Search
Distribution PanelsPower SupplyBatteriesSupervisionShore PowerConnection unitsBow stern switch overSwitch over unitsSwitch over units for several sourcesConnectorsIsolating transformerInstallationConnectorsLightingPBUS System

Connection units

Shore power connections are installed on-board to ensure a safe and problem- free power supply in accordance with GL - Germanischer Lloyd safety regulations and the European Standards EN ISO 13297 for AC power supply. An automatic RCBO-leakage protector in combination with a circuit breaker switch, which interrupte the power by means of a 30 mA two-pole cut-off in case of electrical fault, overloading and short circuit. When mounting a shore power connection unit more than three meters far from the source, a double pole circuit breaker switch is necessary near the shore power connection on board to protect against electrical accidents. Shore power connectors have to be completely watertight protected according to the IP 55 outside for rain protection or IP 56 to protect against over and under flow. Cables for AC 230 V installation such as DC12V/24V have to be carried in separate channels.
LAM LAM Order-No: 0 1000 0230

Mains indication light for the AC- system. The power indication light shows the correct electrical connection of the shore power.
Green light: all correctly connected
Red light: reverse polarity (live L and neutral N are changed)
Red flashing: protective earth conductor PE or neutral wire N are not connected

Dimensions W 105 x H 52,5 x D 50 mm

Manual      Info
LAE 100 LAE 100 Order-No: 0 1000 1003

Shore power connection unit for 230 V/50 Hz cycles supply with automatic double pole RCBO - leakage protection. The plastic housing protects against inadvertent contact with terminals. Connection on back of unit for 230 V via through lead clamps. Shorepower indicationlight shows correct connection.

RCBO Leakage Protector RCB 16A/0,03A 2-pole
Dimensions W 150 x H 185 x D 100 mm
Cut-out measurements W 125 x H 160 mm

Manual      Info
LAE 101 LAE 101 Order-No: 0 1000 1010

Shore power connection unit for 230 V/50 Hz cycles supply and Schuko-Socket. Shore power indication light. Connection at rear side of unit for 230 V via through lead clamps.

RCBO leakage protector RCBO 16A/0,03A 2-pole
Dimensions W 185 x H 150 x D 100 mm
Cut-out measurements W 160 x H 125 mm

Manual      Info
LAE 110 LAE 110 Order-No: 0 1000 1100

Shore power connection unit for 230 V/50 Hz cycles supply with automatic double pole RCBO - leakage protection and Schuko-socket. Other sockets (english/french/swiss) available. The plastic housing protects against inadvertent contact with terminals. Connection at back of unit for 230 V via through lead clamps.
Shorepower indicationlight shows correct connection.

Leakage protector RCB 16A/0,03A 2-pole
Dimensions W 260 x H 185 x D 100 mm
Cut-out measurements W 235 x H 160 mm

Manual      Info
LAE 110 FA LAE 110 FA Order-No: 0 1000 1105

Same as LAE 110 with additional double LED charging monitor for use of philippi charging units.
Manual      Info
LAE 111 LAE 111 Order-No: 0 1000 1110

Combined shore/generator or shore/inverter power unit for AC-power 230 V/50 Hz. with double pole switch over, current rating max. 25A, power-indicationlight shows correct power connection, voltmeter 250 V. 4 double pole thermal circuit breakers 10A. Connection via through lead clamps on the rear of the unit.

RCBO Leakage Protector RCBO 25A/0,03A 2-pole
Dimensions W 260 x H 185 x D 100 mm
Cut-out measurements W 235 x H 160 mm

Manual      Info
LAE 205 LAE 205 Order-No: 0 1000 2050

Double pole circuit breakers switch to protect wiring from the shore power connection and the unit with 3m or more. Water tight full plastic housing with flap cover. Protective system IP 65.

Circuit breaker MCB 16 A 2-pole
Dimensions W 80 x H 150 x D 97 mm

Manual      Info
LAE 211 LAE 211 Order-No: 0 1000 2110

Shore power connection unit for 230V/50Hz supply with additional socket. Power connection internally connected to clamps of the automatic double pole RCBO leakage protector. Cable lead with grommets. Water tight full plastic housing with flap cover. Protective system IPX4.

RCB Leakage protector RCB 16A/0,03A 2-pole
Dimensions W 80 x H 250 x D 92 mm

Replacement part for shore power unit LAE 210.

LAE 220 LAE 220 Order-No: 0 1000 2201

Shore power connection unit for 230 V/50 Hz supply. Circuits are connected inside to the clamps of the automatic double pole RCBO leakage protector. Cable lead with grommets. Watertight full plastic housing with flap cover. Protective system IP 65.

RCBO Leakage protector RCB 16A/0,03A 2-pole
Dimensions W 80 x H 150 x D 97 mm

Manual      Info
LAE 230 LAE 230 Order-No: 0 1000 2300

Shore power connection unit for 230V/50Hz supply with 4 additional circuit breakers switches, type MCB 10.. Power connection internally connected to clamps of the automatic double pole RCBO leakage protector. Cable lead with grommets. Water tight full plastic housing with flap cover. Protective system IPX4.

RCBO Leakage protector RCB 16A/0,03A 2-pole
Circuit breaker 2 x MCB 10 (10 A) 2-polig
Dimensions W 160 x H 200 x D 115 mm

Info
LAE 232 LAE 232 Order-No: 0 1000 2320

Shore power unit with automatic double pole RCBO leakage protector (16A/ 30mA). Shorepower indicationlight shows correct connection. 2 double pole thermal circuit breakers 10 A for 230V / 50 Hz. Connection with terminal clamps on back side. For safety reasons the panel has to be installed so that the reverse side is covered and only accessible with the help of tools.

Leakage protector RCBO 16A/0,03A 2-pole
Dimensions W 105 x H 210 x D 100 mm

Manual      Info
LAE 233 LAE 233 Order-No: 0 1000 2332

3 double pole power circuits with thermal circuit breakers 10A for AC 230V / 50 Hz.
For safety reasons the panel has to be installed so that the reverse side is covered and only accessible with the help of tools.
Important: a RCBO leakage protector has to be installed before the panel.

Dimensions W 105 x H 105 x D 70 mm

Manual     
LAE 234 LG LAE 234 LG
LAE 234 LGW
Order-No: 0 1000 2340
Order-No: 0 1000 2341

Shore power unit with automatic double pole RCBO leakage protector (16A/ 30mA). Shorepower indicationlight shows correct connection to the shore power supply.
2 power monitor lights for generator and inverter. 4 double pole thermial circuit breakers 10 A for AC 230 V/50 Hz. Shore- Generator-(LG) or Shore-Generator-Inverter (LGW) -switch over and voltmeter 230 V/50 Hz. Connection with terminal clamps on back side. For safety reasons the panel has to be installed so that the reverse side is covered and only accessible with the help of tools.

Leakage protector RCBO 16A/0,03A 2-pole
Dimensions W 210 x H 210 x D 110 mm

Manual      Info
LAE 234 LGK LAE 234 LGK Order-No: 0 1000 2342

Shore power unit for inverter/charger- combination with shore-generator-switch over with limit of use of consumers while the inverter is running. RCBO leakage protector
(32 A/30 mA), 1 power indication and 2 monitor lights and 4 double pole thermal circuit breakers 10 A for AC 230 V/50 Hz. Shore-generator-switch over (25A) and voltmeter 230 V. Connection with terminal clamps on rear side. Generator set max. 6 kW. Stronger models on request.

Dimensions W 210 x H 210 x D 110 mm

Manual      Info
LAE 235 LAE 235 Order-No: 0 1000 2350

Shore power unit with automatic double pole RCBO leakage protector (16A/ 30mA). Shorepower indicationlight shows correct connection. Schuko socket. Other sockets (english/french/swiss) available. Connection with terminal clamps on back side. For safety reasons the panel has to be installed so that the reverse side is covered and only accessible with the help of tools.

RCBO Leakage protector RCB 16A/0,03A 2-pole
Dimensions W 105 x H 210 x D 100 mm

Manual      Info
LAE 236 LAE 236 Order-No: 0 1000 2362

6 double pole power circuits with thermal circuit breakers 10A for AC 230V / 50 Hz.
For safety reasons the panel has to be installed so that the reverse side is covered and only accessible with the help of tools.
Important: a RCBO leakage protector has to be installed before the panel.

Dimensions W 105 x H 210 x D 70 mm

Manual      Info
3130-F12B-H7T1-W24AR7-6A 3130-F12B-H7T1-W24AR7-6A
3130-F12B-H7T1-W24AR7-10A
3130-F12B-H7T1-W24AR7-16A
Order-No: 1 3130 5006
Order-No: 1 3130 5010
Order-No: 1 3130 5016

Double pole AC 230 V double pole rocker switch/thermal circuit breaker.
Cut out dimensions 26,3 x 34,2 mm, Width 29,3mm
Info