, Ø 6.3 mm, length 3\/4\" (19.1 mm), made of stainless steel\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC; current rating dependent on cable and lug\u003c\/li\u003e\n\n\u003cli\u003eMounting: #8 screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122011, 13.99 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe Mini PowerPost SSP 2011 is suitable as a space-saving collection point for small to medium consumer circuits when a full-fledged 2001 socket is not required.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832131744081,"sku":"700122011","price":13.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102010_PowerPost_75c1d7ab-191b-4ab2-95ad-e120d7bdebc7.png?v=1786391434"},{"product_id":"sammelschiene-5fach","title":"DualBus busbar 2701","description":"\u003cp\u003eThe DualBus 2701 busbar combines a positive and a negative busbar on a common plastic block and serves to clearly consolidate onboard power lines on both polarities. The matching cover 2709 is optionally available as a separate variant and provides additional contact protection.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCombines positive and negative busbar on one block, saving space compared to two individual busbars\u003c\/li\u003e\n\n\u003cli\u003eOne-piece serrated flange nuts ensure correct, secure connections\u003c\/li\u003e\n\n\u003cli\u003eTinned copper material for high conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOptionally available cover 2709 adds contact protection to the busbar if required\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eBusbar Variant 2701: SKU 700102701, 5 consumer connections per busbar (#8-32 screws), without cover\u003c\/li\u003e\n\n\u003cli\u003eCover Variant 2709: SKU 700102709, matching protective cover for busbar 2701\u003c\/li\u003e\n\n\u003cli\u003eContinuous current rating: 100 A AC \/ 100 A DC\u003c\/li\u003e\n\n\u003cli\u003eMaximum operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting holes for #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000, CE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the DualBus 2701 busbar suitable for?\u003c\/h3\u003e\u003cp\u003eThe DualBus 2701 is suitable for smaller onboard power system sections where up to 5 consumers are to be centrally consolidated on both the positive and negative sides, for example, at a compact fuse panel or in a control cabinet with limited space.\u003c\/p\u003e\u003cp\u003eChoose busbar 2701 for pure distribution functionality and, if installed in an easily accessible location, add cover 2709 to ensure standard-compliant contact protection.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"rail","offer_id":52832131776849,"sku":"700102701","price":22.73,"currency_code":"EUR","in_stock":true},{"title":"cover","offer_id":53259346903377,"sku":"700102709","price":24.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102701_DualBus_77c50dee-5dd3-4066-840e-a9d31b2a9d70.png?v=1786391437"},{"product_id":"powerpost-doppel-2-x-5-16in-bolzen-mit-abdeckungen","title":"Collection point PowerPost SSP 2016","description":"\u003cp\u003eThe PowerPost SSP 2016 busbar from Blue Sea Systems is a dual busbar with two threaded studs, designed to extend cable runs or to consolidate multiple conductors at two separate connection points.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e2 x 5\/16\"-18 threaded studs, stud height 1.50\" (38.1 mm) each\u003c\/li\u003e\n\n\u003cli\u003eInsulating protective cap included\u003c\/li\u003e\n\n\u003cli\u003eCurrent rating: not separately rated - dependent on cable and lug, as current flows between stacked connections\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122016, 29.10 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe SSP 2016 is suitable for extending cable runs or connecting additional consumers at a central point in the onboard electrical system, for example, when expanding existing wiring.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832131940689,"sku":"700122016","price":29.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102016_PowerPost_d1619ec6-3dfb-426b-ba13-989c10a230ad.png?v=1786391438"},{"product_id":"sammelschiene-10-fach","title":"DualBus busbar 2702","description":"\u003cp\u003eThe DualBus 2702 busbar combines a positive and a negative busbar, each with 10 consumer connections, on a common plastic block and is suitable for more extensive distribution tasks in the electrical system. The matching cover 2710 is optionally available as a separate variant.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCombines positive and negative busbars, each with 10 connections on one block\u003c\/li\u003e\n\n\u003cli\u003eOne-piece serrated flange nuts ensure correct, secure connections\u003c\/li\u003e\n\n\u003cli\u003eTinned copper material for high conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOptionally available cover 2710 adds touch protection to the rail if required\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eVariant Busbar 2702: SKU 700102702, 10 consumer connections per busbar (#8-32 screws), without cover\u003c\/li\u003e\n\n\u003cli\u003eVariant Cover 2710: SKU 700102710, matching protective cover for busbar 2702\u003c\/li\u003e\n\n\u003cli\u003eContinuous current rating: 100 A AC \/ 100 A DC\u003c\/li\u003e\n\n\u003cli\u003eMaximum operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting holes for #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000, CE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the DualBus 2702 busbar suitable for?\u003c\/h3\u003e\u003cp\u003eThe DualBus 2702 is suitable for larger electrical system distributors where up to 10 consumers per polarity need to be centrally combined, for example on extensive fuse panels or main distribution points with many individual circuits.\u003c\/p\u003e\u003cp\u003eFor installations that are freely accessible, the matching cover 2710 should also be ordered to ensure safe touch protection for the connections.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"rail","offer_id":52832132006225,"sku":"700102702","price":29.45,"currency_code":"EUR","in_stock":true},{"title":"cover","offer_id":53259346411857,"sku":"700102710","price":27.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102702_d57c7566-381a-4ea5-aba8-c088e4e505bd.png?v=1786391439"},{"product_id":"ssp-2","title":"Collection Point Dual PowerPost 2017","description":"\u003cp\u003eThe Blue Sea Systems Dual PowerPost 2017 bus bar is a two-pole bus bar with two robust threaded studs for central DC power distribution in the onboard electrical system.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003e2 × 3\/8\"-16 threaded studs, stud height 1.63\" (41.3 mm) each\u003c\/li\u003e\n\n\u003cli\u003eInsulating protective cap included\u003c\/li\u003e\n\n\u003cli\u003eCurrent rating: not rated separately - dependent on cable and lug, as current flows between stacked connections\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122017, 29.10 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe Dual PowerPost 2017 is suitable for central distribution of higher currents via two robust connection points, for example to expand main lines in the onboard electrical system.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832132235601,"sku":"700122017","price":29.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102016_PowerPost_3c8df64f-ccc9-4519-877f-98921ae5e45b.png?v=1786391442"},{"product_id":"abdeckkappen-doppeleingang","title":"Double entrance cover caps","description":"\u003cp\u003eBlue Sea Systems dual entry insulating caps protect dual entry PowerPosts from accidental short circuits.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eProtects dual entry PowerPosts from accidental short circuits\u003c\/li\u003e\n\n\u003cli\u003eFor use with Dual PowerPost cable connectors\u003c\/li\u003e\n\n\u003cli\u003eWire size up to 2\/0 AWG\u003c\/li\u003e\n\n\u003cli\u003eCable entry: 17.8 mm\u003c\/li\u003e\n\n\u003cli\u003eBS4002: Black\u003c\/li\u003e\n\n\u003cli\u003eBS4003: Red\u003c\/li\u003e\n\n\u003cli\u003eIncluded with SSP2\u003c\/li\u003e\n\n\u003cli\u003eSKU 700104002 (black) \/ SKU 700104003 (red)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe insulating caps are used wherever dual entry PowerPosts need additional short-circuit protection.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"black","offer_id":52832132301137,"sku":"700104002","price":18.09,"currency_code":"EUR","in_stock":true},{"title":"red","offer_id":53258888216913,"sku":"700104003","price":18.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700104002_Abdeckkappen_4f3026f2-6bb2-42ba-8293-60844511c5f3.png?v=1786391443"},{"product_id":"powerpost-doppel1x5-16instd1x3-8in-std-mit-abdeckungen","title":"PowerPost Collection Point 2018","description":"\u003cp\u003eThe PowerPost 2018 collecting post from Blue Sea Systems is a dual collecting post with two different strength threaded studs, specifically designed for connecting outboard motors.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eThreaded studs: 1 x 5\/16\"-18 (stud height 1.50\" \/ 38.1 mm) and 1 x 3\/8\"-16 (stud height 1.63\" \/ 41.3 mm)\u003c\/li\u003e\n\n\u003cli\u003eInsulating protective cap included\u003c\/li\u003e\n\n\u003cli\u003eCurrent rating: not separately rated – dependent on cable and cable lug, as current flows between stacked terminals\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws; CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eAlso suitable for extending factory-assembled outboard engine wiring harnesses\u003c\/li\u003e\n\n\u003cli\u003eSKU 700102018, 29.10 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe PowerPost 2018 is especially suitable for connecting outboard motors when factory-supplied engine cables need to be extended, and generally for connecting conductors of different strengths at a common point.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832132497745,"sku":"700102018","price":29.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102018_PowerPost.png?v=1792761746"},{"product_id":"ba-5-ba-7","title":"Battery pole cover BA 5 \/ BA 7","description":"\u003cp\u003eBlue Sea Systems BA 5 and BA 7 battery terminal covers reliably insulate battery terminals with adapter connections (BKM and BK6) against short circuits.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eBA 5 (BS4005): for cable cross-sections 25-50 mm²\u003c\/li\u003e\n\n\u003cli\u003eBA 7 (BS4006): for cable cross-sections 50-70 mm²\u003c\/li\u003e\n\n\u003cli\u003eFor battery terminals with adapter connections (compatible with BKM and BK6)\u003c\/li\u003e\n\n\u003cli\u003eColor: Red\/Black\u003c\/li\u003e\n\n\u003cli\u003eSupplied in pairs\u003c\/li\u003e\n\n\u003cli\u003eSKU 700124005 (BA5) \/ SKU 700124006 (BA7)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe covers are suitable for use on battery terminals with attached adapter connections in the electrical systems of vehicles and boats.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"25-50mm²","offer_id":52832132628817,"sku":"700124005","price":8.8,"currency_code":"EUR","in_stock":true},{"title":"50-70mm²","offer_id":53258882220369,"sku":"700124006","price":8.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700124005_BA5_23882794-4345-4458-b85d-4c69991e1bc7.png?v=1786391448"},{"product_id":"sammelschiene-mit-2fach-bolzen-3-8-in-mit-kappen","title":"Busbar PowerBar SSP 2019","description":"\u003cp\u003eThe PowerBar SSP 2019 (Blue Sea Systems BS 2019) is a dual busbar made of tinned copper with two 3\/8\"-16 threaded studs and an insulated cover. It serves as a secure distribution or collection point for direct current in the onboard electrical system.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTinned copper (C11000) for high conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eEquipped with insulators\/cover – increased touch protection compared to the version without a cover (PowerBar 2020)\u003c\/li\u003e\n\n\u003cli\u003eCompact design with two connection studs\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: up to 200 A\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e2 threaded studs 3\/8\"-16 (9.5 mm)\u003c\/li\u003e\n\n\u003cli\u003eWith insulators\/cover\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122019\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar SSP 2019 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar SSP 2019 is suitable wherever an insulated dual busbar is needed for positive or negative lines, for example, directly at batteries or as a protected distribution point in control cabinets. The integrated cover reduces the risk of short circuits due to accidental contact with bare conductors or tools.\u003c\/p\u003e\u003cp\u003eFor a safe, touch-protected busbar in a 48 V onboard electrical system, the PowerBar SSP 2019 is the right addition.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832132825425,"sku":"700122019","price":30.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102019_PowerBar_d11842f7-c910-4fd8-b12c-2eb5aec0ae5d.png?v=1786391450"},{"product_id":"ba-1-ba-2-ba-3","title":"Cover caps BA 1 \/ BA 2 \/ BA 3","description":"\u003cp\u003eThe BA 1, BA 2, and BA 3 terminal insulating boots from Blue Sea Systems insulate individual terminal studs on alternators, starters, windlasses, and other high-current connection points in vehicle and boat electrical systems.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eBA 1 (BS4010 red \/ BS4011 black): for cable cross-sections 10-25 mm²\u003c\/li\u003e\n\n\u003cli\u003eBA 2 (BS4012 red \/ BS4013 black): for cable cross-sections 35-70 mm²\u003c\/li\u003e\n\n\u003cli\u003eBA 3 (BS4014 red \/ BS4015 black): for cable cross-sections 95-120 mm²\u003c\/li\u003e\n\n\u003cli\u003eInsulates individual terminal studs on alternators, starters, windlasses, and other high-current connection points\u003c\/li\u003e\n\n\u003cli\u003eSKU 700124010 \/ 700124011 \/ 700124012 \/ 700124013 \/ 700124014 \/ 700124015\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThese insulating boots are used where individual bare terminal studs on high-current components need to be safely insulated.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"red \/ 10 - 25mm²","offer_id":52832132923729,"sku":"700124010","price":4.86,"currency_code":"EUR","in_stock":true},{"title":"black \/ 10 - 25mm²","offer_id":53258880254289,"sku":"700124011","price":4.86,"currency_code":"EUR","in_stock":true},{"title":"red \/ 35 - 70mm²","offer_id":53259345264977,"sku":"700124012","price":6.9,"currency_code":"EUR","in_stock":true},{"title":"black \/ 35 - 70mm²","offer_id":53259345297745,"sku":"700124013","price":7.26,"currency_code":"EUR","in_stock":true},{"title":"red \/ 95 - 120mm²","offer_id":53259345330513,"sku":"700124014","price":6.57,"currency_code":"EUR","in_stock":true},{"title":"black \/ 95 - 120mm²","offer_id":53259345363281,"sku":"700124015","price":6.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700104010_BA1-2-3_10e0d526-bc80-4a01-9822-2bcda8b05ee3.png?v=1786391451"},{"product_id":"sammelschiene-mit-2fach-bolzen-3-8in","title":"Busbar PowerBar 2020","description":"\u003cp\u003eThe PowerBar 2020 (Blue Sea Systems BS 2020) is a compact, tinned copper busbar with two 3\/8\"-16 threaded studs, serving as a distribution or collection point for DC power in on-board electrical systems. It is suitable for directly consolidating cables at batteries, switches, or distribution panels.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTinned copper (C11000) for high conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eCompact design with only two connection studs for space-saving installation\u003c\/li\u003e\n\n\u003cli\u003eNo insulating cover – flexibly integrable into existing switchgear\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: up to 200 A\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e2 threaded studs 3\/8\"-16 (9.5 mm)\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000\u003c\/li\u003e\n\n\u003cli\u003eVersion without insulators\/cover\u003c\/li\u003e\n\n\u003cli\u003eSKU 700102020\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar 2020 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar 2020 is suitable as a simple, robust collection point for positive or negative cables, for instance directly at the battery connection or as a distributor between fuse holders and consumers. Those who additionally require touch protection can opt for the PowerBar SSP 2019 variant with an insulating cover.\u003c\/p\u003e\u003cp\u003eFor a solid, compact distribution point in a 48V on-board electrical system, the PowerBar 2020 is the right choice.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832132890961,"sku":"700102020","price":22.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102020_PowerBar_57a22dca-55b2-4f3d-9b53-5b588c7ccbbd.png?v=1786391454"},{"product_id":"powerpost-plus-1-4in","title":"Collection point PowerPost Plus 2101","description":"\u003cp\u003eThe PowerPost Plus 2101 collection point from Blue Sea Systems combines a central main stud with eight additional screw terminals, allowing many smaller conductors to be connected to a single high-current point.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eMain stud: 1\/4\"-20, 1\" long, stainless steel\u003c\/li\u003e\n\n\u003cli\u003e8 additional #8-32 screw terminals on tinned copper washer\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 150 A DC; max. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting: 1\/4\" screws; busbar made of tinned copper\u003c\/li\u003e\n\n\u003cli\u003eInsulating protective cap (PowerPost-Insulator) included\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700102101, 40.16 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe PowerPost Plus 2101 is suitable where many smaller consumer lines need to converge at a central high-current point, without the need for a separate busbar for each line.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832133316945,"sku":"700102101","price":40.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102101_PowerPost_4792ee54-74fe-4b47-b421-480c88b4cad4.png?v=1786391479"},{"product_id":"abdeckung-batterieklemme","title":"Battery terminal cover","description":"\u003cp\u003eThe battery terminal cover from Blue Sea Systems reliably insulates standard automotive battery terminals against short circuits.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eInsulates standard automotive battery terminals\u003c\/li\u003e\n\n\u003cli\u003eBS4016: for cable cross-sections 25-50 mm²\u003c\/li\u003e\n\n\u003cli\u003eBS4017: for cable cross-sections 50-70 mm²\u003c\/li\u003e\n\n\u003cli\u003eColor: Red\/Black\u003c\/li\u003e\n\n\u003cli\u003eSupplied in pairs\u003c\/li\u003e\n\n\u003cli\u003eSKU 700104016 (25-50mm²) \/ SKU 700104017 (50-70mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe cover is suitable for all vehicles and boats with classic automotive standard battery terminals.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"25-50mm²","offer_id":52832133349713,"sku":"700104016","price":6.94,"currency_code":"EUR","in_stock":true},{"title":"50-70mm²","offer_id":53259344707921,"sku":"700104017","price":8.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700104016_Bat.-Klemme_3235c3d8-f88c-440a-9acf-cebc76b65998.png?v=1786391481"},{"product_id":"powerpost-plus-5-16in","title":"PowerPost Plus Collection Base SSP 2102","description":"\u003cp\u003eThe PowerPost Plus SSP 2102 bus bar from Blue Sea Systems features a more robust main stud than the 2101 and also eight additional screw terminals for smaller conductors.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eMain stud: 5\/16\"-18, 3\/4\" length, stainless steel\u003c\/li\u003e\n\n\u003cli\u003e8 additional #8-32 screw terminals on tinned copper washer\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 150 A DC; max. operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting: 1\/4\" screws; bus bar made of tinned copper\u003c\/li\u003e\n\n\u003cli\u003eInsulating protective cap (PowerPost-Insulator) included\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122102, 38.38 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe PowerPost Plus SSP 2102 is suitable for installations with slightly higher current loads on the main stud, where several smaller loads are also to be connected directly to the same bus bar.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832133710161,"sku":"700122102","price":38.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102101_PowerPost_1633458c-7cb3-480f-9643-88e878b22b36.png?v=1786391484"},{"product_id":"asm-6-asm-12","title":"Fuse Distributor with Additional Negative Terminals ASM 6 \/ ASM 12","description":"\u003ch3\u003eASM 6 \/ ASM 12 Fuse Distribution Panels with Additional Negative Connections\u003c\/h3\u003e\n\u003cp\u003eThe ASM 6 (BS 5025) and ASM 12 (BS 5026) fuse distribution panels are ST-blade fuse holders with a common input potential, featuring an additional negative busbar in addition to the positive busbar. This allows both the positive and negative leads of multiple loads to be connected to a single, clearly arranged distribution panel.\u003c\/p\u003e\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e6 (ASM 6) or 12 (ASM 12) circuits with common input potential\u003c\/li\u003e\n\n\u003cli\u003eAdditional negative busbar (10-32 stud) for neat return wiring\u003c\/li\u003e\n\n\u003cli\u003eClear, insulating cover with label fields, meets ABYC\/USCG touch protection requirements\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stainless steel flange nuts for secure, corrosion-resistant connections\u003c\/li\u003e\n\n\u003cli\u003ePush-button latch for quick access to fuses\u003c\/li\u003e\n\n\u003cli\u003eIncludes 20 labelable circuit labels\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eASM 6: SKU 700105025 (BS 5025), 6 circuits, with cover, positive and negative busbar each 10-32 stud\u003c\/li\u003e\n\n\u003cli\u003eASM 12: SKU 700105026 (BS 5026), 12 circuits, with cover, positive and negative busbar each 10-32 stud\u003c\/li\u003e\n\n\u003cli\u003eMax. System Voltage: 32V DC\u003c\/li\u003e\n\n\u003cli\u003eMax. Current: 30A per circuit \/ 100A per block\u003c\/li\u003e\n\n\u003cli\u003eFuse Type: ATO or ATC blade fuses\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eASM 6 or ASM 12 – which variant suits the onboard electrical system?\u003c\/h3\u003e\n\u003cp\u003eThe ASM 6 is suitable for smaller distributions with up to six loads, while the ASM 12 is for more extensive installations with up to twelve circuits. Both variants are useful when a common negative busbar for the return conductors is required in addition to positive fusing, for example, in instrument panels or central distribution points.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"6","offer_id":52832134136145,"sku":"700105025","price":63.07,"currency_code":"EUR","in_stock":true},{"title":"12","offer_id":53259344249169,"sku":"700105026","price":78.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700105025_ASM6OD_ab5c3506-bac5-4f53-9360-dd88ec7269d9.png?v=1786391487"},{"product_id":"ssp-1-8","title":"Collection point PowerPost Plus 2103","description":"\u003cp\u003eThe PowerPost Plus 2103 busbar from Blue Sea Systems is the most powerful version of the Plus series, featuring a robust 3\/8\" main stud and eight additional terminals for smaller loads.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eMain stud: 3\/8\"-16, 3\/4\" length, stainless steel\u003c\/li\u003e\n\n\u003cli\u003e8 additional #8-32 screw terminals on tinned copper washer\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 150 A DC; max operating voltage: 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting: 1\/4\" screws; busbar made of tinned copper\u003c\/li\u003e\n\n\u003cli\u003eInsulating protective cap (PowerPost-Insulator) included\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122103, 33.97 EUR\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eThe PowerPost Plus 2103 is suitable for the central connection of multiple loads in the on-board electrical system when a high cable cross-section also needs to be connected to the main stud.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832134201681,"sku":"700122103","price":33.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700122103_SSP18_be8ecc78-8de2-405f-bc2e-47882d17a5d5.png?v=1786391488"},{"product_id":"sicherungshalter-fuer-6-stromkreise","title":"Fuse holder for 6 circuits","description":"\u003ch3\u003eFuse Holder for 6 Circuits (BS 5035 \/ BS 5037)\u003c\/h3\u003e\n\u003cp\u003eThe BS 5035 (with cover) and BS 5037 (without cover) fuse holder is an independent ST-blade fuse holder with six circuits. Unlike common-source distribution blocks, each of the six circuits has its own separate input and output – this allows both continuously monitored (24-hour) and switched circuits to be housed in a single block.\u003c\/p\u003e\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e6 circuits, each with its own independent input and output\u003c\/li\u003e\n\n\u003cli\u003eCombination of 24-hour circuits and switched circuits possible in the same block\u003c\/li\u003e\n\n\u003cli\u003eTwo terminal block jumpers included for connecting multiple circuits\u003c\/li\u003e\n\n\u003cli\u003eClear, insulating cover with label fields and storage space for a spare fuse (BS 5035)\u003c\/li\u003e\n\n\u003cli\u003ePush-button latch for quick access to the fuses\u003c\/li\u003e\n\n\u003cli\u003eIncludes 20 labelable circuit labels\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSKU 700125035 (BS 5035), 6 circuits, with cover\u003c\/li\u003e\n\n\u003cli\u003eMax. system voltage: 32V DC\u003c\/li\u003e\n\n\u003cli\u003eMax. current: 30A per circuit \/ 40A per connected circuit group\u003c\/li\u003e\n\n\u003cli\u003eFuse type: ATO or ATC blade fuses\u003c\/li\u003e\n\n\u003cli\u003eAccessories: 2 additional terminal block jumpers available as a two-pack (Part No. 9217)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is the fuse holder with separate inputs and outputs suitable for?\u003c\/h3\u003e\n\u003cp\u003eThis design is always suitable when a mix of 24-hour consumers such as bilge pumps or alarm systems and switched consumers such as navigation electronics or radios is required in an onboard electrical system – both groups can be flexibly configured in the same block here.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"with cover","offer_id":52832134562129,"sku":"700125035","price":62.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700105035_Sicherungshalter6_9975be35-a01d-4696-a518-0e6b2d52a8b5.png?v=1786391489"},{"product_id":"powerbar-4x-bolzen-3-8-16","title":"Busbar PowerBar SMS 2104","description":"\u003cp\u003eThe PowerBar SMS 2104 busbar (Blue Sea Systems BS 2104) is part of the PowerBar series for 600 A busbars. It is made of solid tinned copper and serves as a heavy-duty distribution or collection point for direct current in onboard electrical systems with high power requirements.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSolid tinned copper (C11000) for maximum conductivity\u003c\/li\u003e\n\n\u003cli\u003e4 threaded studs 3\/8\"-16 for connecting multiple main lines\u003c\/li\u003e\n\n\u003cli\u003e4 additional screw terminals #8-32 for smaller conductor cross-sections\u003c\/li\u003e\n\n\u003cli\u003eCompatible with the optional insulating cover BS 2708\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 545 A AC \/ 600 A DC\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e4 threaded studs 3\/8\"-16\u003c\/li\u003e\n\n\u003cli\u003e4 screw terminals #8-32\u003c\/li\u003e\n\n\u003cli\u003eLength: 177.8 mm (7.0\"), Hole spacing: 158.74 mm (6.25\")\u003c\/li\u003e\n\n\u003cli\u003eMaterial: Tinned copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eOptional cover: BS 2708\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122104\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar SMS 2104 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar SMS 2104 is suitable for onboard electrical systems with multiple main loads or charging sources that are brought together at a common 600 A collection point – for example, at battery banks, inverters, or main distribution panels. The additional smaller screw terminals also allow the connection of thinner control or auxiliary lines to the same busbar.\u003c\/p\u003e\u003cp\u003eFor high-performance onboard electrical systems, the PowerBar SMS 2104 is a reliable central collection point.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832134627665,"sku":"700122104","price":146.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700122104_3d23a40c-057f-46f5-aded-544b33a1748a.png?v=1786391491"},{"product_id":"sicherungskasten-type-clb-unabhaengige-stromkreise","title":"6-way fuse holder for circuit breakers up to 100A Type CLB","description":"\u003ch3\u003e6-Way Fuse Holder for Circuit Breakers up to 100A Type CLB (BS 5050 \/ BS 5051)\u003c\/h3\u003e\n\u003cp\u003eThe BS 5050 (6 circuits) and BS 5051 (12 circuits) are ST-CLB fuse holders in an independent design for plug-in, thermal circuit breakers of the CLB series without their own switching function. Quick-connect clips allow the circuit breakers to be easily inserted, while hardened contact springs ensure a permanently secure connection.\u003c\/p\u003e\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eNon-bridged, independent circuits – each circuit with its own input\u003c\/li\u003e\n\n\u003cli\u003eQuick-connect clips allow CLB circuit breakers to snap in easily\u003c\/li\u003e\n\n\u003cli\u003eHardened contact springs for reliable, long-lasting contact\u003c\/li\u003e\n\n\u003cli\u003eClear, insulating cover with square labeling fields (ABYC\/USCG compliant)\u003c\/li\u003e\n\n\u003cli\u003eCable exit possible in two directions, connection via ring terminals\u003c\/li\u003e\n\n\u003cli\u003eOptional jumper 5049 available for connecting multiple positions (compatible with BS 5050\/5051)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSKU 700105050 (BS 5050), 6 positions, independent input potential\u003c\/li\u003e\n\n\u003cli\u003eSKU 700105051 (BS 5051), 12 positions, independent input potential\u003c\/li\u003e\n\n\u003cli\u003eMax. System Voltage: 32V DC\u003c\/li\u003e\n\n\u003cli\u003eMax. Current: 32A per circuit \/ 40A per interconnected group\u003c\/li\u003e\n\n\u003cli\u003eCompatible with Push Button Reset-Only CLB Circuit Breakers (Series 1659 or equivalent successor types)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eWhen is the independent CLB fuse holder variant the right choice?\u003c\/h3\u003e\n\u003cp\u003eThe BS 5050\/5051 is the right choice if several circuits need to be protected independently with resettable circuit breakers instead of fuses, and each circuit has its own supply line.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"6","offer_id":52832134857041,"sku":"700105050","price":63.31,"currency_code":"EUR","in_stock":true},{"title":"12","offer_id":53259344019793,"sku":"700105051","price":103.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700105050_CLB_6c1a3d95-16a9-4f89-a3cc-a086ea2b9597.png?v=1786391492"},{"product_id":"maxibus-12-x-10-24","title":"MaxiBus Busbar SMS 2105","description":"\u003cp\u003eThe MaxiBus SMS 2105 busbar is a heavy-duty busbar made of tinned copper that can be used as either a positive or negative distribution point in the on-board electrical system. Insert-molded stainless steel studs allow for high torque for a permanently secure electrical connection.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eInsert-molded stainless steel studs eliminate the need for additional locking nuts and allow for high torque\u003c\/li\u003e\n\n\u003cli\u003eOne-piece flange nuts ensure correct, permanently secure connections\u003c\/li\u003e\n\n\u003cli\u003eTinned copper material for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOptionally upgradeable with insulating full cover 2718 (sold separately) to ABYC insulation level\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current rating: 250 A AC \/ 250 A DC\u003c\/li\u003e\n\n\u003cli\u003eMaximum operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e2 connection studs 5\/16\"-18\u003c\/li\u003e\n\n\u003cli\u003e12 consumer connections #10-24\u003c\/li\u003e\n\n\u003cli\u003eLength: 7.75\" (197 mm), hole spacing: 7.125\" (181 mm)\u003c\/li\u003e\n\n\u003cli\u003eMounting hardware: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000, CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eMatching cover: Part number 2718 (for SMS 2105 and SMS 2126)\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122105 (Blue Sea Systems part number 2105)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the MaxiBus SMS 2105 busbar suitable for?\u003c\/h3\u003e\u003cp\u003eThe SMS 2105 is designed for heavily loaded on-board electrical system sections where many individual consumer lines (up to 12) need to be combined on a central positive or negative pole – for example, at main distributors, inverters or battery banks with high current requirements.\u003c\/p\u003e\u003cp\u003eDue to its high continuous current rating of 250 A, the MaxiBus SMS 2105 is particularly suitable for systems with high power density where conventional busbars with lower current ratings are not sufficient.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832134955345,"sku":"700122105","price":74.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700122105_8afcddd7-41ec-4cfb-bd50-b21a3ac62a4d.png?v=1786391493"},{"product_id":"sicherungskasten-type-clb-minusanschluessen","title":"Multiple Fuse Distribution Block for Circuit Breakers up to 100A Type CLB","description":"\u003ch3\u003eMultiple Fuse Distribution Panel for Circuit Breakers up to 100A Type CLB (BS 5052 \/ BS 5054)\u003c\/h3\u003e\n\u003cp\u003eThe BS 5052 (6 circuits) or BS 5054 (12 circuits) is an ST-CLB fuse distribution panel with a common input potential for pluggable, thermal circuit breakers of the CLB series. In contrast to the independent versions BS 5050\/5051, this distribution panel also features its own negative busbar and supplies all circuits from a common feeder cable.\u003c\/p\u003e\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCommon input potential for all circuits from one feeder cable\u003c\/li\u003e\n\n\u003cli\u003eIntegrated negative busbar (10-32 stud) for clean return conductor wiring\u003c\/li\u003e\n\n\u003cli\u003eQuick-connect clips allow CLB circuit breakers to snap in easily\u003c\/li\u003e\n\n\u003cli\u003eClear, insulating cover with square labeling fields (ABYC\/USCG compliant)\u003c\/li\u003e\n\n\u003cli\u003eCable exit possible in two directions, connection via ring terminals\u003c\/li\u003e\n\n\u003cli\u003eOptional jumper 5049 available for flexible wiring\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSKU 700105052 (BS 5052), 6 positions, common input potential, negative busbar 10-32 stud\u003c\/li\u003e\n\n\u003cli\u003eSKU 700105054 (BS 5054), 12 positions, common input potential, negative busbar 10-32 stud\u003c\/li\u003e\n\n\u003cli\u003eMax. System Voltage: 32V DC\u003c\/li\u003e\n\n\u003cli\u003eMax. Current: 32A per circuit \/ 100A per block (Common Source)\u003c\/li\u003e\n\n\u003cli\u003eCompatible with Push Button Reset-Only CLB circuit breakers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eWhen is the multiple fuse distribution panel with common input suitable?\u003c\/h3\u003e\n\u003cp\u003eThe BS 5052\/5054 is suitable when multiple consumers are supplied from the same battery or feeder cable and a common negative busbar is desired for neat return conductor wiring – for example, in central distribution panels.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"6","offer_id":52832135151953,"sku":"700105052","price":80.56,"currency_code":"EUR","in_stock":true},{"title":"12","offer_id":53259343954257,"sku":"700105054","price":138.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700105052_CLB6_e0277dba-cb22-4fb4-9445-3de84843ab59.png?v=1786391497"},{"product_id":"powerbar-8-x-bolzen-3-8-16","title":"Busbar PowerBar SMS 2107","description":"\u003cp\u003eThe PowerBar SMS 2107 busbar (Blue Sea Systems BS 2107) is the longer version of the PowerBar 600 A series made of solid, tin-plated copper. With eight threaded studs, it offers significantly more connection options for complex onboard electrical systems with many main consumers.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSolid, tin-plated copper (C11000) for maximum conductivity\u003c\/li\u003e\n\n\u003cli\u003e8 threaded 3\/8\"-16 studs for numerous main connections on one busbar\u003c\/li\u003e\n\n\u003cli\u003e4 additional #8-32 screw terminals for smaller conductor cross-sections\u003c\/li\u003e\n\n\u003cli\u003eOne-piece, serrated flange nuts for secure, low-resistance contact\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 545 A AC \/ 600 A DC\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e8 threaded 3\/8\"-16 studs\u003c\/li\u003e\n\n\u003cli\u003e4 screw terminals #8-32\u003c\/li\u003e\n\n\u003cli\u003eLength: 288.93 mm (11.375\"), hole spacing: 263.53 mm (10.375\")\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tin-plated copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122107\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the PowerBar SMS 2107 suitable for?\u003c\/h3\u003e\u003cp\u003eThe PowerBar SMS 2107 is suitable for large onboard electrical systems with many main lines, for example in yachts, motorhomes or commercial vehicles with multiple battery banks, inverters and chargers that need to be brought together at a common high-current collection point.\u003c\/p\u003e\u003cp\u003eIf eight main connections are required on a 600 A busbar, the PowerBar SMS 2107 is the right choice.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832135217489,"sku":"700122107","price":208.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102107_PowerBar.png?v=1792761745"},{"product_id":"maxibus-6-x-5-16-bolzen","title":"Busbar MaxiBus SMS 2126","description":"\u003cp\u003eThe MaxiBus SMS 2126 busbar is a heavy-duty busbar made of tinned copper for power distribution in onboard electrical systems and can be used as either a positive or negative terminal. It features six robust terminal studs for large cable cross-sections.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eInsert-molded stainless steel studs allow for high torque without additional lock nuts\u003c\/li\u003e\n\n\u003cli\u003eOne-piece serrated flange nuts ensure correct, permanently secure connections\u003c\/li\u003e\n\n\u003cli\u003eTinned copper material for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOptionally upgradeable with insulating full cover 2718 (sold separately) to ABYC insulation level\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current rating: 250 A AC \/ 250 A DC\u003c\/li\u003e\n\n\u003cli\u003eMaximum operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e6 terminal studs 5\/16\"-18\u003c\/li\u003e\n\n\u003cli\u003eLength: 7.75\" (197 mm), mounting hole spacing: 7.125\" (181 mm)\u003c\/li\u003e\n\n\u003cli\u003eMounting hardware: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000, CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSuitable cover: Part number 2718 (for SMS 2105 and SMS 2126)\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122126 (Blue Sea Systems Part Number 2126)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the MaxiBus SMS 2126 busbar suitable for?\u003c\/h3\u003e\u003cp\u003eThe SMS 2126 is suitable for onboard electrical systems where multiple large, high-cross-section cables need to be directly connected to multiple studs, for example, for parallel wiring of multiple batteries, inverters, or generators with high current demands.\u003c\/p\u003e\u003cp\u003eWith six terminal studs, the SMS 2126 offers more direct stud connections than the SMS 2105, making it particularly suitable for applications where many large cables converge instead of numerous small consumer cables.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832135512401,"sku":"700122126","price":80.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102126_MaxiBus.png?v=1792761745"},{"product_id":"einbau-schaltsicherungsautomat-25a-200a-2","title":"Built-in Miniature Circuit Breaker MRCB 25A-200A","description":"\u003ch3\u003ePanel Mount Circuit Breaker MRCB 25A-200A\u003c\/h3\u003e\u003cp\u003eThe MRCB is a panel mount circuit breaker from Blue Sea Systems' 187 series for protecting large DC loads such as electric winches or electric motors. Thanks to its self-tapping housing, no additional mounting plate or bezel is required, and its high breaking capacity also makes it suitable as a main fuse for larger battery banks.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSelf-tapping housing – no mounting frame or bezel required\u003c\/li\u003e\n\u003cli\u003eHighly visible, yellow reset lever clearly indicates tripped condition\u003c\/li\u003e\n\u003cli\u003eTrip-free design: cannot be held in the ON position after tripping\u003c\/li\u003e\n\u003cli\u003eLarge clearance around terminal studs for cable lugs up to 1\/0 AWG\u003c\/li\u003e\n\u003cli\u003eRobust 5\/16\"-18 terminal studs for high tightening torques and secure connections\u003c\/li\u003e\n\u003cli\u003e5,000A interrupt capacity at 14V DC for large battery banks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e25A: SKU 700127035\u003c\/li\u003e\n\u003cli\u003e30A: SKU 700127036\u003c\/li\u003e\n\u003cli\u003e40A: SKU 700127038\u003c\/li\u003e\n\u003cli\u003e50A: SKU 700127039\u003c\/li\u003e\n\u003cli\u003e60A: SKU 700127040\u003c\/li\u003e\n\u003cli\u003e70A: SKU 700127041\u003c\/li\u003e\n\u003cli\u003e80A: SKU 700127042\u003c\/li\u003e\n\u003cli\u003e90A: SKU 700127043\u003c\/li\u003e\n\u003cli\u003e100A: SKU 700127044\u003c\/li\u003e\n\u003cli\u003e120A: SKU 700127046\u003c\/li\u003e\n\u003cli\u003e135A: SKU 700127047\u003c\/li\u003e\n\u003cli\u003e150A: SKU 700127048\u003c\/li\u003e\n\u003cli\u003e200A: SKU 700127049\u003c\/li\u003e\n\u003cli\u003eMax. System Voltage: 48V DC\u003c\/li\u003e\n\u003cli\u003eProtection Class: IP66 – protected against strong water jets\u003c\/li\u003e\n\u003cli\u003eTerminal Studs: 5\/16\"-18 (M8)\u003c\/li\u003e\n\u003cli\u003eInterrupt Capacity: 5,000A at 14V DC \/ 3,000A at 28V DC \/ 1,500A at 48V DC\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40°C to 85°C\u003c\/li\u003e\n\u003cli\u003eType: Thermal, Switchable\/Manual Reset, Trip-Free\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich amperage variant is suitable for which consumer?\u003c\/h3\u003e\u003cp\u003eThe lower amperage levels (25A-60A) are suitable for medium consumers such as bow thrusters or smaller electric motors, the medium levels (70A-120A) for anchor winches and larger drives, while the upper levels (135A-200A) are designed as a main fuse for the entire battery bank in larger onboard electrical systems.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"25A","offer_id":52832135577937,"sku":"700127035","price":110.46,"currency_code":"EUR","in_stock":true},{"title":"30A","offer_id":53258903421265,"sku":"700127036","price":110.46,"currency_code":"EUR","in_stock":true},{"title":"40A","offer_id":53258903454033,"sku":"700127038","price":110.46,"currency_code":"EUR","in_stock":true},{"title":"50A","offer_id":53259343462737,"sku":"700127039","price":116.41,"currency_code":"EUR","in_stock":true},{"title":"60A","offer_id":53259343495505,"sku":"700127040","price":116.41,"currency_code":"EUR","in_stock":true},{"title":"70A","offer_id":53259343528273,"sku":"700127041","price":116.41,"currency_code":"EUR","in_stock":true},{"title":"80A","offer_id":53259343561041,"sku":"700127042","price":116.41,"currency_code":"EUR","in_stock":true},{"title":"90A","offer_id":53259343593809,"sku":"700127043","price":132.79,"currency_code":"EUR","in_stock":true},{"title":"100A","offer_id":53259343626577,"sku":"700127044","price":116.41,"currency_code":"EUR","in_stock":true},{"title":"120A","offer_id":53259343659345,"sku":"700127046","price":116.41,"currency_code":"EUR","in_stock":true},{"title":"135A","offer_id":53259343692113,"sku":"700127047","price":113.55,"currency_code":"EUR","in_stock":true},{"title":"150A","offer_id":53259343724881,"sku":"700127048","price":132.79,"currency_code":"EUR","in_stock":true},{"title":"200 A","offer_id":53259343757649,"sku":"700127049","price":174.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700107035_MRCB_e9abb43e-89c3-4f26-94fe-4ce6e6cfb44e.png?v=1786391500"},{"product_id":"maxibus-4-x-5-16-bolzen","title":"MaxiBus Busbar SMS 2127","description":"\u003cp\u003eThe MaxiBus SMS 2127 busbar is a heavy-duty, more compact busbar made of tinned copper for power distribution in the on-board electrical system and can be used as either a positive or negative pole. It offers four robust connection studs with more compact dimensions than the SMS 2105\/2126.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eInsert-molded stainless steel studs allow high tightening torque without additional locking nuts\u003c\/li\u003e\n\n\u003cli\u003eOne-piece serrated flange nuts ensure correct, permanently secure connections\u003c\/li\u003e\n\n\u003cli\u003eMaterial tinned copper for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eMore compact design compared to SMS 2105\/2126, optionally retrofittable with insulating cover 2719\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current rating: 250 A AC \/ 250 A DC\u003c\/li\u003e\n\n\u003cli\u003eMaximum operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e4 connection studs 5\/16\"-18\u003c\/li\u003e\n\n\u003cli\u003eLength: 5.875\" (149 mm), Hole spacing: 5.25\" (133 mm)\u003c\/li\u003e\n\n\u003cli\u003eMounting hardware: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000, CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eSuitable cover: Part number 2719 (for SMS 2127 and SMS 2128)\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122127 (Blue Sea Systems part number 2127)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the MaxiBus SMS 2127 busbar suitable for?\u003c\/h3\u003e\u003cp\u003eThe SMS 2127 is suitable for on-board electrical system sections where high current carrying capacity is required in a more compact space, for example, at main distributors in smaller boats or vehicles with limited installation space.\u003c\/p\u003e\u003cp\u003eWith four 5\/16\"-18 connection studs, it offers sufficient connection options for several large cables with significantly smaller dimensions than the SMS 2105 and SMS 2126 variants.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832136200529,"sku":"700122127","price":52.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102127_24819f03-7e44-4f3b-8639-aa3550089f38.png?v=1786391502"},{"product_id":"einbau-sicherungsautomat-fuer-panelmontage-25a-150a","title":"Panel-mount circuit breaker TCP for panel mounting 25A-150A","description":"\u003ch3\u003eTCP Panel Mount Circuit Breaker 25A-150A\u003c\/h3\u003e\n\u003cp\u003eThe TCP is a panel mount circuit breaker from Blue Sea Systems' 285 series, offering thermal overcurrent protection for circuits from 25A to 150A. It is a direct replacement for the older 185 series and, thanks to its high breaking capacity, is also suitable as a main fuse for medium-sized battery banks.\u003c\/p\u003e\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eHighly visible yellow reset lever clearly indicates tripped condition\u003c\/li\u003e\n\n\u003cli\u003eTrip-Free design: cannot be held in the ON position after tripping\u003c\/li\u003e\n\n\u003cli\u003eDirect replacement (drop-in replacement) for the 185 series\u003c\/li\u003e\n\n\u003cli\u003e3,000A interrupt capacity at 48V DC – sufficient for medium battery banks\u003c\/li\u003e\n\n\u003cli\u003eM6 terminal studs, suitable for 1\/4\" ring terminals\u003c\/li\u003e\n\n\u003cli\u003eIP67 protection – protected against temporary submersion up to 1m for 30 minutes\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e25A: SKU 700127080\u003c\/li\u003e\n\n\u003cli\u003e30A: SKU 700127081\u003c\/li\u003e\n\n\u003cli\u003e40A: SKU 700127082\u003c\/li\u003e\n\n\u003cli\u003e50A: SKU 700127083\u003c\/li\u003e\n\n\u003cli\u003e60A: SKU 700127084\u003c\/li\u003e\n\n\u003cli\u003e70A: SKU 700127085\u003c\/li\u003e\n\n\u003cli\u003e80A: SKU 700127086\u003c\/li\u003e\n\n\u003cli\u003e100A: SKU 700127087\u003c\/li\u003e\n\n\u003cli\u003e120A: SKU 700127088\u003c\/li\u003e\n\n\u003cli\u003e150A: SKU 700127089\u003c\/li\u003e\n\n\u003cli\u003eMax. System Voltage: 48V DC\u003c\/li\u003e\n\n\u003cli\u003eTerminal Studs: M6\u003c\/li\u003e\n\n\u003cli\u003eInterrupt Capacity: 3,000A at 48V DC\u003c\/li\u003e\n\n\u003cli\u003eOperating Temperature: -40°C to 85°C\u003c\/li\u003e\n\n\u003cli\u003eType: Thermal, Trip-Free Reset, tripped via test trip button\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eWhich Amperage Variant Suits Which Consumer?\u003c\/h3\u003e\n\u003cp\u003eSmaller sizes (25A-60A) are suitable for individual large consumers such as auxiliary heaters or smaller motors, medium sizes (70A-100A) for anchor winches or bow thrusters, while the larger sizes (120A-150A) are designed as main fuses for the battery bank of a medium-sized onboard electrical system.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"25A","offer_id":52832136298833,"sku":"700127080","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"30A","offer_id":53259343036753,"sku":"700127081","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"40A","offer_id":53259343069521,"sku":"700127082","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"50A","offer_id":53259343102289,"sku":"700127083","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"60A","offer_id":53259343135057,"sku":"700127084","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"70A","offer_id":53258899358033,"sku":"700127085","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"80A","offer_id":53259343167825,"sku":"700127086","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"100A","offer_id":53259343200593,"sku":"700127087","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"120A","offer_id":53259343233361,"sku":"700127088","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"150A","offer_id":53259343266129,"sku":"700127089","price":72.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700107080_TCP_176e9787-281e-4b9b-8d33-e15ac001cc46.png?v=1786391504"},{"product_id":"maxibus-6-x-10-24-bolzen","title":"MaxiBus Busbar SMS 2128","description":"\u003cp\u003eThe MaxiBus SMS 2128 (Blue Sea Systems BS 2128) busbar is part of the 250A MaxiBus busbar series and serves as a central distribution or collection point for direct current in the on-board electrical system of boats, RVs, or commercial vehicles. It is made of tinned copper and can be used as either a positive or negative busbar to connect multiple consumers or return lines at a common point.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTinned copper (C11000) for maximum conductivity and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eMolded-in stainless steel studs – no loose lock nuts needed\u003c\/li\u003e\n\n\u003cli\u003eOne-piece, serrated flange nuts for correct, secure contact without contact resistance\u003c\/li\u003e\n\n\u003cli\u003eOptional upgrade with fully enclosed insulating base and cover (accessory 2719)\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 250 A AC \/ 250 A DC\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e2 threaded studs 5\/16\"-18\u003c\/li\u003e\n\n\u003cli\u003e6 screw terminals #10-24\u003c\/li\u003e\n\n\u003cli\u003eLength: 149 mm (5.875\"), hole spacing: 133 mm (5.25\")\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122128\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the MaxiBus SMS 2128 suitable for?\u003c\/h3\u003e\u003cp\u003eThe MaxiBus SMS 2128 is suitable for on-board electrical systems with high power requirements where multiple consumers or charging sources need to be connected at a common positive or negative point, such as inverters, charge controllers, or battery isolation systems. Its compact design with only two threaded studs also allows it to be placed in tighter control cabinets.\u003c\/p\u003e\u003cp\u003eWith the MaxiBus SMS 2128, you can create a neatly organized, high-capacity distribution point for your 250A on-board electrical system.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832136724817,"sku":"700122128","price":48.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102128_MaxiBus_d53712eb-22ae-45c1-a5d1-4cecc08d15d1.png?v=1786391505"},{"product_id":"tcb","title":"High-current circuit breaker TCB","description":"\u003cp\u003eThe \u003cstrong\u003eTCB\u003c\/strong\u003e is a high-current circuit breaker (285-Series Thermal Circuit Breaker) with thermal tripping and manual operation for surface mounting in vehicles with 48V DC electrical systems. It reliably protects circuits from overload and can be manually reset after tripping.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTrip-free design: The breaker cannot be artificially held in the closed position after tripping\u003c\/li\u003e\n\n\u003cli\u003eDirect replacement for 185-Series circuit breakers\u003c\/li\u003e\n\n\u003cli\u003e3,000 A Interrupting Capacity (AIC) at 48 V DC – suitable for medium-sized battery banks\u003c\/li\u003e\n\n\u003cli\u003eIP67 degree of protection and ignition protected according to SAE J1171 – suitable for use in the engine compartment\u003c\/li\u003e\n\n\u003cli\u003eWide operating temperature range from –40 °C to +85 °C\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eMaximum operating voltage 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eThermal tripping, trip-free class with manual reset\u003c\/li\u003e\n\n\u003cli\u003eM6 connection bolts (for 1\/4\" ring terminal), maximum tightening torque 50 in-lb (7.9 Nm)\u003c\/li\u003e\n\n\u003cli\u003eAvailable for 30 A, 40 A, 50 A, 60 A, 70 A, 80 A, 100 A and 120 A\u003c\/li\u003e\n\n\u003cli\u003eNot suitable for protecting starter motors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhen is a high-current circuit breaker like the TCB the right choice?\u003c\/h3\u003e\u003cp\u003eWhenever circuits in 48V electrical systems need to be reliably protected against overload and a resettable breaker instead of a one-time fuse is desired – for example, as a replacement for older 185-Series circuit breakers in existing systems.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"30A","offer_id":52832136823121,"sku":"700127181","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"40A","offer_id":53258900799825,"sku":"700127182","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"50A","offer_id":53258900832593,"sku":"700127183","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"60A","offer_id":53403300888913,"sku":"700127184","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"70A","offer_id":53258900865361,"sku":"700127185","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"80A","offer_id":53403283063121,"sku":"700127186","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"100A","offer_id":53258900898129,"sku":"700127187","price":72.41,"currency_code":"EUR","in_stock":true},{"title":"120A","offer_id":53258900930897,"sku":"700127188","price":72.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700127187_TCB_752c78ac-2c43-4335-aa81-84711983478c.png?v=1786391507"},{"product_id":"rcs","title":"RCS control switch","description":"\u003cp\u003eThe \u003cstrong\u003eRCS control switch\u003c\/strong\u003e (Blue Sea Systems Remote Control Contura Switch) is a key switch with 0–1 positions and integrated LED feedback for remote control of ML-Series main switches and relays. It allows convenient switching on and off of a power relay mounted remotely from the helm station.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eLED feedback shows the switching status of the controlled relay directly on the switch\u003c\/li\u003e\n\n\u003cli\u003eLocking slider reduces the risk of accidental switching\u003c\/li\u003e\n\n\u003cli\u003eResistant to vibration, shock, temperature shock, moisture and salt spray\u003c\/li\u003e\n\n\u003cli\u003eCompact design for mounting in the switch panel\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitching capacity max. 20 A at 12 V DC or 15 A at 24 V DC\u003c\/li\u003e\n\n\u003cli\u003eOperating current (self-consumption) approx. 18 mA\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature –40 °C to +85 °C\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP67, ignition protected according to ISO 8846\u003c\/li\u003e\n\n\u003cli\u003eLED with a lifespan of approximately 100,000 hours (half-life)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the RCS control switch used for?\u003c\/h3\u003e\u003cp\u003eWhenever a remotely installed main switch relay needs to be conveniently operated from the helm station, without having to lay long main power cables to the control panel. The LED feedback always shows whether the circuit is open or closed.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832137150801,"sku":"700102155","price":41.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102155_RCS_3d618eda-2ae2-45e5-96e0-0ce022d547b3.png?v=1786391509"},{"product_id":"fbr-500","title":"Main switch relay FBR 500","description":"\u003cp\u003eThe \u003cstrong\u003eFBR 500\u003c\/strong\u003e is a bistable main switch relay (Remote Battery Switch) for on-board installation in boats and vehicles. It switches circuits with up to 500 A remotely via a light control line – the thick, expensive battery cables no longer need to be routed to the switch panel, but only to the relay near the battery. Thanks to magnetic latching technology, the FBR 500 remains completely de-energized in both the open and closed states and therefore consumes no power from the on-board battery.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eBistable (magnetically latching) circuit – no power consumption at rest, neither open nor closed\u003c\/li\u003e\n\n\u003cli\u003eRemote controlled disconnection and connection of circuits via a separate control cable with small cross-section\u003c\/li\u003e\n\n\u003cli\u003eSilver alloy contacts for reliable switching even under load\u003c\/li\u003e\n\n\u003cli\u003eShorter, thinner main cables thanks to mounting close to the battery – less voltage drop, weight and cost compared to a classic battery main switch with long cable runs\u003c\/li\u003e\n\n\u003cli\u003eLED feedback of switching status (optional LED or included remote control switch required)\u003c\/li\u003e\n\n\u003cli\u003eRobust, corrosion-resistant 3\/8\"-16 copper studs and one-piece stainless steel flange nuts for secure connections\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContact voltage 0–64 V DC, suitable for 12V, 24V, 36V and 48V on-board power systems\u003c\/li\u003e\n\n\u003cli\u003eControl signal: 12 V momentary (DC12V variant) or 24 V momentary (DC24V variant)\u003c\/li\u003e\n\n\u003cli\u003eCranking current (30 sec.) up to 1450 A, continuous current up to 500 A depending on cable cross-section (2× 4\/0 AWG)\u003c\/li\u003e\n\n\u003cli\u003eConnection studs 3\/8\"-16 (M10), maximum tightening torque 140 in-lb (15.8 Nm)\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP66 (protected against strong water jets), ignition protected according to ISO 8846 and SAE J1171\u003c\/li\u003e\n\n\u003cli\u003eIncluded in delivery: Remote control switch (Contura) for control\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhy is a main switch relay like the FBR 500 needed?\u003c\/h3\u003e\u003cp\u003eWhenever batteries or entire circuits need to be safely disconnected remotely without having to lay long and heavy main power cables to the switch panel – for example, when separating starter and house batteries, for service cases, or to reduce fire risks from live long cables. The FBR 500 replaces the classic mechanical main switch with a remotely controllable relay directly at the battery, thereby minimizing cable length, weight, and voltage drop in the on-board electrical system.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"DC12V","offer_id":52832137412945,"sku":"700107700","price":295.0,"currency_code":"EUR","in_stock":true},{"title":"DC24V","offer_id":53258909352273,"sku":"700107702","price":295.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700107702_FBR_66e30b64-1e18-4d28-a87b-b775afd30eef.png?v=1786391531"},{"product_id":"sammelschiene-4-x-10-32-bolzen","title":"Busbar 2305 without cover","description":"\u003cp\u003eThe SMS 2305 busbar (Blue Sea Systems MiniBus 2305) is a compact 100A busbar made of tinned copper for central power distribution in the onboard electrical system, designed for applications with limited space. It is supplied without a cover.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eCompact format for installations with limited space\u003c\/li\u003e\n\n\u003cli\u003eOne-piece serrated flange nuts ensure correct, secure connections\u003c\/li\u003e\n\n\u003cli\u003eTinned copper material for high conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eSuitable for the ST-Blade Waterproof Fuse Block and can be retrofitted with cover 2713\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current rating: 100 A AC \/ 100 A DC\u003c\/li\u003e\n\n\u003cli\u003eMaximum operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e4 threaded studs Ø 4.8 mm (#10-32), no screw terminals\u003c\/li\u003e\n\n\u003cli\u003eMounting holes for #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000, CE and UKCA certified\u003c\/li\u003e\n\n\u003cli\u003eWithout cover (cover optionally available as accessory part number 2713)\u003c\/li\u003e\n\n\u003cli\u003eSKU 700122305 (Blue Sea Systems part number 2305)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the 2305 busbar suitable for?\u003c\/h3\u003e\u003cp\u003eThe SMS 2305 is suitable as a pure connection rail for positive or negative lines wherever multiple threaded stud connections are required, for example, as a central collection point for ring terminals on batteries, chargers, or fuse panels.\u003c\/p\u003e\u003cp\u003eSince it is supplied without a cover, installation in already enclosed housings or control cabinets is recommended; for freely accessible installation positions, the appropriate protective cover should also be ordered.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832137642321,"sku":"700122305","price":19.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102305_Sammelschiene.png?v=1792761746"},{"product_id":"sicherungsblockbruecke","title":"Safety block bridge","description":"\u003cp\u003eThe fuse block jumper (Blue Sea Systems Terminal Block Jumper, BS 9216\/9217\/9218) connects multiple screw terminals of a Blue Sea terminal block or ST-Blade fuse holder to a common circuit, replacing individual connecting wires between the terminals.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eMaterial: Nickel-Plated Brass\u003c\/li\u003e\n\n\u003cli\u003eContinuous current rating corresponds to the respective terminal block\u003c\/li\u003e\n\n\u003cli\u003eBS 9218: for 20 A terminal blocks (series 2402–2410), SKU 700109218\u003c\/li\u003e\n\n\u003cli\u003eBS 9217: for 30 A terminal blocks (series 2502–2512) and for ST-Blade fuse holders 5035 and 5037, SKU 700109217\u003c\/li\u003e\n\n\u003cli\u003eBS 9216: for 65 A terminal blocks (series 2602–2610), SKU 700109216\u003c\/li\u003e\n\n\u003cli\u003eSales unit: Pack of 5\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003eWith the appropriate fuse block jumper, multiple screw terminals of a terminal block or fuse holder can be connected to a common circuit without separate jumper wires.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"20A","offer_id":52832137675089,"sku":"700109218","price":5.89,"currency_code":"EUR","in_stock":true},{"title":"30A","offer_id":53259342250321,"sku":"700109217","price":5.89,"currency_code":"EUR","in_stock":true},{"title":"65A","offer_id":53259342283089,"sku":"700109216","price":5.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700109218_SBB_d4d03f3a-3074-4b17-9602-218d6df65429.png?v=1786391536"},{"product_id":"sammelschiene-4-x-1-mit-abdeckung","title":"Busbar SMS 2303","description":"\u003cp\u003eThe SMS 2303 busbar (Blue Sea Systems BS 2303\/2307) is a tinned copper busbar with four threaded studs for power distribution in the onboard electrical system. Unlike the SMS 12\/22, it does not have additional screw terminals and is therefore designed purely for connecting ring terminals to the threaded studs.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTinned copper (C11000) for high conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003e4 threaded studs 1\/4\"-20 for direct connection of ring terminals\u003c\/li\u003e\n\n\u003cli\u003eMolded-in stainless steel studs for high torque and secure contact\u003c\/li\u003e\n\n\u003cli\u003eOptionally available with or without snap-on insulating cover\u003c\/li\u003e\n\n\u003cli\u003eCE and UKCA certified\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContinuous current: 130 A AC \/ 150 A DC\u003c\/li\u003e\n\n\u003cli\u003eMax. operating voltage: 300 V AC \/ 48 V DC\u003c\/li\u003e\n\n\u003cli\u003e4 threaded studs 1\/4\"-20\u003c\/li\u003e\n\n\u003cli\u003eMaterial: tinned copper C11000\u003c\/li\u003e\n\n\u003cli\u003eMounting: #10 (M5) screws\u003c\/li\u003e\n\n\u003cli\u003eWithout cover: SKU 700122303\u003c\/li\u003e\n\n\u003cli\u003eWith cover (BS 2307): SKU 700122307\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the SMS 2303 suitable for?\u003c\/h3\u003e\u003cp\u003eThe SMS 2303 is suitable as a compact collection point for cables with ring terminals, for example, for combining several battery cables or return conductors, without the need for additional screw terminals. For installation in easily accessible locations, the version with a cover (BS 2307) is recommended.\u003c\/p\u003e\u003cp\u003eFor four direct stud connections at a common collection point, the SMS 2303 is a space-saving solution.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"without cover","offer_id":53403564081489,"sku":"700122303","price":29.87,"currency_code":"EUR","in_stock":true},{"title":"with cover","offer_id":53403564114257,"sku":"700122307","price":35.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102307_SMS_0a32c14d-80b3-41a3-83c9-6654bdd43e74.png?v=1786391539"},{"product_id":"class-t-sicherungen","title":"Class T fuses","description":"\u003ch3\u003eClass-T Fuses for High Current Applications\u003c\/h3\u003e\n\u003cp\u003eClass-T fuses are high-performance melting fuses for protecting onboard electrical systems with large battery banks, lithium-ion and TPPL batteries, and inverters. With a breaking capacity of 20,000 A at 125 V DC, they are among the most powerful fuses for onboard installations in marine and off-road applications, reliably protecting cables and consumers from overload, even with very high short-circuit currents.\u003c\/p\u003e\n\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtremely fast response in case of short circuit due to high breaking capacity\u003c\/li\u003e\n\n\u003cli\u003eBreaking capacity of 20,000 A at 125 V DC – suitable for large battery banks, lithium-ion and TPPL batteries\u003c\/li\u003e\n\n\u003cli\u003eRecommended by most inverter manufacturers\u003c\/li\u003e\n\n\u003cli\u003eUL listed according to Standard 248-15\u003c\/li\u003e\n\n\u003cli\u003eWide amperage selection from 110 A to 600 A for different power classes in the onboard electrical system\u003c\/li\u003e\n\n\u003cli\u003eCompatible with appropriate Class-T fuse holders for safe, standard-compliant onboard installation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBreaking capacity: 20,000 A at 125 V DC\u003c\/li\u003e\n\n\u003cli\u003eMaximum operating voltage: 125 V DC\u003c\/li\u003e\n\n\u003cli\u003eApproval: UL 248-15\u003c\/li\u003e\n\n\u003cli\u003e110 A – SKU 700125112 – suitable for fuse holder 5007100\u003c\/li\u003e\n\n\u003cli\u003e125 A – SKU 700125113 – suitable for fuse holder 5007100\u003c\/li\u003e\n\n\u003cli\u003e150 A – SKU 700125114 – suitable for fuse holder 5007100\u003c\/li\u003e\n\n\u003cli\u003e175 A – SKU 700125115 – suitable for fuse holder 5007100\u003c\/li\u003e\n\n\u003cli\u003e200 A – SKU 700125116 – suitable for fuse holder 5007100\u003c\/li\u003e\n\n\u003cli\u003e225 A – SKU 700125117 – suitable for fuse holder 5502100\u003c\/li\u003e\n\n\u003cli\u003e250 A – SKU 700125118 – suitable for fuse holder 5502100\u003c\/li\u003e\n\n\u003cli\u003e300 A – SKU 700125119 – suitable for fuse holder 5502100\u003c\/li\u003e\n\n\u003cli\u003e350 A – SKU 700125120 – suitable for fuse holder 5502100\u003c\/li\u003e\n\n\u003cli\u003e400 A – SKU 700125121 – suitable for fuse holder 5502100\u003c\/li\u003e\n\n\u003cli\u003e450 A – SKU 777124500 – suitable for fuse holder 778-T2S-600B\u003c\/li\u003e\n\n\u003cli\u003e500 A – SKU 777125000 – suitable for fuse holder 778-T2S-600B\u003c\/li\u003e\n\n\u003cli\u003e600 A – SKU 777126000 – suitable for fuse holder 778-T2S-600B\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich Class-T fuse fits which fuse holder?\u003c\/h3\u003e\n\u003cp\u003eFor amperage levels from 110 A to 200 A, the 5007100 fuse holder (M6 connecting bolt, up to 160 A operating current) is used. For levels from 225 A to 400 A, the 5502100 fuse holder is intended, which is designed for up to 320 A operating current and is ignition-protected according to ISO 8846\/SAE J1171, provided the cover is correctly closed. The high-current variants from 450 A to 600 A belong in the 778-T2S-600B fuse holder. This allows selecting the appropriate combination of fuse and holder for every application – from inverters to protecting the main battery circuit.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"110A","offer_id":52832138035537,"sku":"700125112","price":58.7,"currency_code":"EUR","in_stock":true},{"title":"125A","offer_id":53258896408913,"sku":"700125113","price":58.7,"currency_code":"EUR","in_stock":true},{"title":"150A","offer_id":53258896441681,"sku":"700125114","price":58.7,"currency_code":"EUR","in_stock":true},{"title":"175A","offer_id":53258896474449,"sku":"700125115","price":58.7,"currency_code":"EUR","in_stock":true},{"title":"200 A","offer_id":53258896507217,"sku":"700125116","price":58.7,"currency_code":"EUR","in_stock":true},{"title":"225A","offer_id":53259341988177,"sku":"700125117","price":81.8,"currency_code":"EUR","in_stock":true},{"title":"250A","offer_id":53258896539985,"sku":"700125118","price":64.9,"currency_code":"EUR","in_stock":true},{"title":"300A","offer_id":53259342020945,"sku":"700125119","price":78.81,"currency_code":"EUR","in_stock":true},{"title":"350A","offer_id":53259342053713,"sku":"700125120","price":94.08,"currency_code":"EUR","in_stock":true},{"title":"400A","offer_id":53259342086481,"sku":"700125121","price":67.98,"currency_code":"EUR","in_stock":true},{"title":"450A","offer_id":53432714461521,"sku":"777124500","price":112.63,"currency_code":"EUR","in_stock":true},{"title":"500A","offer_id":53432714494289,"sku":"777125000","price":123.05,"currency_code":"EUR","in_stock":true},{"title":"600A","offer_id":53432714527057,"sku":"777126000","price":144.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700125112_ClassT_001328ba-d3ae-49af-a9a7-16955f6c337f.png?v=1786391540"}],"url":"https:\/\/www.philippi-online.de\/en\/collections\/bordinstallation.oembed?page=9","provider":"philippi elektrische systeme GmbH","version":"1.0","type":"link"}