Philippi System Monitor (PSM)
The PSM system monitor is the first step into digital communication on
board. It enables the monitoring and controlling of all connected philippi
PBUS compatible components, and is the central indicating and operating
interface of the EM-box. The PSM monitors, controls and manages the
electrical installation. The CAN-bus system design enables to connect more
than one system monitor side by side to obtain information about tanks,
batteries, energy management and AC-power simultaneously. Alternatively
several PSM system monitors may be installed on board at different locations
to obtain the required information independently of each other.
As the PSM system monitor operates as a central monitor, the system can
easily be enhanced incrementally from the smallest stage of expansion for
instance with only a shunt SHC as a battery monitor up to a multi system
monitor or a control panel in a digital switched CAN-bus system.
The combination of the system monitor PSM with a digital shunt SHC 300
as battery monitor for the main battery including voltage measurement for
a starter battery can be the first step for this new system. By fitting additional shunts SHC 300 for further batteries it`s easy to extend the system to your desire.
When a battery charger ALC is connected to the PBUS the system monitor
has automatically access to the battery charger functions. Or you install an
AC-interface ACW and get the informations about your AC - system. All
further connections of compatible PBUS components expand the system
monitor PSM to a multi function monitor. |
|
 PSM
|
Order-No: 0 7100 2000 |
|
The PSM system monitor is operated by a coloured TFT touch screen graphic
display, with adjustable brightness, connected to PBUS via a standard RJ45 cable.
Operation voltage: 8-60 V
Consumption: 30 mA, Stand-by: 1 mA
Dimensions: L 105 x B 105 x H 35 mm
Cut out: 88 x 88 mm
Deliverable: 3rd quarter 2010 |
Info
|
|
