{"title":"Battery monitors","description":"\u003ch3\u003e Battery monitors\u003c\/h3\u003e\n\n \u003cp\u003eFor monitoring the battery system, we offer battery monitors in two screen sizes: 2.4\" and 3.5\" full-color touchscreens. These monitors allow you to read the exact charge level of the service battery at any time. In addition, all relevant battery data, such as current, voltage, remaining capacity, and remaining operating time of the vehicle's main battery, as well as the voltage of two additional starter battery banks, can be viewed. Furthermore, data on battery usage, such as average depth of discharge, unusable battery capacity, and the number of charge\/discharge cycles, are recorded.\u003cbr\u003e\n If the service battery falls below the adjustable capacity threshold or the auxiliary batteries fall below the adjustable voltage thresholds, an acoustic alarm sounds and a corresponding warning message appears on the display.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e very high accuracy (max. 10mA) and large measuring range (10 mA - 300 A or 600A)\u003c\/li\u003e\n\n\u003cli\u003e Automatic battery full detection and charge factor correction\u003c\/li\u003e\n\n\t \u003cli\u003eTracking of effective battery capacity during cyclic operation\u003c\/li\u003e\n\n\u003cli\u003e Detailed information about battery usage, such as the number of charge cycles and deep discharges, average depth of discharge, ...\u003c\/li\u003e\n\n\u003cli\u003e Suitable for all battery nominal voltages (12V\/24V), even in mixed configurations where, for example, the starter battery is 24V and the vehicle electrical system is 12V.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e","products":[{"product_id":"shp-300","title":"Digital Shunt SHP 348","description":"\u003cp\u003eDigital current shunt for installation in the negative line of the charging source.\u003cbr\u003eThe SHP 348 shunt supplements the BTM2, BLM2, and LTM monitors with an additional current measurement (solar).\u003c\/p\u003e\n\u003cp\u003eSuitable for continuous currents up to 300 A.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCurrent carrying capacity:\u003c\/b\u003e 300A, 600A 1min, 1500A 0.5s\u003cbr\u003e\u003cb\u003eCurrent consumption:\u003c\/b\u003e 10 mA@12 V, 5 mA@24 V\u003cbr\u003e\u003cb\u003eOperating voltage:\u003c\/b\u003e DC 8-40 V\u003cbr\u003e\u003cb\u003eMeasurement range:\u003c\/b\u003e 10 mA - 1500 A\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M8 bolt\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 118 x W 40 x H 65 mm\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832150520145,"sku":"070030351","price":119.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/070030351_Shunt_SHP348_a4b857a3-e4e9-452d-9a47-9298d5450127.png?v=1775737642"},{"product_id":"she-300","title":"LIN-Bus Battery Management Shunt SHE 348","description":"\u003cp\u003eDigital battery management shunt for installation in the negative line of the house battery.\u003cbr\u003eThe SHE 348 shunt is compatible with BTM and BLS monitors.\u003cbr\u003eThe shunt is powered via the voltage measurement line of the house battery.\u003c\/p\u003e\n\u003cp\u003eSuitable for continuous charge or discharge currents up to 300 A and battery capacities up to 1000 Ah\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCurrent carrying capacity:\u003c\/b\u003e 300A, 600A 1min, 1500A 0.5s\u003cbr\u003e\u003cb\u003eCurrent consumption:\u003c\/b\u003e 10 mA@12 V, 5 mA@24 V\u003cbr\u003e\u003cb\u003eOperating voltage:\u003c\/b\u003e DC 8-40 V\u003cbr\u003e\u003cb\u003eMeasuring range:\u003c\/b\u003e 10 mA - 1500 A\u003cbr\u003e\u003cb\u003eConnection:\u003c\/b\u003e M8 bolt\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 118 x W 40 x H 65 mm\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832164184401,"sku":"070030348","price":119.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/070030348_she348_shunt_878b9abb-02aa-418e-94c7-e12a6bf5ea0e.png?v=1775824907"},{"product_id":"balmar-batteriemonitor","title":"Balmar battery monitor","description":"\u003cp\u003eThe SG200 battery monitor shows the state of charge of your service battery and, alternatively, the current charging or consumption current. It can be used to call up and set the data and settings of the Balmar alternator regulator. All data can be read out and settings can be made via the app using the optional Bluetooth interface.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage\u003c\/li\u003e\n\u003cli\u003eState of Charge (SoC)\u003c\/li\u003e\n\u003cli\u003eState of Health (SoH)\u003c\/li\u003e\n\u003cli\u003eCurrent (A)\u003c\/li\u003e\n\u003cli\u003eTime Remaining\u003c\/li\u003e\n\u003cli\u003eVoltages for two separate auxiliary batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"x_MsoNormal\"\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eSG200: Battery monitor with shunt\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eSG205 Shunt and Bluetooth interface\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eSG210 \u003c\/span\u003eBattery monitor with shunt \u003cspan lang=\"EN-US\"\u003eand Bluetooth interface\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat is a battery monitor and why is it important?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eWho would deny that it's good to know how much energy is left in a battery? It's like a fuel gauge: you wouldn't drive a car or boat without knowing how much fuel is still in the tank. This is where the battery\u003c\/span\u003e monitor comes in. The most important function is to display the state of charge of a battery or battery bank. The state of charge (SoC) is a percentage that indicates how much of the battery's capacity is still available.\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003eThe SG200 calculates the state of charge very accurately, using a new function: State of Health (SoH). The \"State of Health\" (SoH) is another percentage that compares the nominal capacity of a battery - i.e. the capacity specified by the manufacturer when new - with the actual capacity. This actual capacity decreases over time as the battery ages.\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003eThe SG200 is also not affected by other problems that occur with all other shunt-based systems, such as accuracy drift over multiple partial charge cycles. Simply put, conventional shunt-based products must achieve 100% charge in each cycle. This leads to inaccuracies that multiply with each subsequent cycle in which full 100% charge is not achieved.\u003c\/p\u003e","brand":"Balmar","offers":[{"title":"Balmar \/ SG205","offer_id":52832170213713,"sku":"755020500","price":263.2,"currency_code":"EUR","in_stock":true},{"title":"Balmar \/ SG210","offer_id":53259318100305,"sku":"755021000","price":395.2,"currency_code":"EUR","in_stock":true},{"title":"Balmar \/ SG200","offer_id":53259318133073,"sku":"755020000","price":329.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/755020000_Balmar-BM.png?v=1776772876"},{"product_id":"bls-set","title":"Battery Monitor BLS Set","description":"\u003cp\u003eThe BLS battery monitor is a compact battery monitoring system for battery systems consisting of a 12 \/ 24 V starter battery and one or more parallel-connected 12 \/ 24 V consumer battery(ies). The 2.4\" TFT touch screen displays all important data of the entire battery system at a glance without having to press a button. The built-in brightness sensor automatically dims the screen in the dark, saving valuable energy.\u003cbr\u003e. Display of the current voltage, the current charging or discharging current, the remaining time, the battery temperature and the state of charge of the consumer battery(ies)\u003cbr\u003e. Further information on the use of the consumer battery(ies): number of charging cycles, deep discharges and average discharge depth\u003cbr\u003e. Warning of dangerous deep discharge by an adjustable acoustic alarm.\u003cbr\u003e. Suitable for all battery types such as acid, GEL, AGM and LiFePO4\u003c\/p\u003e\n\u003cp\u003eThe SHE 300 shunt is included in the scope of delivery of the BLS set.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe current software can be found in our download area\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eQuick guide to updating the monitor and shunt\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNominal voltage:\u003c\/b\u003e 12 \/ 24 V\u003cbr\u003e\u003cb\u003eCurrent consumption:\u003c\/b\u003e max. 50 mA @ 12 V, stand-by: 6 mA\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e W 105 x H 75 x D 40 mm\u003cbr\u003e\u003cb\u003eMounting cutout:\u003c\/b\u003e 87 x 65 mm\u003cbr\u003e\u003cb\u003eShunt current carrying capacity:\u003c\/b\u003e 300A, 600A 1 min, 1500A 0.5 s\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/wp-content\/uploads\/philippi\/Info\/philippi20DE-BAT.MONITOR.pdf\" aria-label=\"Weitere Informationen\" tabindex=\"-1\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832170344785,"sku":"071003210","price":265.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/071003210_BLS-Set_d20fcfde-31bf-4876-8ce8-4452b7263c4e.png?v=1776773007"},{"product_id":"balmar-batteriemonitor-mit-nmea-schnittstelle","title":"Balmar battery monitor with NMEA interface ","description":"\u003cp\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eThe SG200 battery monitor displays the state of charge of your service battery and, alternatively, the current charging or consumption current. It can be used to access and adjust the data and settings of the Balmar alternator regulator. All data can be read out and settings made via the app using the optional Bluetooth interface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage\u003c\/li\u003e\n\u003cli\u003eState of Charge (SoC)\u003c\/li\u003e\n\u003cli\u003eState of Health (SoH)\u003c\/li\u003e\n\u003cli\u003eCurrent (A)\u003c\/li\u003e\n\u003cli\u003eTime Remaining\u003c\/li\u003e\n\u003cli\u003eVoltages for two separate auxiliary batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWhat is a battery monitor, and why is it important?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eWho would dispute that it's good to know how much energy is still in a battery? It's like a fuel gauge: you wouldn't drive a car or boat without knowing how much fuel is left in the tank. This is where the battery monitor comes in. Its most important function is to display the state of charge of a battery or battery bank. The State of Charge (SoC) is a percentage value that indicates how much of the battery's capacity is still available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003eThe SG200 calculates the state of charge very accurately, with a new function: State of Health (SoH). The \"State of Health\" (SoH) is another percentage value that compares the nominal capacity of a battery - i.e., the capacity specified by the manufacturer when new - with the actual capacity. This actual capacity decreases over time as the battery ages.\u003c\/p\u003e\n\u003cp class=\"x_MsoNormal\"\u003eThe SG200 is also not affected by other problems that occur with all other shunt-based systems, such as accuracy drift over multiple partial charge cycles. Simply put, conventional shunt-based products must achieve 100% charge in every cycle. This leads to inaccuracies that multiply with each subsequent cycle in which a full 100% charge is not achieved.\u003c\/p\u003e","brand":"Balmar","offers":[{"title":"Balmar \/ SG230","offer_id":52832170508625,"sku":"755021001","price":534.6,"currency_code":"EUR","in_stock":true},{"title":"Balmar \/ SG235","offer_id":53259317969233,"sku":"755021002","price":418.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/755021001_Balmar-BMNMEA.png?v=1776773310"},{"product_id":"bls-set-plus","title":"Battery Monitor BLS Set Plus","description":"\u003cp\u003eBattery monitor BLS for displaying a 12\/24V consumer battery and a 12\/24V starter battery. 2.4\" TFT color touchscreen graphic display with brightness sensor.\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eExpand the BLS monitor into a full-fledged battery charge management system by connecting an ACE series charger:\u003cbr\u003eThe ACE-LIN interface integrated into the ACE automatic charger enables the BLS battery monitor to monitor and control the charging process of the ACE automatic charger to optimize charging. The AC mains voltage, the charging phase, the battery temperature, the charging voltage, and the charging current can also be read from the display. By pressing a button, the charging power can be reduced or SilentMode (fan off) can be activated. For further charging monitoring, a temperature alarm can be defined, for example.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003eThe SHE 300 shunt and the ACE-LIN interface are included in the BLS-Set Plus scope of delivery.\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe current software can be found in our download area\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eQuick guide for updating the monitor and the shunt\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRated voltage:\u003c\/b\u003e 12 \/ 24 V\u003cbr\u003e\u003cb\u003eCurrent consumption:\u003c\/b\u003e max. 50 mA @ 12V, stand-by: 6 mA\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e W 105 x H 75 x D 28 mm\u003cbr\u003e\u003cb\u003eInstallation cutout:\u003c\/b\u003e 87 x 65 mm\u003cbr\u003e\u003cb\u003eShunt current rating:\u003c\/b\u003e 300A, 600A 1min, 1500A 0.5s\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832170803537,"sku":"071003220","price":319.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/071003220_BLS-Set.png?v=1776773536"},{"product_id":"btm2","title":"Battery Tank Monitor BTM2","description":"\u003cp\u003ehttps:\/\/youtube.com\/shorts\/bbxmMqXg6Uwhttps:\/\/youtu.be\/MfBSvrmpMEc\u003c\/p\u003e\n\u003ch3\u003eBattery, Tank and Charging Monitor BTM 2.\u003c\/h3\u003e\n\u003cp\u003eIntuitive, 3.5\" color TFT touchscreen graphic display with brightness sensor for automatic adjustment of display brightness. Includes NMEA 2000 interface.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eThe BTM 2 is the further development of the proven battery tank monitor BTM. It\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eincludes an integrated NMEA2000 interface, which provides the battery and\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003etank data to the NMEA2000 network.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eThis allows the battery and tank data to be displayed on compatible plotters.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003ein addition.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eAll components have been improved in terms of standby consumption, so the BTM2 can remain permanently connected to the battery without any problems.\u003c\/p\u003e\n\u003ch4\u003eNMEA 2000\u003c\/h4\u003e\n\u003cp\u003eThe N2K cable is additionally required for connection to the NMEA2000 network. The pluggable cable connects to an NMEA 2000 on-board network via a T-piece (5 0411 1149). If the connection to a Raymarine network is to be made via Seatalk, a Raymarine Seatalk\/NMEA 2000 adapter cable must also be installed (please order from Raymarine - A06045).\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eBattery Monitoring\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003ePrecise battery information on current voltage, charge or\u003c\/p\u003e\n\u003cp\u003edischarge current, remaining time, temperature and state of charge of the consumer battery. Historical values for the number of charging cycles, deep discharges and average discharge depth give you an overview of battery usage. The voltages of up to 2 starter or bow batteries can be monitored.\u003c\/p\u003e\n\u003cp\u003eThe SHE 300 shunt is not included in the scope of delivery of the BTM2 - please order it separately!\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eSolar Yield Measurement\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003eIf one or more solar panels are to be monitored, you can display the current yield of your solar panels using a power measurement shunt SHP300.\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eTank measurement\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003eAll known Philippi tank sensors such as TGT\/ TGW, UTV, TDS\/TDN and DFS can be connected, as can existing tank sensors from other manufacturers with 10-180Ω \/ 240-33Ω \/ 0-5 V \/ 0-10 V\/ 4-20 mA signals. Each tank can be individually configured for clear assignment, and adaptation to non-linear tank geometries is also possible. Individual tank alarms can be defined for monitoring.\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eAlarm\/Relay contact\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003eAlso new is the potential-free changeover contact with which\u003c\/p\u003e\n\u003cp\u003ein conjunction with a remote-controlled battery\u003c\/p\u003e\n\u003cp\u003emain switch FBR 265 enables voltage- and, importantly, capacity-dependent\u003c\/p\u003e\n\u003cp\u003eenergy management and deep discharge protection.\u003c\/p\u003e\n\u003cp\u003eThis allows consumers to be switched off early before impending\u003c\/p\u003e\n\u003cp\u003edeep discharge and not only when the battery\u003c\/p\u003e\n\u003cp\u003eis deeply discharged. This is particularly important for lithium battery systems,\u003c\/p\u003e\n\u003cp\u003ewhose flat discharge characteristic makes timely voltage shutdown\u003c\/p\u003e\n\u003cp\u003eimpossible.\u003c\/p\u003e\n\u003cp\u003eThe tank sensors, the \"SHE300\" shunt and the NMEA 2000 connection cable \"\u003ca href=\"https:\/\/www.philippi-online.de\/produkt\/n2k-kabel\/\"\u003eN2K cable\u003c\/a\u003e\" or the FBR265 relay must be ordered separately.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOperating voltage: \u003c\/b\u003e8-64 V\u003cb\u003e \u003c\/b\u003e\u003cbr\u003e\u003cb\u003eCurrent consumption: \u003c\/b\u003emax. 70 mA @ 12V, Stand-by: 6 mA\u003cb\u003e \u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDimensions: \u003c\/b\u003eL 105 x W 105 x H 35 mm\u003cbr\u003e\u003cb\u003eInstallation cutout: \u003c\/b\u003e88 x 88 mm\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832171884881,"sku":"071004050","price":285.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/071004050_BTM2.png?v=1775737175"},{"product_id":"blm-set","title":"Battery Monitor BLM2 Set","description":"\u003cp\u003eAll information about the battery system at a glance and optionally on your plotter via the NMEA 2000\/Seatalk NG interface.\u003cbr\u003eMonitoring of the consumer and starter battery via the SHE 300 shunt (included). Optional voltage monitoring of a third battery bank.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBy means of an additional SHP 300 shunt, the power and energy yield of a solar system can be read out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eEffective protection against deep discharge and capacity-dependent energy management via the remote-controlled battery main switch FBR 265.\u003c\/li\u003e\n\u003cli\u003eOptional display of battery data on an NMEA 2000 plotter\u003ca href=\"https:\/\/www.philippi-online.de\/produkt\/n2k-kabel\/\"\u003e via N2K cable.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb style=\"font-size: 14px; color: var(--wd-text-color);\"\u003eNominal voltage: \u003c\/b\u003eDC 12V\/24V\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCurrent consumption: \u003c\/b\u003emax. 70 mA @ 12V, Stand-by: 6 mA\u003cb\u003e \u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDimensions: \u003c\/b\u003eL 105 x W 105 x H 35 mm\u003cbr\u003e\u003cb\u003eMounting cutout: \u003c\/b\u003e88 x 88 mm\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832172278097,"sku":"071004210","price":319.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/071004210_BLM-set-1.png?v=1776774558"},{"product_id":"ltm","title":"Battery Tank Monitor LTM for Lithium Batteries LB","description":"\u003cp\u003eLithium Battery Tank Monitor LTM\u003cbr\u003eBattery, Tank and Charging Monitor LTM. Intuitive 3.5\" color TFT touchscreen graphic display with brightness sensor for automatic adjustment of display brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThe optional tank sensors, the \"SHE 300\" shunt, and the \"ACE-LIN\" charger interface must be ordered separately!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOperating voltage:\u003c\/b\u003e 8-64 V\u003cbr\u003e\u003cb\u003eCurrent consumption:\u003c\/b\u003e max. 70 mA @ 12V, Stand-by: 6 mA\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e L 105 x W 105 x H 35 mm\u003cbr\u003e\u003cb\u003eMounting cutout:\u003c\/b\u003e 88 x 88 mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832172736849,"sku":"071004320","price":319.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/071004050_BTM2_d7c18bfb-e480-4b6a-be13-4c5f040f717c.png?v=1777276574"},{"product_id":"dca2","title":"Battery Tank Monitor BTM2","description":"\u003cp\u003ehttps:\/\/youtube.com\/shorts\/bbxmMqXg6Uwhttps:\/\/youtu.be\/MfBSvrmpMEc\u003c\/p\u003e\n\u003ch3\u003eBattery, Tank and Charging Monitor BTM 2.\u003c\/h3\u003e\n\u003cp\u003eIntuitive, 3.5\" color TFT touchscreen graphic display with brightness sensor for automatic adjustment of display brightness. Includes NMEA 2000 interface.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eThe BTM 2 is the further development of the proven battery tank monitor BTM. It\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eincludes an integrated NMEA2000 interface, which provides the battery and\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003etank data to the NMEA2000 network.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eThis allows the battery and tank data to be displayed on compatible plotters.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003ein addition.\u003c\/p\u003e\n\u003cp style=\"font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-family: Verdana, Geneva, sans-serif; font-size: 14px;\"\u003eAll components have been improved in terms of standby consumption, so the BTM2 can remain permanently connected to the battery without any problems.\u003c\/p\u003e\n\u003ch4\u003eNMEA 2000\u003c\/h4\u003e\n\u003cp\u003eThe N2K cable is additionally required for connection to the NMEA2000 network. The pluggable cable connects to an NMEA 2000 on-board network via a T-piece (5 0411 1149). If the connection to a Raymarine network is to be made via Seatalk, a Raymarine Seatalk\/NMEA 2000 adapter cable must also be installed (please order from Raymarine - A06045).\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eBattery Monitoring\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003ePrecise battery information on current voltage, charge or\u003c\/p\u003e\n\u003cp\u003edischarge current, remaining time, temperature and state of charge of the consumer battery. Historical values for the number of charging cycles, deep discharges and average discharge depth give you an overview of battery usage. The voltages of up to 2 starter or bow batteries can be monitored.\u003c\/p\u003e\n\u003cp\u003eThe SHE 300 shunt is not included in the scope of delivery of the BTM2 - please order it separately!\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eSolar Yield Measurement\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003eIf one or more solar panels are to be monitored, you can display the current yield of your solar panels using a power measurement shunt SHP300.\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eTank measurement\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003eAll known Philippi tank sensors such as TGT\/ TGW, UTV, TDS\/TDN and DFS can be connected, as can existing tank sensors from other manufacturers with 10-180Ω \/ 240-33Ω \/ 0-5 V \/ 0-10 V\/ 4-20 mA signals. Each tank can be individually configured for clear assignment, and adaptation to non-linear tank geometries is also possible. Individual tank alarms can be defined for monitoring.\u003c\/p\u003e\n\u003ch4\u003e\u003cb\u003eAlarm\/Relay contact\u003c\/b\u003e\u003c\/h4\u003e\n\u003cp\u003eAlso new is the potential-free changeover contact with which\u003c\/p\u003e\n\u003cp\u003ein conjunction with a remote-controlled battery\u003c\/p\u003e\n\u003cp\u003emain switch FBR 265 enables voltage- and, importantly, capacity-dependent\u003c\/p\u003e\n\u003cp\u003eenergy management and deep discharge protection.\u003c\/p\u003e\n\u003cp\u003eThis allows consumers to be switched off early before impending\u003c\/p\u003e\n\u003cp\u003edeep discharge and not only when the battery\u003c\/p\u003e\n\u003cp\u003eis deeply discharged. This is particularly important for lithium battery systems,\u003c\/p\u003e\n\u003cp\u003ewhose flat discharge characteristic makes timely voltage shutdown\u003c\/p\u003e\n\u003cp\u003eimpossible.\u003c\/p\u003e\n\u003cp\u003eThe tank sensors, the \"SHE300\" shunt and the NMEA 2000 connection cable \"\u003ca href=\"https:\/\/www.philippi-online.de\/produkt\/n2k-kabel\/\"\u003eN2K cable\u003c\/a\u003e\" or the FBR265 relay must be ordered separately.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOperating voltage: \u003c\/b\u003e8-64 V\u003cb\u003e \u003c\/b\u003e\u003cbr\u003e\u003cb\u003eCurrent consumption: \u003c\/b\u003emax. 70 mA @ 12V, Stand-by: 6 mA\u003cb\u003e \u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDimensions: \u003c\/b\u003eL 105 x W 105 x H 35 mm\u003cbr\u003e\u003cb\u003eInstallation cutout: \u003c\/b\u003e88 x 88 mm\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":53556977795409,"sku":"070004000","price":285.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/070004000_DCA2.png?v=1776430570"},{"product_id":"controll-unit-pcu","title":"PCU Control Unit","description":"\u003cp data-end=\"580\" data-start=\"160\"\u003eDie PCU ist das intelligente Herzstück moderner Bordelektrik in Fahrzeugen. Als zentrale Steuer- und Überwachungseinheit vereint sie sämtliche relevanten Informationen und Funktionen in einem einzigen, übersichtlichen System. Anstelle vieler einzelner Anzeigen bietet die PCU ein intuitives Display, das Ihnen jederzeit volle Kontrolle über Ihr Fahrzeug ermöglicht.\u003c\/p\u003e\n\u003cp data-end=\"941\" data-start=\"582\"\u003eIm Mittelpunkt steht ein umfassendes Energiemanagement: Die PCU liefert präzise Echtzeitdaten zu Batteriezustand, Spannung, Stromfluss und Temperatur und sorgt gleichzeitig für eine sichere Überwachung der Starterbatterie. Ergänzt wird dies durch eine exakte Tanküberwachung für Frisch-, Grau- und Schwarzwasser – kompatibel mit den gängigsten Sensorsystemen.\u003c\/p\u003e\n\u003cp data-end=\"1240\" data-start=\"943\"\u003eBesonders anschaulich ist die integrierte Energiefluss-Darstellung. Sie visualisiert alle Energiequellen und Verbraucher im Fahrzeug, darunter Solaranlage, Ladebooster, Inverter und weitere Komponenten. So behalten Sie jederzeit den Überblick über Erzeugung, Speicherung und Verbrauch von Energie.\u003c\/p\u003e\n\u003cp data-end=\"1504\" data-start=\"1242\"\u003eNeben den technischen Kernfunktionen überzeugt die PCU durch hohen Bedienkomfort. Sie zeigt Innen- und Außentemperaturen an und ermöglicht die zentrale Steuerung verschiedenster Geräte über CI- und CAN-Bus – etwa Kühlschränke, Heizungen oder weitere Bordtechnik.\u003c\/p\u003e\n\u003cp data-end=\"1794\" data-start=\"1506\"\u003eDank umfangreicher Schnittstellen lässt sich die PCU flexibel und nahtlos in bestehende Bordnetzsysteme integrieren. In Kombination mit dem CONNECT HUB wird die Installation besonders effizient: Alle Sensoren werden zentral angeschlossen, während nur ein einziges Kabel zum Display führt.\u003c\/p\u003e\n\u003cp data-end=\"2000\" data-start=\"1796\"\u003eOptional kann das System durch die Smart Control Unit (SCU) erweitert werden. Damit wird die PCU zu einem leistungsstarken Lastmanagementsystem mit zusätzlichen Steuerungs- und Automatisierungsfunktionen.\u003ca class=\"clickable-chip color-info\" href=\"https:\/\/admin.shopify.com\/store\/philippi-elektrische-systeme-gmbh\/collections\/666740359505\" aria-label=\"Kollektion „P-Bus“ anzeigen\"\u003e\u003cspan class=\"content\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Mit Rahmen","offer_id":54005284405585,"sku":"071002255","price":479.0,"currency_code":"EUR","in_stock":true},{"title":"Rahmenlos","offer_id":54005297283409,"sku":"071002260","price":479.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/071002255_PCL-Menu2.png?v=1777896457"}],"url":"https:\/\/www.philippi-online.de\/en\/collections\/batterie-monitore-marine.oembed","provider":"philippi elektrische systeme GmbH","version":"1.0","type":"link"}