{"title":"AC Panels","description":"","products":[{"product_id":"lae-234-lg-lgw","title":"Shore power unit LAE 234 LG","description":"\u003cp\u003eThe \u003cstrong\u003eshore power unit LAE 234 LG\u003c\/strong\u003e from Philippi is a switch panel for the AC onboard power system of yachts. It combines, protects, and monitors shore power (230 V\/50 Hz) and a generator via a switch. It fits into the Series 200 circuit breaker distribution system and connects via rear terminals.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eOne panel for two power sources: safe switching between shore power and onboard generator without additional wiring\u003c\/li\u003e\n\n\u003cli\u003eComplete protection of the AC onboard power system via RCBO and four separate circuits instead of just one central circuit breaker\u003c\/li\u003e\n\n\u003cli\u003eImmediate control of the network status via 3 network indicator lights and AC voltmeter, no need for a multimeter\u003c\/li\u003e\n\n\u003cli\u003eBack-of-hand-safe terminal design for secure installation even in limited space behind the switch panel\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIn everyday yachting, the LAE 234 LG plays a central role in shore power supply: when docking, the shore-generator changeover switch selects between shore connection or marina connection and the yacht's own generator, without having to replug connectors. The RCBO circuit breaker (16 A\/30 mA) provides overall protection for the supply, while four double-pole thermal circuit breakers (10 A, 230 V\/50 Hz) separately disconnect the individual 230 V consumer circuits. Three network indicator lights and the integrated AC voltmeter show at all times whether shore power or the generator is active and at what voltage.\u003c\/p\u003e\n\u003cp\u003eSince the shore power unit is designed to fit precisely with the Series 200 circuit distribution panels, it can be integrated into existing Philippi switch panels. The rear electrical construction is designed to be back-of-hand safe; nevertheless, the rear must only be accessible with tools and covered when installed. If the supply point is more than 3 m away, the supply cable must also be protected with an MCB circuit breaker (e.g., LAE 205) near the supply point. Versions with higher current ratings are available upon request.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eFunction\u003c\/td\u003e\n\n\u003ctd\u003eShore-generator changeover switch for AC 230 V\/50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMain circuit breaker\u003c\/td\u003e\n\n\u003ctd\u003eRCBO 16 A \/ 30 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConsumer circuits\u003c\/td\u003e\n\n\u003ctd\u003e4 x double-pole thermal circuit breaker, 10 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNetwork display\u003c\/td\u003e\n\n\u003ctd\u003e3 network indicator lights + AC voltmeter\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\n\u003ctd\u003eW 210 x H 210 x D 110 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCut-out dimensions\u003c\/td\u003e\n\n\u003ctd\u003e186 x 186 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003erear terminals\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSKU\u003c\/td\u003e\n\n\u003ctd\u003e010002340\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003eThe LAE 234 LG is matched to the Series 200 circuit distribution panels. A labeling set SKZ for boats and black mounting screws are included in the scope of delivery; for use in vehicles, the SKZ-MOBIL labeling set is optionally available.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the shore-generator changeover switch do?\u003c\/strong\u003e\u003cbr\u003eIt enables switching between shore power and generator as the power source for the AC onboard system without changing the wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs additional protection needed?\u003c\/strong\u003e\u003cbr\u003eIf the distance to the supply point is more than 3 m, the supply cable must also be protected with an MCB circuit breaker (e.g., LAE 205).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LAE 234 LG also suitable for vehicles?\u003c\/strong\u003e\u003cbr\u003eYes, the optional labeling set for vehicles (SKZ-MOBIL) is available for this purpose; the standard delivery includes the SKZ set for boats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LAE 234 LG fit my circuit distribution panel?\u003c\/strong\u003e\u003cbr\u003eYes, it is designed to fit the Series 200 circuit distribution panels and connects via rear terminals.\u003c\/p\u003e\n\u003cp\u003eFor questions about compatibility with your switch panel, the Philippi team will be happy to advise you. Order now.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832127680849,"sku":"010002340","price":615.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010002340_LAE234LG.png?v=1775829545"},{"product_id":"lar","title":"Grid control panel LAR","description":"\u003cp\u003eThe \u003cstrong\u003ePhilippi Mains Control Panel LAR\u003c\/strong\u003e is a compact shore power unit that immediately indicates via a light display whether the AC onboard electrical system is correctly connected to the AC shore power system – suitable for the Series 200 circuit distributors on board yachts.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eDetects swapped phase (L) and neutral (N) at a glance before consumers are connected\u003c\/li\u003e\n\n\u003cli\u003eReliably warns with a red light in case of incorrect connection, green light confirms a correct shore connection\u003c\/li\u003e\n\n\u003cli\u003eCompact design for space-saving installation in the switch cabinet or in the shore power distribution panel\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe measuring leakage current of the LAR is 1.4 mA. The panel is not suitable for AC networks without a protective conductor, as error detection is not possible there. Consumer supply lines are connected via flat spade terminals (6.3 mm) on the rear; this is designed to be touch-safe to prevent electric shock but must still be installed so that it is only accessible with tools and is covered.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMeasuring Leakage Current\u003c\/td\u003e\n\n\u003ctd\u003e1.4 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003eFlat spade terminals 6.3 mm (rear)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\n\u003ctd\u003e105 x 52.5 x 50 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting Cutout\u003c\/td\u003e\n\n\u003ctd\u003e81 x 28.5 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSKU\u003c\/td\u003e\n\n\u003ctd\u003e010000231\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e The LAR is intended as an addition to the Philippi Series 200 DC circuit distributors.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the red indicator on the LAR mean?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRed light indicates that the phase (L) and neutral (N) are connected incorrectly (swapped).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LAR suitable for all AC networks?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo, it is not suitable for AC networks without a protective conductor, as error detection is not possible there.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the LAR connected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConsumer supply lines are connected via flat spade terminals (6.3 mm) on the rear.\u003c\/p\u003e\n\u003cp\u003eOrder now and safely control your shore power connection in the onboard electrical system at all times.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832128663889,"sku":"010000231","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010000231-LAR.png?v=1781006374"},{"product_id":"lae-232","title":"Shore power connection unit LAE 232","description":"\u003cp\u003eThe Philippi Shore Power Unit LAE 232 is a shore power unit for AC 230 V power distribution in the on-board electrical system of boats and vehicles, compatible with the Series 200 circuit distribution panels. It is suitable for yacht owners and campervan builders who require a secure, rear-connectable shore power input with integrated subordinate protection.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eResidual current and personal protection by the RCBO circuit breaker (16 A \/ 30 mA)\u003c\/li\u003e\n\n\u003cli\u003eTwo additional two-pole thermal circuit breakers (10 A) for subordinate protection of downstream circuits\u003c\/li\u003e\n\n\u003cli\u003eBack-of-hand safe rear-mounted construction protects against electric shock with proper installation\u003c\/li\u003e\n\n\u003cli\u003eCompatible with Philippi Series 200 circuit distribution panels, including labeling set\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe LAE 232 from Philippi supplies the on-board electrical system with AC 230 V \/ 50 Hz and protects the power input via an RCBO circuit breaker (16 A \/ 30 mA) and two two-pole thermal circuit breakers (10 A). A mains indicator shows the mains status, and connection is made via rear terminals. The rear electrical construction is designed to be back-of-hand safe; the panel must be installed so that the rear side is only accessible and covered with tools.\u003c\/p\u003e\n\u003cp\u003eIf the supply point is more than 3 m away from the LAE 232, the supply cable must be additionally protected with an MCB circuit breaker (e.g., Philippi LAE 205) near the supply point. The scope of delivery includes an SKZ labeling set for boats and black mounting screws; an SKZ-MOBIL labeling set for vehicles is optionally available.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eNominal voltage\u003c\/td\u003e\n\n\u003ctd\u003eAC 230 V \/ 50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eRCBO circuit breaker\u003c\/td\u003e\n\n\u003ctd\u003e16 A \/ 30 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eThermal circuit breakers\u003c\/td\u003e\n\n\u003ctd\u003e2 x 2-pole, 10 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003erear terminals\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\n\u003ctd\u003eW 105 x H 210 x D 100 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting cutout\u003c\/td\u003e\n\n\u003ctd\u003e81 x 186 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\n\u003ctd\u003eSKZ labeling set, mounting screws (optional SKZ-MOBIL)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eItem No.\u003c\/td\u003e\n\n\u003ctd\u003e010002320\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003eCompatibility: The LAE 232 is designed to match the Philippi Series 200 circuit distribution panels. If the distance to the supply point is more than 3 m, Philippi additionally recommends the MCB circuit breaker LAE 205.\u003c\/p\u003e\n\u003ch3\u003eWhich circuit distribution panels is the LAE 232 compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe LAE 232 is designed to be compatible with the Philippi Series 200 circuit distribution panels.\u003c\/p\u003e\n\u003ch3\u003eDo I need to consider anything if the distance to the supply point is greater?\u003c\/h3\u003e\n\u003cp\u003eYes, if the distance to the supply point is more than 3 m, the supply cable must be additionally protected near the supply point by an MCB circuit breaker (e.g., LAE 205).\u003c\/p\u003e\n\u003ch3\u003eWhich circuit breakers are installed in the LAE 232?\u003c\/h3\u003e\n\u003cp\u003eAn RCBO circuit breaker (16 A \/ 30 mA) and 2 two-pole thermal circuit breakers (10 A) for AC 230 V \/ 50 Hz.\u003c\/p\u003e\n\u003ch3\u003eIs the LAE 232 also suitable for vehicles?\u003c\/h3\u003e\n\u003cp\u003eYes, an optional SKZ-MOBIL labeling set is available for installation in vehicles.\u003c\/p\u003e\n\u003cp\u003eIf you have any questions about compatibility with your circuit distribution panel, the Philippi-online team will be happy to advise you – order now.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832132104529,"sku":"010002320","price":320.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010002320-LAE232_MJ17.png?v=1781006944"},{"product_id":"lae-233","title":"Shore power unit LAE 233","description":"\u003cp\u003eThe Philippi Shore Power Unit LAE 233 is a power distributor with 3 circuits for AC shore power connection on boats, protecting 230V consumers via double-pole rocker circuit breakers. It is precisely designed for the Series 200 circuit distribution panels and intended for installation in a control cabinet or panel cutout.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e3 separately fused circuits for various 230V consumers on board\u003c\/li\u003e\n\n\u003cli\u003eCompact panel size for retrofitting into existing switch panels\u003c\/li\u003e\n\n\u003cli\u003eFast wiring thanks to pre-assembled spade terminals instead of screw terminals\u003c\/li\u003e\n\n\u003cli\u003eOptional vehicle labeling set for use beyond boats\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe LAE 233 distributes the incoming shore power to three separately protected 230V circuits, making it the central distribution unit for sockets, chargers, or air conditioning on board. Each of the three circuits is equipped with a double-pole thermal rocker circuit breaker for 10 A at 230 V \/ 50 Hz. Consumer supply lines are connected via 6.3 mm spade terminals on the back of the circuit breakers; the included supply cables are 70 cm long.\u003c\/p\u003e\n\u003cp\u003ePhilippi supplies the LAE 233 as standard with an SKZ labeling set for boats and black mounting screws; a labeling set for vehicles (SKZ-MOBIL) is also available upon request. The panel must be installed so that the rear side with the live components is only accessible and covered with tools.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCircuits\u003c\/td\u003e\n\n\u003ctd\u003e3 x double-pole thermal rocker circuit breakers, 10 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\n\u003ctd\u003eAC 230 V \/ 50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003e6.3 mm spade terminals, 70 cm supply cable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\n\u003ctd\u003e105 x 105 x 70 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting Cutout\u003c\/td\u003e\n\n\u003ctd\u003e81 x 81 mm (12 mm smaller per edge than the panel)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eScope of Delivery\u003c\/td\u003e\n\n\u003ctd\u003eSKZ labeling set (boats), black mounting screws\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003eThe LAE 233 is compatible with the Philippi Series 200 circuit distributors and can be combined with other AC shore power units from this series, such as the LAR mains control panel for displaying correct shore power polarity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LAE 233 shore power unit require an additional residual current device?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes, the panel is only permissible if there is an upstream protection with an RCBO (RCD\/MCB) circuit breaker.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow large must the mounting cutout for the LAE 233 be?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mounting cutout can be 12 mm smaller per edge than the panel dimensions (W 105 x H 105 mm), i.e., 81 x 81 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LAE 233 also designed for use in vehicles?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe scope of delivery includes an SKZ labeling set for boats and black mounting screws; a set for vehicles (SKZ-MOBIL) is also available upon request.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow are consumers connected to the LAE 233?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConsumer supply lines are connected via 6.3 mm spade terminals on the back of the rocker circuit breakers; the supply cables are 70 cm long.\u003c\/p\u003e\n\u003cp\u003eIf you have any questions about compatibility with your circuit distributor, the Philippi team will be happy to advise you. Order now.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832132366673,"sku":"010002332","price":138.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010002332-LAE233.png?v=1775648612"},{"product_id":"lae-234-lgk","title":"Shore power connection unit LAE 234 LGK for combination inverters","description":"\u003cp\u003eThe Philippi Shore Power Unit LAE 234 LGK is a shore power unit for combi inverters with a shore\/generator changeover switch (25 A) and integrated consumer isolation during inverter operation for boats with a 230 V onboard electrical system. It is compatible with the Series 200 circuit distribution panels and designed for AC generators up to 6 kW.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSecure combination of shore power, generator, and inverter in one panel\u003c\/li\u003e\n\n\u003cli\u003eAutomatic consumer isolation when switching to inverter operation\u003c\/li\u003e\n\n\u003cli\u003eFour separately fused 230 V circuits for various onboard consumers\u003c\/li\u003e\n\n\u003cli\u003eMonitoring of shore power and onboard voltage via integrated indicator lights and voltmeter\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe LAE 234 LGK combines shore power connection, generator feed, and a combi inverter in one unit, automatically switching between the sources. The integrated shore\/generator changeover switch (25 A) isolates defined consumers during inverter operation to prevent the inverter from being overloaded. An RCBO protective switch (32 A \/ 30 mA) protects the entire unit, while three AC mains indicator lights and a 230 V voltmeter display the status of the shore power. Four two-pole thermal circuit breakers (10 A, 230 V \/ 50 Hz) distribute power to individual consumer circuits.\u003c\/p\u003e\n\u003cp\u003eConnection is via rear terminals; the electrical design is back-of-hand safe for protection against electric shock. The panel must be installed so that the rear is only accessible with tools and is covered. If the feed point is more than 3 m away, the supply line near it must be additionally protected with an MCB circuit breaker (e.g., Philippi LAE 205). The scope of delivery includes a labeling set SKZ for boats and black mounting screws; a set for vehicles (SKZ-MOBIL) is available on request.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCircuit breaker\u003c\/td\u003e\n\n\u003ctd\u003eRCBO 32 A \/ 30 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOutput circuits\u003c\/td\u003e\n\n\u003ctd\u003e4 x two-pole thermal circuit breaker, 10 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\n\u003ctd\u003eAC 230 V \/ 50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eIndicators\u003c\/td\u003e\n\n\u003ctd\u003e3 AC mains indicator lights, voltmeter 230 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eGenerator power\u003c\/td\u003e\n\n\u003ctd\u003eup to 6 kW (more powerful version on request)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003erear terminals, back-of-hand safe\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\n\u003ctd\u003e210 x 210 x 110 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInstallation cutout\u003c\/td\u003e\n\n\u003ctd\u003e186 x 186 mm (12 mm smaller per edge than the panel)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eScope of delivery\u003c\/td\u003e\n\n\u003ctd\u003eLabeling set SKZ (boats), black mounting screws\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003eThe LAE 234 LGK is compatible with the Philippi Series 200 circuit distribution panels and can be supplemented with upstream MCB circuit breakers like the LAE 205 for longer supply lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the shore\/generator changeover switch of the LAE 234 LGK needed for?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt switches between shore power and generator feed and provides integrated consumer isolation during inverter operation, allowing a combi inverter to be safely integrated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat generator power is the LAE 234 LGK designed for?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe unit is suitable for AC generators up to 6 kW; a more powerful version is available on request.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs additional protection necessary if the distance to the feed point is greater?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the distance to the feed point is more than 3 m, the supply line near it must be additionally protected with an MCB circuit breaker (e.g., LAE 205).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow large must the installation cutout for the LAE 234 LGK be?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe installation cutout can be chosen 12 mm smaller per edge than the panel dimensions (W 210 x H 210 mm), i.e., 186 x 186 mm.\u003c\/p\u003e\n\u003cp\u003eFor questions about the design of your shore power and generator system, the Philippi team will be happy to advise you. Order now.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832132792657,"sku":"010002342","price":719.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010002342_LAE234LG.png?v=1775742625"},{"product_id":"lae-235","title":"Shore power unit LAE 235","description":"\u003cp\u003eThe Philippi Shore Power Unit LAE 235 is a shore power unit with an RCBO circuit breaker (16 A \/ 30 mA), mains control indicator, and Schuko socket for 230 V onboard electrical systems on boats. It is compatible with the Series 200 circuit distribution panels and is used for the safe, direct connection of 230 V consumers to shore power.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eDirect socket connection for 230 V devices without additional wiring\u003c\/li\u003e\n\n\u003cli\u003eIntegrated residual current protection reliably protects the onboard system and user\u003c\/li\u003e\n\n\u003cli\u003eMains control indicator shows at a glance whether shore power is correctly applied\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe LAE 235 combines residual current protection, mains control, and a Schuko socket in one compact panel, making it ideal as a central shore power distribution point on board. The integrated RCBO circuit breaker (16 A \/ 30 mA) protects both the socket and downstream consumers from fault currents, while the mains control indicator signals the correct connection to the shore power grid. Connection is made via rear terminals; the electrical design is back-of-hand safe to protect against electric shock.\u003c\/p\u003e\n\u003cp\u003eThe panel must be installed in such a way that the rear is only accessible and covered with tools. If the feed-in point is more than 3 m away, the supply line in its vicinity must be additionally protected with an MCB circuit breaker (e.g., Philippi LAE 205).\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCircuit breaker\u003c\/td\u003e\n\n\u003ctd\u003eRCBO 16 A \/ 30 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eEquipment\u003c\/td\u003e\n\n\u003ctd\u003eMains control indicator, Schuko socket\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\n\u003ctd\u003eAC 230 V \/ 50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003eRear terminals, back-of-hand safe\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\n\u003ctd\u003e105 x 210 x 100 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMounting cutout\u003c\/td\u003e\n\n\u003ctd\u003e81 x 186 mm (12 mm smaller per edge than the panel)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003eThe LAE 235 is compatible with Philippi Series 200 circuit distribution panels and can be combined with an upstream MCB circuit breaker such as the LAE 205 for longer supply lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the purpose of the Schuko socket on the LAE 235?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt enables the direct connection of 230 V consumers via a standard Schuko socket on the shore power panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs additional protection necessary if the distance to the feed-in point is greater?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf the distance to the feed-in point is more than 3 m, the supply line in its vicinity must be additionally protected with an MCB circuit breaker (e.g., LAE 205).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow large must the mounting cutout for the LAE 235 be?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe mounting cutout can be chosen to be 12 mm smaller per edge than the panel dimensions (W 105 x H 210 mm), i.e., 81 x 186 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the LAE 235 be combined with the Series 200 circuit distribution panels?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes, it is compatible with the Series 200 circuit distribution panels.\u003c\/p\u003e\n\u003cp\u003eIf you have any questions about compatibility with your circuit distribution panel, the Philippi team will be happy to advise you. Order now.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832133218641,"sku":"010002350","price":269.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010002350_LAE235-MJ17.png?v=1781006980"},{"product_id":"lae-236","title":"Shore power unit LAE 236","description":"\u003cp\u003eThe Philippi LAE 236 shore power unit is an AC power distributor with 6 circuits for shore power connection on yachts, compatible with the Series 200 circuit distributors. Each circuit is protected by a 10 A, 2-pole thermal rocker circuit breaker for 230 V \/ 50 Hz.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eReliably supplies up to 6 consumer circuits from the shore power grid\u003c\/li\u003e\n\n\u003cli\u003eRobust 2-pole rocker circuit breakers instead of electronic components – safe even in damp conditions on board\u003c\/li\u003e\n\n\u003cli\u003eLabeling set SKZ included, allowing for immediate clear labeling\u003c\/li\u003e\n\n\u003cli\u003ePrecise installation cutout saves effort during panel mounting\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe LAE 236 safely distributes incoming shore power to multiple consumer circuits on board. Consumer leads are connected via 6.3 mm spade terminals on the back of the rocker circuit breakers; the supplied leads are 70 cm long. This allows the panel to be quickly integrated into the on-board electrical system of Series 200 family yachts.\u003c\/p\u003e\n\u003cp\u003eThe Philippi LAE 236 shore power unit includes an SKZ labeling set (for boats) and black mounting screws; a set for vehicles (SKZ-MOBIL) is optionally available. The panel must be installed so that the rear side is only accessible and covered with tools.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCircuits\u003c\/td\u003e\n\n\u003ctd\u003e6, each 10 A \/ 230 V, 50 Hz\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCircuit Breaker\u003c\/td\u003e\n\n\u003ctd\u003e2-pole thermal rocker circuit breakers\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003e6.3 mm spade terminals, 70 cm lead\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\n\u003ctd\u003e105 x 210 x 70 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eInstallation Cutout\u003c\/td\u003e\n\n\u003ctd\u003e81 x 186 mm (12 mm smaller per edge)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePart No.\u003c\/td\u003e\n\n\u003ctd\u003e0 1000 2362\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003eCompatible with Series 200 circuit distributors; SKZ and SKZ-MOBIL labeling sets are available as complements.\u003c\/p\u003e\n\u003ch3\u003eDoes the LAE 236 require an RCD upstream?\u003c\/h3\u003e\n\u003cp\u003eYes, the panel absolutely requires a residual current device (RCBO) upstream.\u003c\/p\u003e\n\u003ch3\u003eHow many circuits does the LAE 236 offer?\u003c\/h3\u003e\n\u003cp\u003eThe LAE 236 features 6 circuits with 2-pole thermal rocker circuit breakers, 10 A for AC 230 V \/ 50 Hz.\u003c\/p\u003e\n\u003ch3\u003eWhat size cutout is needed for the LAE 236?\u003c\/h3\u003e\n\u003cp\u003eThe installation cutout can be 12 mm smaller per edge than the panel dimensions (W 105 x H 210 mm), i.e., 81 x 186 mm.\u003c\/p\u003e\n\u003ch3\u003eIs a labeling set included with the LAE 236?\u003c\/h3\u003e\n\u003cp\u003eYes, an SKZ labeling set for boats and black mounting screws are included; for vehicles, the SKZ-MOBIL set is additionally available.\u003c\/p\u003e\n\u003cp\u003eFor questions regarding compatibility with your Series 200 onboard network, we are happy to advise you.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832133546321,"sku":"010002362","price":255.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010002362_LAE236.png?v=1775742568"},{"product_id":"landanschlusseinheit-lae-234-lgw","title":"Shore connection unit LAE 234 LGW","description":"\u003cp\u003eThe shore power unit LAE 234 LGW is a power distribution system from Philippi for boats and yachts, which enables a safe switch between shore power and generator using a shore-generator (LG) or shore-generator-inverter switch (LGW). It secures four 230 V output circuits and is suitable for the Series 200 circuit distributors.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSafe switching between shore power and onboard generator without rewiring\u003c\/li\u003e\n\n\u003cli\u003eProtection of people and the onboard electrical system through RCBO circuit breakers and back-of-hand safe, touch-protected design\u003c\/li\u003e\n\n\u003cli\u003ePerfectly matching addition to Series 200 switch panels\u003c\/li\u003e\n\n\u003cli\u003eImmediately ready for use thanks to the included SKZ labeling set and mounting screws\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe shore power unit LAE 234 LGW indicates the status of the power supply via 3 mains indicator lights and an AC voltmeter 230 V and distributes the power to four two-pole fused output circuits. Connection is made via terminals on the rear; the rear electrical structure is designed to be back-of-hand safe for protection against electric shock, so the panel must be installed in such a way that the rear is only accessible and covered with tools.\u003c\/p\u003e\n\u003cp\u003eIf the distance to the feed-in point is more than 3 m, the supply line must be additionally secured there by means of an MCB circuit breaker (e.g. LAE 205). For higher current capacities as well as a version without inverter (LAE 234 LG) or for combined inverter systems (LAE 234 LGK), versions are available on request.\u003c\/p\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFeature\u003c\/th\u003e\n\n\u003cth\u003eValue\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSwitch\u003c\/td\u003e\n\n\u003ctd\u003eShore-Generator (LG) or Shore-Generator-Inverter (LGW)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCircuit breaker\u003c\/td\u003e\n\n\u003ctd\u003eRCBO 16 A \/ 30 mA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMains indicator lights\u003c\/td\u003e\n\n\u003ctd\u003e3\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eVoltmeter\u003c\/td\u003e\n\n\u003ctd\u003eAC 230 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOutput circuits\u003c\/td\u003e\n\n\u003ctd\u003e4 x 230 V \/ 50 Hz, each via two-pole thermal circuit breaker 10 A\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eConnection\u003c\/td\u003e\n\n\u003ctd\u003erear terminals\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\n\u003ctd\u003eW 210 x H 210 x D 110 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCut-out dimensions\u003c\/td\u003e\n\n\u003ctd\u003e186 x 186 mm (up to 12 mm per edge smaller than panel dimensions)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOrder no.\u003c\/td\u003e\n\n\u003ctd\u003e0 1000 2341\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003eThe LAE 234 LGW is suitable for Philippi's Series 200 circuit distributors. A SKZ-MOBIL labeling set for vehicle installation is also available on request.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the LAE 234 LGW compatible with the Series 200 circuit distributors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, the shore power unit is suitable for the Series 200 circuit distributors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to plan for an additional circuit breaker for the supply line?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, if the distance to the feed-in point is more than 3 m, the supply line must be additionally secured there with an MCB circuit breaker (e.g. LAE 205).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many circuits are available and how are they protected?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4 output circuits for AC 230 V \/ 50 Hz, each protected by two-pole thermal circuit breakers with 10 A; the main feed is additionally protected by an RCBO circuit breaker (16 A \/ 30 mA).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should the cut-out dimensions be?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cut-out can be up to 12 mm per edge smaller than the panel dimensions (210 x 210 mm), i.e. 186 x 186 mm.\u003c\/p\u003e\n\u003cp\u003eOrder now or contact us for advice on compatibility with your Series 200 switch panel.\u003c\/p\u003e","brand":"philippi","offers":[{"title":"Default Title","offer_id":52832151568721,"sku":"010002341","price":699.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0993\/2341\/2817\/files\/010002341_LAE234LGW_ee83b3a9-6f9b-41ad-93f1-e7b8c4f8bcf3.png?v=1775742663"}],"url":"https:\/\/www.philippi-online.de\/en\/collections\/ac-schalttafeln-marine.oembed","provider":"philippi elektrische systeme GmbH","version":"1.0","type":"link"}