{"title":"Battery master switch","description":"\u003ch2\u003eBattery main switches for boats, yachts and vehicles\u003c\/h2\u003e\n\u003cp\u003eThe battery main switch isolates the battery system from the on-board network. It prevents deep discharge during lay-up, makes maintenance safe and allows quick emergency shutdown. philippi offers rotary and selector switches, flange switches for high currents and remote-controlled switches for 12, 24 and, depending on the model, 48 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn short:\u003c\/strong\u003e the main switch switches, the main fuse protects. Both belong together; the fuse sits no more than 17.8 cm from the positive terminal (ABYC E-11).\u003c\/p\u003e\n\u003ch3\u003eThe types\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eBHM and BHS rotary switches:\u003c\/strong\u003e round, for surface, flush or panel mounting. BHM size 300 A continuous (900 A for 30 s), BHS size 350 A (1,200 A for 30 s), also double-pole.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBWS selector switches:\u003c\/strong\u003e switch between two batteries or connect them.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBH-F flange switches:\u003c\/strong\u003e for high currents from 200 A rated current, IP 67, also double-pole.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRemote-controlled FHR, FBR and XD series switches:\u003c\/strong\u003e operated via push button, P-BUS or NMEA 2000; they can sit right at the battery while the control point is freely chosen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Blue Sea switch ratings apply to 120 mm² cable and are continuous ratings in the on state, not switching ratings. All data at a glance: \u003ca href=\"\/en\/pages\/bluesea\"\u003eBlue Sea battery main switches\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eChoosing the right switch\u003c\/h3\u003e\n\u003cdiv class=\"ak-table\"\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eRequirement\u003c\/th\u003e\u003cth\u003eSwitch\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eOne battery, up to 300 A continuous\u003c\/td\u003e\u003ctd\u003eBHM rotary switch\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eOne battery, up to 350 A continuous\u003c\/td\u003e\u003ctd\u003eBHS rotary switch\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eTwo batteries selectable\u003c\/td\u003e\u003ctd\u003eBWS selector switch\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eHigh currents, damp location\u003c\/td\u003e\u003ctd\u003eBH-F flange switch (IP 67)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eControl from the helm or via P-BUS\u003c\/td\u003e\u003ctd\u003eremote-controlled FHR or XD\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I also need a main fuse?\u003c\/strong\u003e Yes. The switch isolates but does not protect against short circuits. The main fuse sits no more than 17.8 cm from the positive terminal; with lithium batteries only as an SHB bolt-down fuse or Class T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMay I switch under load?\u003c\/strong\u003e That depends on the switch. The current ratings of the rotary switches are continuous ratings in the on state, not switching ratings. Switch off large consumers before switching over.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich current rating do I need?\u003c\/strong\u003e The continuous rating of the switch must exceed the highest current in the main cable, i.e. what all consumers draw together. Inrush currents of winches and starters are covered by the short-time rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre there remote-controlled main switches?\u003c\/strong\u003e Yes, the FHR, FBR and XD series switches are operated electrically, for example via push button, the P-BUS system or NMEA 2000.\u003c\/p\u003e","products":[{"product_id":"bs-11003","title":"BS 11003","description":"\u003cp\u003eThe BS 11003 from Blue Sea Systems is a three-position heavy-duty battery master switch (Selector 3 Position) for ignition-protected installation on gasoline boats. It selectively connects isolated battery banks to consumers and features integrated Alternator Field Disconnect.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eIgnition protected for safe installation on gasoline boats\u003c\/li\u003e\n\n\u003cli\u003eIntegrated Alternator Field Disconnect (AFD) protects the alternator diodes\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stainless steel flange nuts for secure, durable connections\u003c\/li\u003e\n\n\u003cli\u003eTactile detent indicator shows switch position even without visual contact\u003c\/li\u003e\n\n\u003cli\u003eFits common Perko and Guest hole patterns (low amperage), surface or rear panel mounting possible\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch Type: Selector, 3 Positions\u003c\/li\u003e\n\n\u003cli\u003eCranking Current (30 sec.): 1600 A\u003c\/li\u003e\n\n\u003cli\u003eShort-Time Current (5 min.): 700 A\u003c\/li\u003e\n\n\u003cli\u003eContinuous Current: 500 A\u003c\/li\u003e\n\n\u003cli\u003eMaximum Operating Voltage: 32V DC\u003c\/li\u003e\n\n\u003cli\u003eConnection studs for 1\/2\" ring terminals (M12), suitable for up to 4\/0 AWG (approx. 120 mm²) battery cables\u003c\/li\u003e\n\n\u003cli\u003eApproval: CE, ISO 8846, UL 1107, complies with ABYC requirements, UL 1500 and SAE J1171 (Ignition Protection)\u003c\/li\u003e\n\n\u003cli\u003eProtection Class: IP66 – protected against powerful water jets\u003c\/li\u003e\n\n\u003cli\u003eOptional Accessories: Icon label set 7902 (sold separately)\u003c\/li\u003e\n\n\u003cli\u003eSKU 700111003\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the BS 11003 battery master switch suitable for?\u003c\/h3\u003e\u003cp\u003eThe BS 11003 is used on gasoline boats with multiple battery banks when engine and house batteries need to be selectively connected to onboard consumers, either individually or together, and an ignition-protected installation near the engine compartment is required.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832128532817,"sku":"700111003","price":153.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700111003.png?v=1780995917"},{"product_id":"rcs","title":"RCS control switch","description":"\u003cp\u003eThe \u003cstrong\u003eRCS control switch\u003c\/strong\u003e (Blue Sea Systems Remote Control Contura Switch) is a key switch with 0–1 positions and integrated LED feedback for remote control of ML-Series main switches and relays. It allows convenient switching on and off of a power relay mounted remotely from the helm station.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eLED feedback shows the switching status of the controlled relay directly on the switch\u003c\/li\u003e\n\n\u003cli\u003eLocking slider reduces the risk of accidental switching\u003c\/li\u003e\n\n\u003cli\u003eResistant to vibration, shock, temperature shock, moisture and salt spray\u003c\/li\u003e\n\n\u003cli\u003eCompact design for mounting in the switch panel\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitching capacity max. 20 A at 12 V DC or 15 A at 24 V DC\u003c\/li\u003e\n\n\u003cli\u003eOperating current (self-consumption) approx. 18 mA\u003c\/li\u003e\n\n\u003cli\u003eOperating temperature –40 °C to +85 °C\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP67, ignition protected according to ISO 8846\u003c\/li\u003e\n\n\u003cli\u003eLED with a lifespan of approximately 100,000 hours (half-life)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the RCS control switch used for?\u003c\/h3\u003e\u003cp\u003eWhenever a remotely installed main switch relay needs to be conveniently operated from the helm station, without having to lay long main power cables to the control panel. The LED feedback always shows whether the circuit is open or closed.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832137150801,"sku":"700102155","price":41.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700102155_RCS_3d618eda-2ae2-45e5-96e0-0ce022d547b3.png?v=1786391509"},{"product_id":"fbr-500","title":"Main switch relay FBR 500","description":"\u003cp\u003eThe \u003cstrong\u003eFBR 500\u003c\/strong\u003e is a bistable main switch relay (Remote Battery Switch) for on-board installation in boats and vehicles. It switches circuits with up to 500 A remotely via a light control line – the thick, expensive battery cables no longer need to be routed to the switch panel, but only to the relay near the battery. Thanks to magnetic latching technology, the FBR 500 remains completely de-energized in both the open and closed states and therefore consumes no power from the on-board battery.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eBistable (magnetically latching) circuit – no power consumption at rest, neither open nor closed\u003c\/li\u003e\n\n\u003cli\u003eRemote controlled disconnection and connection of circuits via a separate control cable with small cross-section\u003c\/li\u003e\n\n\u003cli\u003eSilver alloy contacts for reliable switching even under load\u003c\/li\u003e\n\n\u003cli\u003eShorter, thinner main cables thanks to mounting close to the battery – less voltage drop, weight and cost compared to a classic battery main switch with long cable runs\u003c\/li\u003e\n\n\u003cli\u003eLED feedback of switching status (optional LED or included remote control switch required)\u003c\/li\u003e\n\n\u003cli\u003eRobust, corrosion-resistant 3\/8\"-16 copper studs and one-piece stainless steel flange nuts for secure connections\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eContact voltage 0–64 V DC, suitable for 12V, 24V, 36V and 48V on-board power systems\u003c\/li\u003e\n\n\u003cli\u003eControl signal: 12 V momentary (DC12V variant) or 24 V momentary (DC24V variant)\u003c\/li\u003e\n\n\u003cli\u003eCranking current (30 sec.) up to 1450 A, continuous current up to 500 A depending on cable cross-section (2× 4\/0 AWG)\u003c\/li\u003e\n\n\u003cli\u003eConnection studs 3\/8\"-16 (M10), maximum tightening torque 140 in-lb (15.8 Nm)\u003c\/li\u003e\n\n\u003cli\u003eProtection class IP66 (protected against strong water jets), ignition protected according to ISO 8846 and SAE J1171\u003c\/li\u003e\n\n\u003cli\u003eIncluded in delivery: Remote control switch (Contura) for control\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhy is a main switch relay like the FBR 500 needed?\u003c\/h3\u003e\u003cp\u003eWhenever batteries or entire circuits need to be safely disconnected remotely without having to lay long and heavy main power cables to the switch panel – for example, when separating starter and house batteries, for service cases, or to reduce fire risks from live long cables. The FBR 500 replaces the classic mechanical main switch with a remotely controllable relay directly at the battery, thereby minimizing cable length, weight, and voltage drop in the on-board electrical system.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"DC12V","offer_id":52832137412945,"sku":"700107700","price":295.0,"currency_code":"EUR","in_stock":true},{"title":"DC24V","offer_id":53258909352273,"sku":"700107702","price":295.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700107702_FBR_66e30b64-1e18-4d28-a87b-b775afd30eef.png?v=1786391531"},{"product_id":"bh-200-f","title":"Battery master switch BH 200 F","description":"\u003cp\u003eThe Kissling BH 200 F battery master switch is a waterproof battery master switch for power distribution in the on-board electrical systems of boats and vehicles with a continuous current of 200 A.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRemovable operating lever in the OFF position prevents unauthorized re-engagement\u003c\/li\u003e\n\n\u003cli\u003eOptional panel or flange mounting for flexible integration in the control cabinet\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eContinuous current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e200 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003ePeak current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e500 A \/ 3 min, 1000 A \/ 30 s\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003emax. 32 V DC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eM10\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eProtection class\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eIP 67\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eØ 55 x 105 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting hole\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eØ 22 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Kissling","offers":[{"title":"Default Title","offer_id":52832146817361,"sku":"600035200","price":63.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/600035200-BH200F.png?v=1780999163"},{"product_id":"bh-200-80-f","title":"Battery master switch BH 200-80 F","description":"\u003cp\u003eThe Kissling BH 200-80 F battery master switch is a waterproof battery master switch for on-board electrical systems with up to 80 V DC and a continuous current of 250 A.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRemovable operating lever provides additional security against unauthorized switching\u003c\/li\u003e\n\n\u003cli\u003eHigh voltage resistance up to 80 V DC – also suitable for higher system voltages\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eContinuous current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e250 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003ePeak current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e500 A \/ 3 min, 1000 A \/ 30 s\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003emax. 80 V DC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eM8\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eProtection class\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eIP 67\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eØ 66\/54 x 105 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting hole\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eØ 22 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Kissling","offers":[{"title":"Default Title","offer_id":52832147177809,"sku":"600035210","price":95.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/600035210_BH200-80.png?v=1780999241"},{"product_id":"bh-220-f-2-polig","title":"Battery Master Switch BH 220 F 2-pole","description":"\u003cp\u003eThe BH 220 F 2-pole battery master switch from Kissling is a waterproof, two-pole battery master switch that simultaneously switches two independent 200 A circuits in the on-board power system.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eTwo independent circuits in one housing instead of two individual switches\u003c\/li\u003e\n\n\u003cli\u003eRemovable switch lever in the OFF position prevents unauthorized re-engagement\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eContinuous current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e2 x 200 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003ePeak current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e2 x 500 A \/ 4 min, 2 x 1000 A \/ 30 s\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003emax. 32 V DC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eM8\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eProtection class\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eIP 67\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e120 x 70 x 120 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting hole\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eØ 22 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Kissling","offers":[{"title":"Default Title","offer_id":52832147374417,"sku":"600035220","price":110.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/600035220.png?v=1768491149"},{"product_id":"bs-5510e","title":"Battery Master Switch 2-Pole BS 5510e","description":"\u003cp\u003eThe \u003cstrong\u003eBS 5510e\u003c\/strong\u003e is the dual-circuit battery master switch from the Blue Sea Systems e-Series, specially designed for electrical systems with two separate, isolated battery banks. It switches both circuits simultaneously via a single knob – ideal for boats and off-road vehicles with strictly separate starting and house batteries or for applications where positive and negative conductors must be disconnected together.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDual-Circuit Technology: switches two electrically isolated battery circuits simultaneously, without connecting the circuits to each other\u003c\/li\u003e\n\n\u003cli\u003eOne of the few designs that can also disconnect positive and negative conductors simultaneously, as there is no combine function\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eOne-piece terminal stud design that won't loosen even with vibration\u003c\/li\u003e\n\n\u003cli\u003eTactile indicators show the switch position even without visual contact\u003c\/li\u003e\n\n\u003cli\u003eFits common mounting patterns for Perko and Guest battery switches\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch Function: Dual Circuit™ – simultaneous switching of two isolated battery circuits\u003c\/li\u003e\n\n\u003cli\u003eContinuous Current: 350 A per circuit\u003c\/li\u003e\n\n\u003cli\u003ePeak Current: 700 A \/ 30 sec. per circuit (Intermittent 5 min.: 525 A per circuit)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 32 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting Type: universal surface, flush, or panel mounting\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, cables up to 4\/0 AWG (120 mm²), 22 mm stud length for multiple cable lugs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eFor which electrical system is the BS 5510e suitable?\u003c\/h3\u003e\u003cp\u003eThe BS 5510e is the right choice when two battery banks – such as a starter battery and a house battery or two completely independent on-board electrical circuits – need to remain strictly separate yet be operated via a common switch. Since the switch does not have a combine function, it is also suitable for installations where both the positive and negative conductors of a circuit are to be interrupted simultaneously.\u003c\/p\u003e\u003cp\u003eTypical applications include boats with separate electrical systems for the engine and living area, as well as off-road and expedition vehicles with independent supply circuits for vehicle electrics and superstructure.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832148619601,"sku":"700125510","price":94.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700105510_82798384-87b4-4f89-bba4-322047b83980.png?v=1775727536"},{"product_id":"bhm-300","title":"Battery master switch BHM 300","description":"\u003cp\u003eThe \u003cstrong\u003eBHM 300 Battery Disconnect Switch\u003c\/strong\u003e from the Blue Sea Systems m-series completely switches a single battery circuit on or off. It is suitable for outboard motors as well as smaller gasoline and diesel engines in boats and for off-road vehicles where a single circuit needs to be safely interrupted – for example, to completely disconnect the battery from the on-board electrical system during workshop maintenance, decommissioning, or in an emergency.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSimple ON\/OFF switching of a battery circuit with a rotary knob\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that won't loosen even under vibration\u003c\/li\u003e\n\n\u003cli\u003eInsulating cover protects the rear contacts\u003c\/li\u003e\n\n\u003cli\u003eBreakout cable entries allow access from multiple directions\u003c\/li\u003e\n\n\u003cli\u003eIncludes label set for identifying switch function\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch function: Single Circuit ON-OFF – a single battery circuit is switched on or off\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 300 A\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 900 A \/ 30 sec. (Intermittent 5 min.: 500 A)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: universal flush, surface, or panel mount\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, 22 mm stud length, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhich electrical system is the BHM 300 suitable for?\u003c\/h3\u003e\u003cp\u003eThe BHM 300 is the ideal solution for all electrical systems where a single battery circuit needs to be reliably disconnected – for example, in outboard motors, smaller diesel or gasoline engines on boats, or in off-road vehicles with a single service battery. With a continuous current of 300 A, it covers the common requirements of smaller to medium-sized engines and consumer circuits.\u003c\/p\u003e\u003cp\u003eThanks to its flexible mounting options, it can be placed directly in the engine compartment or in the switch panel.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832149012817,"sku":"700106006","price":46.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700106006.png?v=1780996475"},{"product_id":"bws-304","title":"Battery selector switch BWS 304","description":"\u003cp\u003eThe \u003cstrong\u003eBWS 304 battery switch\u003c\/strong\u003e from the Blue Sea Systems m-Series selects between two starter batteries for motorboats and also allows parallel operation of both banks. With the four switch positions 1 \/ 1+2 \/ 2 \/ OFF, you can flexibly control which battery (or batteries) start the engine or supply the onboard consumers.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e4 switch positions: Battery 1, Battery 1+2 (Parallel operation\/Combine), Battery 2 or OFF\u003c\/li\u003e\n\n\u003cli\u003eEnables emergency start by connecting both battery banks in parallel\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that won't loosen even under vibration\u003c\/li\u003e\n\n\u003cli\u003eInsulating cover protects the rear contacts, label set included\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch function: Selector 4 Position – switches isolated battery banks individually or combined to all consumers\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 300 A\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 900 A \/ 30 sec. (Intermittent 5 min.: 500 A)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 32 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: universal flush, surface or panel mounting\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat applications is the BWS 304 suitable for?\u003c\/h3\u003e\u003cp\u003eThe BWS 304 is the right choice for motorboats with two starter batteries, where normally one of the two batteries should be used, but if necessary, both banks can also be connected in parallel – for example, to start with the second bank if the starter battery is discharged.\u003c\/p\u003e\u003cp\u003eThe BWS 304 can also be used in off-road vehicles with two independent battery banks for flexible selection or combination of power supply.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832149406033,"sku":"700106007","price":58.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700106007.png?v=1780996531"},{"product_id":"bws-303","title":"Battery Selector Switch BWS 303","description":"\u003cp\u003eThe \u003cstrong\u003eBWS 303 battery selector switch\u003c\/strong\u003e from the Blue Sea Systems m-series selects between two starting batteries for motorboats. Unlike the BWS 304, it does not have a \"combine\" position – the battery banks remain strictly isolated from each other in every switch position.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e3 switch positions: Battery 1, Battery 2, or OFF\u003c\/li\u003e\n\n\u003cli\u003eBattery banks remain electrically isolated in all positions – no accidental paralleling\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that won't loosen under vibration\u003c\/li\u003e\n\n\u003cli\u003eInsulating cover protects rear contacts, label set included\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch function: Selector 3 Position – switches isolated battery banks to all consumers, without a combine function\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 300 A\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 900 A \/ 30 sec. (Intermittent 5 min.: 500 A)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 32 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: universal flush, surface, or panel mount\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat application is the BWS 303 suitable for?\u003c\/h3\u003e\u003cp\u003eThe BWS 303 is suitable for on-board electrical systems where two starting batteries must remain strictly separate and no paralleling option is desired – for example, if different battery types or capacities are installed that should not be discharged together.\u003c\/p\u003e\u003cp\u003eThis makes it a simple, safe alternative to the BWS 304 for anyone who only wants to switch between two batteries but not combine them.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832149799249,"sku":"700106008","price":69.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700106008.png?v=1780996590"},{"product_id":"bhm-220-2-polig","title":"Battery Isolator Switch BHM 220 2-pole","description":"\u003cp\u003eThe \u003cstrong\u003eBHM 220 (2-pole) battery master switch\u003c\/strong\u003e from the Blue Sea Systems m-series switches two isolated circuits simultaneously – for example, two positive poles or the positive and negative conductors of one circuit. As a dual-circuit version without a combine function, it is one of the few Blue Sea switches that are also approved for simultaneous disconnection of positive and negative conductors, making it particularly interesting for boats with metal hulls.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e2-pole design: switches two electrically isolated circuits simultaneously via a single rotary knob\u003c\/li\u003e\n\n\u003cli\u003eApproved for simultaneous switching of positive and negative conductors (no combine function)\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that won't loosen even under vibration\u003c\/li\u003e\n\n\u003cli\u003eInsulating cover protects the rear contacts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitching function: Dual Circuit™ – switches two isolated battery circuits simultaneously, without combine function\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 300 A per circuit\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 675 A \/ 30 sec. per circuit (Intermittent 5 min.: 450 A per circuit)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 32 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: universal flush, surface or panel mount\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhich boat is the BHM 220 suitable for?\u003c\/h3\u003e\u003cp\u003eThe BHM 220 is particularly relevant for boats with metal hulls, where, for corrosion protection reasons, both the positive and negative poles should be disconnected from the onboard electrical system simultaneously. Since the two circuits remain completely electrically isolated and do not have a combine function, the BHM 220 is explicitly approved for this application.\u003c\/p\u003e\u003cp\u003eThe BHM 220 is also a suitable solution for off-road vehicles with two independent, strictly separate circuits.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832149897553,"sku":"700106010","price":76.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700106010.png?v=1780994987"},{"product_id":"bhm-230-2-polig","title":"Battery Disconnect Switch BHM 230 2-pole","description":"\u003cp\u003eThe \u003cstrong\u003eBHM 230 (2-pole) battery master switch\u003c\/strong\u003e from the Blue Sea Systems m-series simultaneously switches the positive terminals of the starter and house batteries. The additional \"Combine\" position allows both battery banks to be connected in parallel, for example, for starting with combined capacity or for joint charging via the alternator current.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eDual Circuit Plus™: switches two isolated battery banks simultaneously or combines them via the Combine position\u003c\/li\u003e\n\n\u003cli\u003eEnables emergency starting or simultaneous charging of both battery banks\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that won't loosen even under vibration\u003c\/li\u003e\n\n\u003cli\u003eInsulating cover protects the rear contacts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitching function: Dual Circuit Plus™ – switches two isolated battery banks simultaneously or combines them to all consumers (Combine); due to the combine function, it is not suitable for simultaneous switching of positive and negative conductors\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 300 A per circuit\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 675 A \/ 30 sec. per circuit (Intermittent 5 min: 450 A per circuit)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 32 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: universal flush, surface, or panel mounting\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhich electrical system is the BHM 230 suitable for?\u003c\/h3\u003e\u003cp\u003eThe BHM 230 is ideal for boats and off-road vehicles with separate starter and house batteries, where both banks should be charged and used independently in normal operation, but parallel operation must be possible if required – for example, if the starter battery is discharged.\u003c\/p\u003e\u003cp\u003eIn combination with an automatic charging relay (ACR), the BHM 230 can also be used for controlled parallel charging of both banks via the alternator.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832150192465,"sku":"700106011","price":73.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700106011.png?v=1780995055"},{"product_id":"bws","title":"Battery Selector Switch BWS 350","description":"\u003cp\u003eThe \u003cstrong\u003eBWS 350 Battery Selector Switch\u003c\/strong\u003e from the Blue Sea Systems e-Series is designed for surface mounting and enables reliable selection between multiple battery banks with a continuous current of 350 A. It is suitable for boats and off-road vehicles with increased power requirements where a compact, surface-mounted selector switch is needed.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eHigh continuous current of 350 A for more demanding electrical systems\u003c\/li\u003e\n\n\u003cli\u003eCompact surface mounting without cutting into the switch panel\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that won't loosen even under vibration\u003c\/li\u003e\n\n\u003cli\u003eTactile detents indicate switch position even without visual contact\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch function: Selector switch for choosing between multiple battery banks\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 350 A\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 1,600 A \/ 100 ms\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 32 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: Surface mount\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for ring terminals, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhich electrical system is the BWS 350 suitable for?\u003c\/h3\u003e\u003cp\u003eThe BWS 350 is the right solution for electrical systems where multiple battery banks are available and need to be specifically controlled via a selector switch – with higher current requirements than the m-Series models. Surface mounting allows for space-saving installation without a panel cutout.\u003c\/p\u003e\u003cp\u003eThis makes the BWS 350 suitable for boats with multiple battery banks as well as off-road and expedition vehicles with demanding electrical system structures.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832154124625,"sku":"700109001","price":70.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700109001_e1e5967b-bf27-4c15-b053-6272f1976a0d.png?v=1786391723"},{"product_id":"bhs-350","title":"Battery master switch BHS 350","description":"\u003cp\u003eThe \u003cstrong\u003eBHS 350 battery master switch\u003c\/strong\u003e from the Blue Sea Systems e-Series completely switches a battery circuit ON or OFF and is designed for universal flush, surface, or panel mounting. With 350 A continuous current, it is suitable for inboard gasoline and diesel engines with higher power requirements than the m-series.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eEasy ON\/OFF switching of a battery circuit with high continuous current\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that will not loosen even under vibration\u003c\/li\u003e\n\n\u003cli\u003e7\/8\" (22 mm) stud length for multiple cable lugs per connection\u003c\/li\u003e\n\n\u003cli\u003eTactile feel indicators show switch position even without visual contact\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitching function: Single Circuit ON-OFF – one battery circuit is switched on or off\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 350 A\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 1,200 A \/ 30 sec. (Intermittent 5 min.: 600 A)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 48 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: universal flush, surface, or panel mounting\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhich engine is the BHS 350 suitable for?\u003c\/h3\u003e\u003cp\u003eThe BHS 350 is designed for inboard gasoline and diesel engines with higher energy demands, where a single battery circuit must be switched reliably. With 350 A continuous current, it exceeds the m-series and thus also covers larger motorizations in boats and off-road vehicles.\u003c\/p\u003e\u003cp\u003eThe robust e-series construction with a one-piece stud design ensures permanently secure connections even under vibration.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832154452305,"sku":"700109003","price":65.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700109003_a1e3ef2b-7f13-4447-a783-9dd2e9844ba9.png?v=1786391724"},{"product_id":"batteriewahlschalter-bws-353","title":"Battery selector switch BWS 353","description":"\u003cp\u003eThe \u003cstrong\u003ebattery selector switch BWS 353\u003c\/strong\u003e from the Blue Sea Systems e-series selects between two isolated battery banks and additionally protects the alternator's diode bridge thanks to an integrated Alternator Field Disconnect (AFD) function, should the switch accidentally be set to OFF while the engine is running.\u003c\/p\u003e\u003ch3\u003eAdvantages\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003e3 switch positions to select between two isolated battery banks\u003c\/li\u003e\n\n\u003cli\u003eIntegrated Alternator Field Disconnect (AFD) function to protect alternator diodes\u003c\/li\u003e\n\n\u003cli\u003eHigh continuous current of 350 A for demanding electrical systems\u003c\/li\u003e\n\n\u003cli\u003eTin-plated copper studs for maximum conductivity and corrosion protection\u003c\/li\u003e\n\n\u003cli\u003eOne-piece stud design that won't loosen even under vibration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eTechnical Data \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eSwitch function: Selector 3 Position with AFD – selects between two isolated battery banks, without combine function\u003c\/li\u003e\n\n\u003cli\u003eContinuous current: 350 A\u003c\/li\u003e\n\n\u003cli\u003ePeak current: 1,200 A \/ 30 sec. (Intermittent 5 min.: 600 A)\u003c\/li\u003e\n\n\u003cli\u003eVoltage: max. 32 V DC\u003c\/li\u003e\n\n\u003cli\u003eMounting type: universal flush, surface, or panel mount\u003c\/li\u003e\n\n\u003cli\u003eConnections: Studs for 3\/8\" (M10) ring terminals, cables up to 4\/0 AWG (120 mm²)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch3\u003eWhat is the purpose of the AFD function in the BWS 353?\u003c\/h3\u003e\u003cp\u003eIf a battery selector switch is accidentally set to OFF while the engine is running, this can damage the alternator's diodes because the excitation field can no longer be de-energized. The Alternator Field Disconnect (AFD) function integrated in the BWS 353 specifically disconnects the alternator's excitation circuit in this case, thus protecting the diode bridge from consequential damage.\u003c\/p\u003e\u003cp\u003eThis makes the BWS 353 particularly suitable for boats and off-road vehicles where the switch is operated during ongoing operation and additional protection for the alternator is desired.\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":52832154976593,"sku":"700111001","price":79.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700111001_d2f4a69c-0462-4ab4-8ad8-62aa1daca79f.png?v=1786391726"},{"product_id":"cg-4-a-200","title":"Key switch CG 4 A 200","description":"\u003cp\u003eThe CG 4 A 200 key switch from Philippi is a lockable 0-1 key switch that allows the FBR 265 remote-controlled battery main switch to be operated safely from an easily accessible location in the boat or vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eRemovable key in the off position prevents unauthorized re-activation of the main switch\u003c\/li\u003e\n\n\u003cli\u003eCompact design for installation in switch panels, control panels or bulkheads\u003c\/li\u003e\n\n\u003cli\u003eEasy retrofitting of existing FBR 265 installations\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIn combination with the FBR 265 remote-controlled main switch, the CG 4 A 200 key switch ensures that the power supply to the on-board electrical system can be interrupted centrally and securely - for example, during shipyard stays or for theft protection. The key can only be removed in the off position.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSwitch positions\u003c\/td\u003e\n\n\u003ctd\u003e0-1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting hole Ø\u003c\/td\u003e\n\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eLoad capacity\u003c\/td\u003e\n\n\u003ctd\u003e10 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOrder no.\u003c\/td\u003e\n\n\u003ctd\u003e640042001\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e The CG 4 A 200 is designed for remote control of the Philippi FBR 265 battery main switch.\u003c\/p\u003e\n\u003ch3\u003eWhich main switch is the CG 4 A 200 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe CG 4 A 200 is used for remote operation of the Philippi FBR 265 battery main switch.\u003c\/p\u003e\n\u003ch3\u003eCan I remove the key?\u003c\/h3\u003e\n\u003cp\u003eYes, the key can be removed in the off position, preventing unauthorized re-activation.\u003c\/p\u003e\n\u003cp\u003eOrder now and safely remotely control the main switch of your on-board electrical system.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832162218321,"sku":"640042001","price":82.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/640042001_CG4.png?v=1776678400"},{"product_id":"bh-400-f-bh-500-f","title":"Battery master switch BH 400 F \/ BH 500 F","description":"\u003cp\u003eThe Kissling BH 400 F \/ BH 500 F battery master switch is a waterproof battery master switch for high current loads and continuous use in the on-board power systems of boats and vehicles.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRemovable operating lever in the OFF position prevents unauthorized re-engagement\u003c\/li\u003e\n\n\u003cli\u003eOptional panel or flange mounting for flexible integration in the control cabinet\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003ePanel or flange mounting\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting hole\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eØ 22 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Kissling","offers":[{"title":"400A","offer_id":52832163922257,"sku":"600035400","price":89.0,"currency_code":"EUR","in_stock":true},{"title":"500A","offer_id":53259322818897,"sku":"600035500","price":151.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/600035400_BH400-500F.png?v=1776680945"},{"product_id":"bh-1000-f","title":"Battery master switch BH 1000 F","description":"\u003cp\u003eThe BH 1000 F battery master switch from Quick is a battery master switch for easy use in the onboard electrical system of boats and vehicles with a continuous current of 140 A.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRemovable switch lever in the off position prevents unauthorised re-engagement\u003c\/li\u003e\n\n\u003cli\u003ePanel or flange mounting for flexible integration in the control cabinet\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eContinuous current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e140 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003emax. 32 V DC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eM10\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e116 x Ø 64 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMounting hole\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eØ 25 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Quick","offers":[{"title":"Default Title","offer_id":52832165560657,"sku":"762100840","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/762100840_BH1000F.png?v=1776694954"},{"product_id":"bh-1000-b","title":"Battery master switch BH 1000 B","description":"\u003cp\u003eThe BH 1000 B battery main switch from Quick is a battery main switch for direct battery mounting in the electrical system of boats and vehicles with 140 A continuous current.\u003c\/p\u003e\u003cul\u003e\n\n\u003cli\u003eRemovable switch lever in the off position prevents unauthorized re-engagement\u003c\/li\u003e\n\n\u003cli\u003eDirect mounting on the battery terminal saves a separate installation location\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eContinuous current\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e140 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003emax. 32 V DC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDesign\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eBattery mounting\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003eM10\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e116 x Ø 64 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Quick","offers":[{"title":"Default Title","offer_id":52832165888337,"sku":"762100842","price":49.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/762100842_BH100B.png?v=1776695392"},{"product_id":"fhr-265","title":"Remote-controlled circuit breaker FHR 265","description":"\u003cp\u003eThe \u003cstrong\u003eRemote-Controlled Circuit Breaker FHR 265\u003c\/strong\u003e from Philippi is a bistable battery master switch relay with integrated control electronics, which conveniently switches the battery circuit in boats and vehicles from any location (DC 12 V \/ 24 V).\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSwitches the main circuit conveniently via a control switch with LED indicator – no long cable runs to the mechanical master switch\u003c\/li\u003e\n\n\u003cli\u003eShort cable runs due to direct mounting on the battery ensure low voltage drops and optimal performance\u003c\/li\u003e\n\n\u003cli\u003eManual emergency operation directly at the front relay terminals as a fallback level in case of remote control failure\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe remote-controlled circuit breaker FHR 265 replaces the classic mechanical battery master switch EBH 250 where remote control of the onboard power system is desired. Switching is conveniently done via a control switch (0-1) with LED indicator – for example, the stainless steel push button WS 22 RG \"Battery\" or the remote control panel FAR – from any location in the boat or vehicle. By installing the FHR 265 near the battery, cable runs to the consumers are shortened, which reduces voltage drops.\u003c\/p\u003e\n\u003cp\u003eIn combination with the battery monitor BLM2, a voltage and capacity-dependent energy management system with deep discharge protection can also be implemented via the potential-free changeover contact of the FHR 265 – particularly important for lithium battery systems, where their flat discharge curve otherwise makes timely disconnection difficult.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eProperty\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\n\u003ctd\u003eDC 12 V + 24 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eContinuous current (conducted)\u003c\/td\u003e\n\n\u003ctd\u003eDC 260 A @ 20 °C, 50 mm²\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOverload \/ Peak current\u003c\/td\u003e\n\n\u003ctd\u003eDC 400 A\/5 s, 1500 A\/0.2 s\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\n\u003ctd\u003e1 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions, connection\u003c\/td\u003e\n\n\u003ctd\u003eL 124 x W 95 x H 50 mm, M8\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eProtection class\u003c\/td\u003e\n\n\u003ctd\u003eIP54\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSKU\u003c\/td\u003e\n\n\u003ctd\u003e083022670\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e For DC 12 V and 24 V onboard power systems; controlled via stainless steel push button WS 22 RG \"Battery\" or remote control panel FAR; potential-free changeover contact for energy management with battery monitor BLM2.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor which onboard voltage is the FHR 265 suitable?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor DC 12 V and 24 V.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs an additional switch or control panel required?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, control is via an external control switch (0-1) with LED indicator, e.g., the stainless steel push button WS 22 RG \"Battery\" or the remote control panel FAR.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens in the event of a remote control failure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eManual emergency operation is possible directly at the front relay terminals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the FHR 265 be integrated into an energy management system?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, via the potential-free changeover contact, in conjunction with the battery monitor BLM2, a voltage and capacity-dependent energy management system with deep discharge protection can be implemented, which is particularly important for lithium batteries.\u003c\/p\u003e\n\u003cp\u003eIf you have any questions about compatibility with your onboard power system, the Philippi-online team will be happy to advise you. Order now.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832178209105,"sku":"083022670","price":189.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/083022670_FHR.png?v=1775804417"},{"product_id":"batteriehauptschalter-bhd-600","title":"Battery master switch BHM 300","description":"\u003cp\u003eBattery master switch BHM for universal flush, surface or panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitching function\u003c\/b\u003e: ON \/ OFF\u003cbr\u003e\u003cb\u003eContinuous current:\u003c\/b\u003e 300 A\u003cbr\u003e\u003cb\u003ePeak current: \u003c\/b\u003e900 A \/ 30 s\u003cbr\u003e\u003cb\u003eVoltage:\u003c\/b\u003e max. 48 V DC\u003cbr\u003e\u003cb\u003eDesign:\u003c\/b\u003e Flush or surface mounting\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M10, length 22 mm, tinned copper, max. tightening torque 13 Nm\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 72 x W 72 x H 55 mm\u003cbr\u003e\u003cb\u003eMounting hole: \u003c\/b\u003eØ 59 mm for rear mounting, Ø 67 mm for front mounting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53424074588497,"sku":"700123000","price":128.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700123000_BHD600_3a9bd528-0cab-4da2-ab9f-5bf1511cd111.png?v=1786391814"},{"product_id":"batteriehauptschalter-bwd-504","title":"Battery master switch BHM 300","description":"\u003cp\u003eBattery master switch BHM for universal flush, surface or panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitching function\u003c\/b\u003e: ON \/ OFF\u003cbr\u003e\u003cb\u003eContinuous current:\u003c\/b\u003e 300 A\u003cbr\u003e\u003cb\u003ePeak current: \u003c\/b\u003e900 A \/ 30 s\u003cbr\u003e\u003cb\u003eVoltage:\u003c\/b\u003e max. 48 V DC\u003cbr\u003e\u003cb\u003eDesign:\u003c\/b\u003e Flush or surface mounting\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M10, length 22 mm, tinned copper, max. tightening torque 13 Nm\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 72 x W 72 x H 55 mm\u003cbr\u003e\u003cb\u003eMounting hole: \u003c\/b\u003eØ 59 mm for rear mounting, Ø 67 mm for front mounting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53424088711505,"sku":"700123002","price":133.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700123002_BWD504_f3c6413a-1848-4c58-bf4f-1cc970da62b4.png?v=1786391817"},{"product_id":"batteriehauptschalter-bhs-330","title":"Battery master switch BHS 350","description":"\u003cp\u003eMain battery switch BHS for universal flush, surface or panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitching function\u003c\/b\u003e: ON \/ OFF\u003cbr\u003e\u003cb\u003eContinuous current:\u003c\/b\u003e 350 A\u003cbr\u003e\u003cb\u003ePeak current: \u003c\/b\u003e1200 A \/ 30 s\u003cbr\u003e\u003cb\u003eVoltage:\u003c\/b\u003e max. 32 V DC\u003cbr\u003e\u003cb\u003eVersion:\u003c\/b\u003e Flush or surface mounting\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M10, length 22 mm, tinned copper, max. tightening torque 15 Nm\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 98 x W 98 x H 76 mm\u003cbr\u003e\u003cb\u003eMounting hole: \u003c\/b\u003eØ 92 mm for rear mounting\u003c\/p\u003e","brand":"Blue Sea Systems","offers":[{"title":"Default Title","offer_id":53424178495825,"sku":"700125511","price":89.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/700125511_BHS330_081622ff-1037-4bbf-8138-0339ff6153c3.png?v=1786391819"},{"product_id":"hauptschalterrelais-xd1pc","title":"ESF 5 fuse block","description":"\u003cp\u003eFuse block for 5 automotive fuses or circuit breakers 1610. Total current carrying capacity 30 A, max. fuse 20 A.\u003cbr\u003eDimensions L 119 x W 40 x H 50 mm\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=htuzxX96ck8\u003cbr\u003e\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":53424626336081,"sku":"787101500","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/787101500_XD1PC.png?v=1775725947"},{"product_id":"batteriehauptschalter-serie-xd1","title":"Battery master switch BHM 300","description":"\u003cp\u003eBattery master switch BHM for universal flush, surface or panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitching function\u003c\/b\u003e: ON \/ OFF\u003cbr\u003e\u003cb\u003eContinuous current:\u003c\/b\u003e 300 A\u003cbr\u003e\u003cb\u003ePeak current: \u003c\/b\u003e900 A \/ 30 s\u003cbr\u003e\u003cb\u003eVoltage:\u003c\/b\u003e max. 48 V DC\u003cbr\u003e\u003cb\u003eDesign:\u003c\/b\u003e Flush or surface mounting\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M10, length 22 mm, tinned copper, max. tightening torque 13 Nm\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 72 x W 72 x H 55 mm\u003cbr\u003e\u003cb\u003eMounting hole: \u003c\/b\u003eØ 59 mm for rear mounting, Ø 67 mm for front mounting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EGIS Mobile Electric","offers":[{"title":"Default Title","offer_id":54120132444497,"sku":"787101900","price":56.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/787101900_EGIS8710-1900.png?v=1782135008"},{"product_id":"bistabiles-relais-relay-2-polig-xd2pc","title":"Battery master switch BHM 300","description":"\u003cp\u003eBattery master switch BHM for universal flush, surface or panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitching function\u003c\/b\u003e: ON \/ OFF\u003cbr\u003e\u003cb\u003eContinuous current:\u003c\/b\u003e 300 A\u003cbr\u003e\u003cb\u003ePeak current: \u003c\/b\u003e900 A \/ 30 s\u003cbr\u003e\u003cb\u003eVoltage:\u003c\/b\u003e max. 48 V DC\u003cbr\u003e\u003cb\u003eDesign:\u003c\/b\u003e Flush or surface mounting\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M10, length 22 mm, tinned copper, max. tightening torque 13 Nm\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 72 x W 72 x H 55 mm\u003cbr\u003e\u003cb\u003eMounting hole: \u003c\/b\u003eØ 59 mm for rear mounting, Ø 67 mm for front mounting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EGIS Mobile Electric","offers":[{"title":"Default Title","offer_id":54120153973073,"sku":"787301505","price":325.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/EGIS8730-1505.png?v=1782135477"},{"product_id":"fernsteuerbarer-hauptschalter-500-mit-nmea-2000-schnittstelle","title":"Battery master switch BHM 300","description":"\u003cp\u003eBattery master switch BHM for universal flush, surface or panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitching function\u003c\/b\u003e: ON \/ OFF\u003cbr\u003e\u003cb\u003eContinuous current:\u003c\/b\u003e 300 A\u003cbr\u003e\u003cb\u003ePeak current: \u003c\/b\u003e900 A \/ 30 s\u003cbr\u003e\u003cb\u003eVoltage:\u003c\/b\u003e max. 48 V DC\u003cbr\u003e\u003cb\u003eDesign:\u003c\/b\u003e Flush or surface mounting\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M10, length 22 mm, tinned copper, max. tightening torque 13 Nm\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 72 x W 72 x H 55 mm\u003cbr\u003e\u003cb\u003eMounting hole: \u003c\/b\u003eØ 59 mm for rear mounting, Ø 67 mm for front mounting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EGIS Mobile Electric","offers":[{"title":"Default Title","offer_id":54120177828177,"sku":"798114500","price":209.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/EGIS9811-4500.png?v=1782135704"},{"product_id":"fernsteuerbarere-2-kanal-batteriehauptschalter","title":"Battery master switch BHM 300","description":"\u003cp\u003eBattery master switch BHM for universal flush, surface or panel mounting.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSwitching function\u003c\/b\u003e: ON \/ OFF\u003cbr\u003e\u003cb\u003eContinuous current:\u003c\/b\u003e 300 A\u003cbr\u003e\u003cb\u003ePeak current: \u003c\/b\u003e900 A \/ 30 s\u003cbr\u003e\u003cb\u003eVoltage:\u003c\/b\u003e max. 48 V DC\u003cbr\u003e\u003cb\u003eDesign:\u003c\/b\u003e Flush or surface mounting\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M10, length 22 mm, tinned copper, max. tightening torque 13 Nm\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 72 x W 72 x H 55 mm\u003cbr\u003e\u003cb\u003eMounting hole: \u003c\/b\u003eØ 59 mm for rear mounting, Ø 67 mm for front mounting\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EGIS Mobile Electric","offers":[{"title":"Default Title","offer_id":54120207581521,"sku":"787201550","price":325.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/EGIS8720-1550.png?v=1782136203"}],"url":"https:\/\/www.philippi-online.de\/en\/collections\/batteriehauptschalter-marine.oembed?page=2","provider":"philippi elektrische systeme GmbH","version":"1.0","type":"link"}